Ford Mustang Cold Air Intake

K&N 69 SERIES TYPHOON HIGH FLOW PERFORMANCE SPORT COMPACT AIR INTAKE KITS

• Guaranteed to improve horsepower and acceleration in your sport compact
• Utilizes only the finest quality components
• Simple installation, typically in less than 90 minutes
• Available in high-quality finishes to fit your build
• Backed by the legendary K&N Million Mile Warranty
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Street legal in most states (some parts not approved for use in California - please check part details or call for more information)

Made for show and go, the K&N 69 Series Typhoon intake systems feature high-flow mandrel bent aluminum tubing engineered to fit most sport compact performance vehicles. Each kit is dyno-tested and proven to increase horsepower and torque. These high-performance air intakes rush fresh, cool air into your motor by replacing the OE air path with a high-flow aluminum tube. This rush of cool air immediately translates into more power from your engine!

All 69 Series Typhoon intake kits include an oversized & tapered high-flow air filter engineered to provide more surface area and capture more dust. The enlarged surface area flows more air volume to the motor and captures more dirt, extending the service life between cleanings (up to 100,000 miles).

• Series: 69 Series Typhoon
• Type: Cold-Air Intake System, 50-state legal
• Quantity Sold: Assembly
• Warranty: Million-mile K&N limited warranty

Fits the following 2005-2009 Ford Mustang submodels:

• 2005-2009: Base; 6 Cyl 4.0L;

aFe MagnumForce Stage 2 Performance Cold Air Intake System

Features:

• Up to 75% improved airflow
• Improved throttle response, acceleration and fuel efficiency
• Up to 60 ft./lbs. more torque! Up to 50 HP gains!
• Includes either aFe Pro Dry S or Pro 5R oil-free filter - the easiest to service!
• Works with all stock electronics
• Easy installation with no cutting or drilling
• Heavy-duty 16 gauge steel air box
• Reusable, washable filter

aFe MagnumForce Stage 2 cold air kits replace the factory intake hose, air box and filter with the largest possible parts while still retaining the factory mounts. The larger intake hose, air box and huge aFe air filter provide more fresh, cold air to your motor which creates more power. Also comes with the largest aFe filter possible inside the new air box. aFe filters are easier to service than oil-impregnated or foam filters - simply tap it, vacuum it or wash it with soap and water to clean. Comes with limited lifetime warranty.

• Series: aFe MagnumForce Stage 2
• Type: With tube, 50-state legal
• Quantity Sold: Assembly

Fits the following 2005-2009 Ford Mustang submodels:

• 2008-2009: Bullitt; 8 Cyl 4.6L;
• 2005-2009: GT; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;

KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 7.3 h.p. at 5000 RPM and 7.6 lb.-ft. of torque at 5000 RPM; Up to 99 percent filtration efficiency; Includes premium red air filter, intake tube, heat shield, and all necessary hardware for easy installation; Features polished intake tubing that is made of lightweight T-6061 aluminum; Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter; Backed by 2-year Kool Vue limited warranty.

• Series: Kool Vue 1000
• Type: With tube, 49-state legal - no CA shipments
• Quantity Sold: Assembly
• Warranty: 2-year Kool Vue limited warranty

Fits the following 1996-2003 Ford Mustang submodels:

• 2003-2003: Mach I; 8 Cyl 4.6L;
• 2003-2003: SVT Cobra 10th Anniversary; 8 Cyl 4.6L;

• 1996-2003: GT; 8 Cyl 4.6L;
• 1996-2003: SVT Cobra; 8 Cyl 4.6L;
• 2001-2001: GT Bullitt; 8 Cyl 4.6L;

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam and mounting hardware included
• Black tube finish
• Plastic tube material

• Provides power up to 12-18 h.p.
• Up to 820 CFM
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

• Product legal for sale in California under Executive Order (EO) number D-609-7. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

• Series: Airaid Cold air dam
• Type: With tube, 50-state legal
• Quantity Sold: Assembly
• Warranty: Lifetime Airaid limited warranty

Fits the following 2005-2009 Ford Mustang submodels:

• 2008-2009: Bullitt; 8 Cyl 4.6L;
• 2005-2009: GT; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;

AEM BRUTE FORCE AIR INDUCTION SYSTEM

AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Silver tube finish
• T-6063 aluminum tube material

• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

• Product legal for sale in California under Executive Order (EO) number D-670-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

• Series: AEM Air Brute Force
• Type: With tube, 50-state legal
• Quantity Sold: Assembly
• Warranty: Lifetime AEM limited warranty

Fits the following 1996-2004 Ford Mustang submodels:

• 2003-2004: GT; 8 Cyl 4.6L; "Naturally Aspirated, VIN X"
• 2003-2004: Mach I; 8 Cyl 4.6L; "Naturally Aspirated, VIN X"

• 2000-2002: GT; 8 Cyl 4.6L;
• 2001-2001: GT Bullitt; 8 Cyl 4.6L; "VIN X"
• 1996-2001: GT; 8 Cyl 4.6L; "VIN X"
• 1996-2001: SVT Cobra; 8 Cyl 4.6L; "VIN X"

INJEN POWER-FLOW COLD AIR INTAKE

Injen's Power-Flow cold air intake features patent pending Mega Ram technology. This technology regulates the volume and velocity of the charged airflow by using variable and calibrated diameter aluminum tubes that results to massive performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• 6061 T-6 aluminum tube material

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Fine-tuned for specific applications

• Series: Injen Power-flow
• Type: With tube, 49-state legal - no CA shipments
• Quantity Sold: Assembly
• Warranty: Lifetime Injen limited warranty

Fits the following 2007-2009 Ford Mustang submodels:

• 2008-2009: Bullitt; 8 Cyl 4.6L;
• 2007-2009: GT; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;

SPECTRE MODERN MUSCLE COLD AIR INTAKE KIT

Spectre's Modern Muscle cold air intake kit boosts your vehicle's horsepower and torque for a stronger drive. It increases airflow for more power behind the pedal and, under normal driving conditions, it can pick up your fuel economy by a few miles per gallon. It uses high flow Spectre air filter that provides superior filtration and better air flow for optimum performance.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• Aluminum tube material

• Washable and reusable air filter

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

• Series: Spectre Modern muscle
• Type: With tube, 49-state legal - no CA shipments
• Quantity Sold: Assembly

Fits the following 2005-2009 Ford Mustang submodels:

• 2008-2009: Bullitt; 8 Cyl 4.6L;
• 2005-2009: GT; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;

BBK POWER-PLUS COLD AIR INTAKE KIT

BBK's Power-Plus cold air intake kit is designed with the latest technology that provides maximum horsepower, torque and improved throttle response.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• Aluminum tube material

• Provides power up to 10 to 15 h.p.
• Washable and reusable air filter

• Product legal for sale in California under Executive Order (EO) number D-245-14. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

• Fit Note: With Mass Air Flow
• Series: BBK Power-plus
• Type: With tube, 50-state legal
• Quantity Sold: Assembly
• Warranty: 1-year BBK limited warranty

Fits the following 2005-2009 Ford Mustang submodels:

• 2008-2009: Bullitt; 8 Cyl 4.6L;
• 2005-2009: GT; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;