Chrysler Cold Air Intake

K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS

• Guaranteed to improve acceleration and power
• Specifically designed to fit your vehicle's engine compartment
• Simple installation, typically in less than 90 minutes
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Backed by the legendary K&N Million Mile Warranty
• CARB Exempt and street legal in all 50 states

Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!

All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.

Note: Some K&N 57 Series systems won't not fit on applications with lift kits.

Fits the following 2005-2010 Chrysler 300 submodels:

• 2010-2010: S; 8 Cyl 5.7L;
• 2005-2010: C SRT8; 8 Cyl 6.1L;

• 2005-2010: C; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

AFE MAGNUM FORCE STAGE 1 CX COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 6.5 h.p. and 12 lb.-ft. of torque; Increases airflow up to 50 percent; 99.2 percent filtration efficiency; Up to 416 CFM; Includes Pro Dry S air filter that is made of two layers of randomly porous synthetic fabric; Comes with durable 16-gauge powdercoated steel heat shield that seals to the hood, molded plastic intake tube with black OE look finish, and pre positioned PEM-nuts for faster and easier installation; Delivers a throaty performance sound; Features a bold and simple construction that provides more airflow, equating to greater power and better acceleration; Replaces the entire stock air box and retains the stock intake tube; Its larger, washable, and reusable lifetime filter with 360-degree radial free flowing conical design accelerates and enhances airflow; No cutting or drilling required; It has pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes.

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: Limited; 6 Cyl 3.5L;
• 2005-2008: Touring; 6 Cyl 3.5L;

• 2005-2007: Base; 6 Cyl 2.7L;

Fits 1 more submodels. (Show all) Show less info

KOOL VUE 2000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM

This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!

Features and Benefits:

• Increases fuel mileage
• Up to 99 percent filtration efficiency
• Provides additional power up to 9.15 h.p. at 4700 RPM
• Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter

Parts Included:

• Heat shield
• Intake tube
• Premium red air filter
• All necessary hardware for easy installation

Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.

Fits the following 2005-2007 Chrysler 300 submodels:

• 2005-2007: C SRT8; 8 Cyl 6.1L;
• 2005-2007: C; 8 Cyl 5.7L;

AIRAID QUICKFIT INTAKE SYSTEM

Airaid's QuickFit intake system is specifically designed to get more out of an engine using the vehicle's stock cold-air inlet and filter housing and augment it with a washable and reusable Airaid air filter for optimum filtration. It features an exclusive design that feeds air directly into the intake system and isolates hot air from the filter for a denser charge.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Without tube

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Without intake tube
• Product legal for sale in California under Executive Order (EO) number D-609-5. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 2006-2010 Chrysler PT Cruiser submodels:

• 2010-2010: Classic; 4 Cyl 2.4L;
• 2010-2010: Couture Edition; 4 Cyl 2.4L;

• 2008-2009: LX; 4 Cyl 2.4L;

• 2006-2009: Base; 4 Cyl 2.4L;

• 2006-2009: Limited; 4 Cyl 2.4L;

• 2006-2009: Touring; 4 Cyl 2.4L;

• 2006-2007: GT; 4 Cyl 2.4L;

• 2006-2006: Street Cruiser; 4 Cyl 2.4L;

Fits 6 more submodels. (Show all) Show less info

AEM BRUTE FORCE AIR INDUCTION SYSTEM

AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• With heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 2005-2010 Chrysler 300 submodels:

• 2010-2010: S; 6 Cyl 3.5L;
• 2005-2010: Limited; 6 Cyl 3.5L;

• 2005-2010: Touring; 6 Cyl 3.5L;

• 2009-2009: Signature Series; 6 Cyl 3.5L;

Fits 2 more submodels. (Show all) Show less info

INJEN POWER-FLOW COLD AIR INTAKE

Injen's Power-Flow cold air intake features patent pending Mega Ram technology. This technology regulates the volume and velocity of the charged airflow by using variable and calibrated diameter aluminum tubes that results to massive performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Polished tube finish
• 6061 T-6 aluminum tube material

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Fine-tuned for specific applications

Fits the following 2005-2010 Chrysler 300 submodels:

• 2010-2010: S; 8 Cyl 5.7L;
• 2005-2010: C; 8 Cyl 5.7L;

BBK COLD AIR INDUCTION SYSTEM

BBK's cold air induction system is designed with the latest technology that provides maximum horsepower, torque and improved throttle response.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• Aluminum tube material

Features

• Provides power up to 21 h.p.
• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: C SRT8; 8 Cyl 6.1L;