International 150 Clutch Kit

FAN CLUTCH, SOLD INDIVIDUALLY

Replacement OE Comparable Fan Clutch is an affordable replacement unit for your old or damaged original part.

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in body parts and lighting products; it also stocks OE comparable electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L;

HAYDEN FAN CLUTCH -- Standard-Duty Thermal Design, Standard Rotation, Varies The Fan Speed With Temperature Of The Air Behind The Radiator, Engaged High Speed Operation Provides Maximum Cooling, Disengaged Low Speed Operation Provides Fuel Savings And Noise Reduction, Offers Greater Life Expectancy Than A Non-Thermal Clutch, Briefly Engaged At Cold Start-Up, Engages At About 170 Degrees Radiator Air Temperature About 30 Degrees Lower Than Coolant Temperature, With Hayden's Limited 1-Year Warranty

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L;

GRANT STEERING WHEEL INSTALLATION KIT -- Includes die-cast hubs, Grade 5 hardware, matte black trim pieces, and step-by-step instructions; Not designed for vehicle equipped with air bag or telescopic column or radio and cruise controls mounted on steering wheel.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;

4-SEASONS SEVERE DUTY THERMAL FAN CLUTCH -- Standard rotation; A high quality, direct fit OE replacement severe duty thermal fan clutch; With 12-month or 12,000-mile 4-Seasons limited warranty.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L;

GATES POWER STEERING PUMP SEAL KIT -- Consists of OE replacement seals needed to repair your power steering pump.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L; "GAS"
• 1975-1975: Base; 8 Cyl 5.6L; "GAS"

• 1975-1975: Base; 8 Cyl 6.4L; "GAS"

Fits 1 more submodels. (Show all) Show less info

MALLORY E-SPARK CONVERSION KIT -- Uses Specialized Electronic Circuitry And Infrared Signal Translating To Stable Ignition Timing From 1 RPM To 10,000 RPM, Improves Performance And Fuel Efficiency, Features The Latest Thermal Clad Based Surface Mount Construction For Maximum Dependability And Durability, Reduces Maintenance, Easy Installation, For Use With Mallory Automotive, Industrial, And Marine Distributors With Mechanical Advance Only, With Mallory's 1-Year Limited Warranty

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L;
• 1975-1975: Base; 8 Cyl 5.6L;

• 1975-1975: Base; 8 Cyl 6.4L;

Fits 1 more submodels. (Show all) Show less info

TIMKEN DIFFERENTIAL REBUILD KIT -- This is a high quality, OE replacement differential rebuild kit.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;

MOTIVE GEAR RING AND PINION INSTALLATION KIT -- Facilitates easy installation of a Dana 44 ring and pinion; Consists of pinion shims, carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolt, and cover gasket.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;

BENDIX BRAKE HARDWARE KIT -- Made from durable material that is abrasion resistant; Designed to provide excellent braking performance; This is a high quality, OE replacement brake hardware kit; Easy installation.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; All Engines;

VISION X FLEX-MOTION FLEXIBLE UNDERCAR KIT, WHITE -- 12V DC; 9 number patterns; Includes two 4 in. bars, two 3 in. bars, master controller, wireless remote, sound interface, distribution block, and installation hardware; Features Bar Reflector Technology for spotless and seamless illumination down to one inch, flexible impact resistant tube, durable weatherproof housing, 1,000 ft. range wireless remote for full control over your under car kit, and master controller which controls the built-in microphone for sound interface into your vehicle's stereo systems with scanning, strobe, and running modes; Three times brighter than neon and has 200,000 hours expected life; Can be used as a standard under car kit or wrapped in wheel wells, around custom speaker enclosures, under seats, or wherever else other kits cannot go; For automotive, marine, and off-road applications.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;

AC DELCO STEERING GEAR INPUT SHAFT SEAL KIT -- This high quality steering gear input shaft seal kit directly replaces OE number 19146617.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated"
• 1975-1975: Base; 8 Cyl 5.6L; "GAS, CARB, Naturally Aspirated"

• 1975-1975: Base; 8 Cyl 6.4L; "GAS, CARB, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

TRIM PARTS MOLDED CARPET KIT, CUTPILE, SILVER

Make your car's interior look trendy and stylish with these custom-made carpets from Trim Parts, Inc. These carpets are the only GM-licensed molded carpet in the automotive restoration business. Trim Parts Molded Carpet Kits are hand assembled and inspected to ensure high quality. These carpets have different modish styles and attention-grabbing colors to choose from, all of which are formed to the floor of your vehicle.

Features:

• 80 in. width
• GM-licensed
• Made from 100% nylon cutpile
• Hand assembled
• Custom designed to perfectly fit vehicle flooring
• Exceeds OEM specifications
• Easy installation

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;

SUPERWINCH TRAILER WIRING KIT, BLACK -- 5,000 to 16,500 lbs. capacity; 25 in. lead; Includes the correct gauge wire and quick-disconnect connections; Allows efficient wiring of your winch from the front of the truck or trailer; For use on S5000, S6000, S9001, X6CD, X9, EP6, and EP9 series winches; Easy installation.

Fits the following 1975-1975 International 150 submodels:

• 1975-1975: All Submodels; All Engines;