Ford Aspire Catalytic Converter

EASTERN CATALYTIC CONVERTER -- 49-state legal, OBDII; Not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2 in. inlet; 2 in. outlet; Single inlet and outlet configuration; 5 in. x 10 in. body, 14 in. overall length; 4,250 lb. GVW; With one oxygen sensor port; Without air tube provision; Ceramic honeycomb catalyst substrate; Round body; 409 stainless steel casing; Constructed using Eastern's proprietary NANO technology chemistry that yields highly efficient loadings for lower cost and better converter efficiency; Features high flow design that maximizes engine output and catalytic efficiency; Non-directional and can be installed either way; Modification of the exhaust may be required; For low emission vehicles only; With Eastern's 5-year or 50,000-mile warranty.

Fits the following 1994-1997 Ford Aspire submodels:

• 1994-1995: SE; 4 Cyl 1.3L; "GAS, FI, VIN H"
• 1994-1997: Base; 4 Cyl 1.3L; "GAS, FI, VIN H"

EASTERN DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, OBDII, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2-bolt spin type inlet; 2-bolt spin type outlet; Single inlet and outlet configuration; 13 in. overall length; Standard converter type; Ceramic honeycomb catalyst substrate; Round metal casing; Built to exact OE dimensions with OE quality flanges and flex assemblies; Features Eastern's proprietary catalytic chemistry and high flow design that maximizes engine output and catalytic efficiency; Easy installation; No welding and cutting required; With Eastern's 5-year or 50,000-mile warranty.

Fits the following 1994-1997 Ford Aspire submodels:

• 1994-1995: SE; 4 Cyl 1.3L; "GAS, FI, VIN H"
• 1994-1997: Base; 4 Cyl 1.3L; "GAS, FI, VIN H"

CATCO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, OBDII, not legal for sale or use in California; Cannot be shipped to California addresses; 2-bolt flange with female flare inlet; 2 in. flat flare outlet; Single inlet and outlet configuration; 13.25 in. overall length; Includes heat shield and necessary gasket for a complete installation; Ceramic monolith catalyst substrate; Oval stainless steel casing; Designed with 409 stainless steel pipes and shell for longer life; With Catco's 5-year or 50,000-mile warranty on converter body and 25,000-mile warranty on emissions.

Fits the following 1994-1997 Ford Aspire submodels:

• 1994-1995: SE; 4 Cyl 1.3L;
• 1994-1997: Base; 4 Cyl 1.3L;

MAGNAFLOW 91000 SERIES CATALYTIC CONVERTER -- 49-state legal, OBDII, EPA compliant, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2 in. inlet and outlet; Single inlet and outlet configuration; 9 in. body length, 6.5 in. width, 4 in. thick, 13 in. overall length; 4,500 lb. GVW; Includes stainless steel heat shield; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; Designed for use with small to medium sized engine displacements where space is limited; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers; With Magnaflow's limited warranty.

Fits the following 1994-1995 Ford Aspire submodels:

• 1994-1995: Base; 4 Cyl 1.3L; "Gas, FI, Naturally Aspirated, VIN H"
• 1994-1995: SE; 4 Cyl 1.3L; "Gas, FI, Naturally Aspirated, VIN H"

MAGNAFLOW 9900 HEAVY METAL SERIES CATALYTIC CONVERTER -- Oval casing; Single 2 in. center inlet; Single 2 in. center outlet; 9 in. x 6.5 in., 13 in. overall length; Pre-cat converter type; Heavy metal loaded catalyst; The main benefit of this catalytic converter is that one unit may cover a wide variety of vehicle makes and models; 49-state legal OBDII, for pre-OBDII only when used on California-registered vehicles; Installing this converter often requires the use of welding, cutting, and tube bending equipment that is readily available to most professional installers; With Magnaflow's limited warranty.

Fits the following 1996-1997 Ford Aspire submodels:

• 1996-1997: Base; 4 Cyl 1.3L; "Gas, FI, Naturally Aspirated, VIN H"

MAGNAFLOW DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, OBDII, EPA compliant, not for sale or use in California; Cannot be shipped to California addresses; 3-way catalyst style; 2 in. female flare flange inlet; Flange outlet; Single inlet and outlet configuration; 13.5 in. overall length; Includes stainless steel heat shield; Ceramic honeycomb catalyst substrate; Oval stainless steel casing; Designed to exact original equipment specifications; While the majority of the direct fit catalytic converter products do not require welding, cutting, or bending, limited applications may require additional welding for optimal installation; Easy bolt-on installation; With Magnaflow's limited warranty.

Fits the following 1994-1997 Ford Aspire submodels:

• 1994-1995: SE; 4 Cyl 1.3L; "Gas, FI, Naturally Aspirated, VIN H"
• 1994-1997: Base; 4 Cyl 1.3L; "Gas, FI, Naturally Aspirated, VIN H"

DAVICO DIRECT FIT CATALYTIC CONVERTER -- 49-state legal, not for sale or use in California; Cannot be shipped to California addresses; 13.25 in. overall length; Gaskets and spring-bolt kits are supplied when necessary; Does not require cutting, sliding, clamping, or welding for installation; With Davico's 5-year or 50,000-mile warranty on converter shell and 1-year warranty on craftsmanship and materials after the installation date of the unit.

Fits the following 1994-1997 Ford Aspire submodels:

• 1994-1995: SE; 4 Cyl 1.3L;
• 1994-1997: Base; 4 Cyl 1.3L;