Buick Invicta Clutch Kit

HOLLEY PRO-JECTION THROTTLE BODY INJECTION SYSTEM -- 670 CFM; Throttle body injection; Speed density metering; Die cast aluminum throttle body; Dual 85 lb./hour injectors; 12 to 22 psi adjustable pressure regulator; Adjustable fast idle solenoid; 4-barrel square bore throttle body mounting flange; Includes EMC, Fuel Pressure Regulator, fuel pump, IAC motor, IAT sensor, injectors, MAP sensor, and TPS; A complete stand alone system that converts a carbureted engine to fuel injection without the use of a laptop; Supports up to 275 h.p.; Retro-fits only carbureted, non-computerized V-8 engines; Its digital ECU is user-adjustable for idle, accelerator pump, main, high RPM, and choke; Has self-priming, in-line electric gerotor fuel pump that is rated at 300 lb./hr. at 15 psi; Features wiring harness designed for plug-in installation; Temperature-insulated and weather-sealed; Benefits include improved driveability, fantastic throttle response, greater fuel economy, and increased power; Works with the factory air cleaner assembly; The installed height of TBI is not greater than standard carburetor; With Holley's limited warranty.

Fits the following 1960-1963 Buick Invicta submodels:

• 1960-1963: Base; 8 Cyl 6.6L;

NEWARK AUTO PRODUCTS CUSTOM-TAILORED CARPET KIT, POLYPROPYLENE LOOP, BLACK

The Newark Auto Products carpet kit keeps interior warmer in winter and cooler in summer. This is a good replacement for worn carpeting or upgrading a bare metal floor.

Features:

• Made of highly twist polypropylene loop carpet
• Detailed with sewn-in contours to perfectly fit your vehicle's floor curves and center hump
• Vinyl heel pad that matches the carpet
• Extra thick padding for comfort and insulation
• Has exposed edges that are protected with reinforced binding
• Adds life to your vehicle's interior making it look new

Notes:

• From firewall to front of the front seat

Fit Note:	4-Door, Hardtop
Location:	Front
Material:	Loop carpet
Type:	Direct fit
Color/Finish:	Black
Quantity Sold:	Kit

Fits the following 1959-1959 Buick Invicta submodels:

• 1959-1959: Base; All Engines;

GATES POWER STEERING PUMP SEAL KIT -- Consists of OE replacement seals needed to repair your power steering pump.

Fits the following 1960-1963 Buick Invicta submodels:

• 1960-1963: Base; 8 Cyl 6.6L; "GAS"

PETRONIX IGNITOR ELECTRONIC IGNITION KIT -- -50?F To 300?F Working Temperature Range, 0-15,000 Rpm Range, This Easy To Install And Maintenance Free Electronic Ignition System Features Solid-State Electronics And Rotating Cobalt Magnets Which Triggers Hall Effect Integrated Circuit, It Doubles Voltage Delivery To Spark Plugs, Provides A 2:1 Improvement Over Point Type System In Current Fall Time, Has Stable Timing, Fits Inside The Distributor, Compatible With 12-Volt Negative Ground Systems, Deterioration Free Due To Electronics Molded In Epoxy, Performs Optimally When Used With 40,000 Volts Flame-Thrower Coil, Includes Manufacturer's Limited 30 Month Warranty

Fits the following 1959-1963 Buick Invicta submodels:

• 1959-1963: Base; 8 Cyl 6.6L;

STANDARD ELECTRONIC IGNITION CONVERSION KIT -- 2 electric connectors, 2 terminals; Includes hardware and wiring connector; A high quality, direct fit OE replacement electronic ignition conversion kit; With 3-year or 36,000-mile Standard limited warranty.

Fits the following 1959-1963 Buick Invicta submodels:

• 1959-1963: Base; 8 Cyl 6.6L;

MALLORY UNILITE CONVERSION KIT -- Improves Performance And Fuel Efficiency, Stable Ignition Timing From 1 RPM To 10,000, Easy To Install With Simple Hand Tools And Reduced Maintenance, With Thermal Clad Based Surface Mount Construction For Maximum Dependability And Long Life, Includes Distributor Cap With Part Number 250, Requires Mallory Coils 29219 29450 Or 30450 For Matched Performance, With Manufacturer's 1-Year Limited Warranty

Fits the following 1959-1963 Buick Invicta submodels:

• 1959-1963: All Submodels; All Engines;

ACCEL POINTS ELIMINATOR KIT -- For vehicles with AC Delco single and dual point distributors; Designed with the latest thermal clad based surface mount construction for maximum dependability and long life; Utilizes a specialized electronic circuitry and an infrared signal; Ignition timing is stable from 1 to 10,000 rpm; Features a more accurate ignition timing than any other type of system, improves performance and fuel efficiency, and offers reduced maintenance; Easy installation with hand tools; With 90-day Accel limited warranty.

Fits the following 1959-1963 Buick Invicta submodels:

• 1959-1963: All Submodels; All Engines;

HAYDEN FLUID COOLER MOUNTING KIT, PLASTIC, NATURAL -- Includes 4 clamps and 4.5 ft. transmission oil cooler hose; A high quality, direct fit OE replacement fluid cooler mounting kit.

Fits the following 1960-1963 Buick Invicta submodels:

• 1960-1963: Base; All Engines;

AC DELCO STEERING GEAR INPUT SHAFT SEAL KIT -- This high quality steering gear input shaft seal kit directly replaces OE number 19146617.

Fits the following 1959-1963 Buick Invicta submodels:

• 1963-1963: Base; 8 Cyl 6.6L; "GAS, CARB, JT, Naturally Aspirated"
• 1963-1963: Base; 8 Cyl 6.6L; "GAS, CARB, JU, Naturally Aspirated"

• 1962-1962: Base; 8 Cyl 6.6L; "GAS, CARB, 4I, Naturally Aspirated"

• 1962-1962: Base; 8 Cyl 6.6L; "GAS, CARB, L4I, Naturally Aspirated"

• 1961-1961: Base; 8 Cyl 6.6L; "GAS, CARB, 4H, Naturally Aspirated"

• 1961-1961: Base; 8 Cyl 6.6L; "GAS, CARB, L4H, Naturally Aspirated"

• 1960-1960: Base; 8 Cyl 6.6L; "GAS, CARB, 4G, Naturally Aspirated"

• 1959-1959: Base; 8 Cyl 6.6L; "GAS, CARB, Naturally Aspirated"

Fits 6 more submodels. (Show all) Show less info

ALTO PRODUCTS HEAVY-DUTY TRANSMISSION REBUILDING KIT, ALUMINUM -- Ensures transmission will operate at its best even after long hard use; Features heavy-duty clutch made of special materials with super-high friction coefficient for dramatically reduced wear, shift reprogramming kit that improves response, ends slippage and lag, and sets performance level for street, competition or RV/heavy-duty; Designed with quality components that are constructed to meet the most demanding performance needs including friction plates, steel plates, all necessary rings, seals, complete gasket, and rubber kit; Heavy-duty strengthening parts sold separately.

Fits the following 1962-1963 Buick Invicta submodels:

• 1962-1963: All Submodels; All Engines;

MCGAUGHYS BIG BRAKE DISC AND CALIPER KIT, CROSS-DRILLED, VENTED, FOR 2 WHEELS -- 5 x 5 in. bolt pattern; 13 in. diameter; Consists of brake discs, calipers with brake pads and e-brake hardware, brackets, hoses, banjo bolts, and copper washers; Requires 17 in. diameter or larger wheels to use the spindles; Minor modifications required to use stock 17 in. wheels.

Fits the following 1959-1963 Buick Invicta submodels:

• 1959-1963: Base; All Engines;

CENTRIC WHEEL CYLINDER KIT -- 1 in. diameter; This is a high quality, OE replacement wheel cylinder kit.

Fits the following 1960-1963 Buick Invicta submodels:

• 1960-1963: All Submodels; All Engines;

HAYS STREET/STRIP CLUTCH DISC, ORGANIC -- 10.5 in. diameter, 10-spline by 1.125 in., borg and beck type, diaphragm pressure plate style; Engineered specifically for high horsepower street vehicles and occasional dragstrip use, manufactured with premium quality and high burst strength woven lining to withstand heat and higher engine rpm; Riveted to a Marcel backing and heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter; With 90-day Hays limited warranty.

Fits the following 1963-1963 Buick Invicta submodels:

• 1963-1963: All Submodels; All Engines;