
Ford Ranger Cold Air Intake
We Have 5 Items for Ford Ranger Cold Air Intake In-Stock.
2004-2008 Ford Ranger Cold Air Intake - K&N - 57 Series FIPK, With tube, 50-state legal
Part Number: K33572560 Manufacturer Number: 57-2560Save $197.75
K&N 57 SERIES AIRCHARGER HIGH PERFORMANCE AIR INTAKE KITS
- Guaranteed to improve acceleration and power
- Specifically designed to fit your vehicle's engine compartment
- Simple installation, typically in less than 90 minutes
- Washable & reusable air filter lasts up to 100,000 miles before needing service
- Backed by the legendary K&N Million Mile Warranty
- CARB Exempt and street legal in all 50 states
Improve throttle response and power in your vehicle with a K&N 57 Series Aircharger high-performance cold air intake. These high-flow intake kits provide better air flow to your motor by replacing the factory air path with a larger diameter polyethylene tube. This charge of fresh air allows your motor to breathe better and immediately put out more power!
All 57 Series high-flow intakes include the largest conical high-performance filter that will fit in your engine compartment and still use OE holes and mounting points. The bigger filter surface area also allows more air to flow into the engine and captures more dirt, boosting service intervals up to up to 100,000 miles.
Note: Some K&N 57 Series systems won't not fit on applications with lift kits.
- Series: 57 Series FIPK
- Type: With tube, 50-state legal
- Quantity Sold: Assembly
- Warranty: Million-mile K&N limited warranty
Fits the following 2004-2008 Ford Ranger submodels:
- 2006-2008: Sport; 6 Cyl 3.0L;
- 2004-2008: XL; 6 Cyl 3.0L;
2005-2008 Ford Ranger Cold Air Intake - AFE - AFE Full Metal Power, With tube, 49-state legal - no CA shipments
Part Number: A15F203008 Manufacturer Number: F2-03008Save $49.50
aFe Full Metal Power Cold Air Intake System
Features:
- Up to 75% improved airflow
- Improved throttle response, acceleration and fuel efficiency
- Up to 60 ft./lbs. more torque! Up to 50 HP gains!
- Includes an aFe Pro Dry S oil-free filter - the easiest to service!
- Works with all stock electronics
- Easy installation with no cutting or drilling
- Reusable, washable filter
aFe Full Metal Power cold air kits replace the factory intake hose with a giant 4" mandrel-bent gun-metal grey anondized aluminum tube and a conical aFe Pro Dry S filter. The larger intake and huge aFe air filter provide more fresh, cold air to your motor which creates more power. aFe Pro Dry S filters are easier to service than oil-impregnated or foam filters - simply tap it, vacuum it or wash it with soap and water to clean. Comes with limited lifetime warranty.
- Series: AFE Full Metal Power
- Type: With tube, 49-state legal - no CA shipments
- Quantity Sold: Assembly
- Warranty: 2-year AFE limited warranty
Fits the following 2005-2008 Ford Ranger submodels:
- 2006-2008: Sport; 6 Cyl 3.0L;
- 2005-2008: XL; 6 Cyl 3.0L;
2004-2011 Ford Ranger Cold Air Intake - Airaid - Airaid QuickFit, Without tube, 50-state legal
Part Number: A86401194 Manufacturer Number: 401-194Save $127.56
AIRAID QUICKFIT INTAKE SYSTEM -- Product legal for sale in California under Executive Order (EO) number D-609-7. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.; Provides additional power from 6 h.p. to 18 h.p.; Increases airflow between 20 percent and 200 percent; 99 percent filtration efficiency rate; Includes air filter, heat shield and all the parts necessary for easy installation; Without intake tube; Specifically designed to get more out of an engine using the vehicle's stock cold-air inlet and filter housing and augment it with a washable and reusable Airaid Synthamax air filter that is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Designed with a powdercoated heat shield setup for an aggressive improvement; Features an exclusive design that feeds air directly into the intake system and isolates hot air from the filter for a denser charge; Its bolt-on system mounts to the stock lower box using OE mounting clips and clamps for easy installation and eliminates the restrictive air box lid and paper filter; Made in USA.
- Series: Airaid QuickFit
- Type: Without tube, 50-state legal
- Quantity Sold: Assembly
- Warranty: Lifetime Airaid limited warranty
Fits the following 2004-2011 Ford Ranger submodels:
- 2006-2011: Sport; 6 Cyl 4.0L;
- 2005-2011: XL; 6 Cyl 4.0L;
2001-2003 Ford Ranger Cold Air Intake - AEM Air - AEM Air Brute Force, With tube, 50-state legal
Part Number: A18218109DC Manufacturer Number: 21-8109DCSave $86.23
AEM BRUTE FORCE AIR INDUCTION SYSTEM
AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.
Specifications
- Synthetic filter material
- Dry filter element
- With heat shield
- Silver tube finish
- T-6063 aluminum tube material
- Mandrel-bent tubing
- Washable and reusable air filter
- Manufactured and assembled in the U.S.A.
- Product legal for sale in California under Executive Order (EO) number D-392-27. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
- Series: AEM Air Brute Force
- Type: With tube, 50-state legal
- Quantity Sold: Assembly
- Warranty: Lifetime AEM limited warranty
Fits the following 2001-2003 Ford Ranger submodels:
- 2001-2003: Edge; 6 Cyl 4.0L;
- 2001-2003: XL; 6 Cyl 4.0L;
1998-2001 Ford Ranger Cold Air Intake - Volant - With tube, 49-state legal - no CA shipments
Part Number: V3129630 Manufacturer Number: 29630Save $47.28
VOLANT COLD AIR INTAKE KIT
Volant's cold air intake kit is engineered to increase horsepower and engine response. Ensures a less restrictive air passage through its large diameter air duct sculptured with smooth bends. Its awesome performance look lid contributes to the system's sleek style and its silicon connectors provide flexibility while maintaining strength and thermal stability.
Specifications
- Synthetic filter material
- Oiled filter element
- With heat shield
- Black tube finish
- Plastic tube material
- Washable and reusable air filter
- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
- Type: With tube, 49-state legal - no CA shipments
- Quantity Sold: Assembly
Fits the following 1998-2001 Ford Ranger submodels:
- 2001-2001: Edge; 6 Cyl 3.0L;
- 1998-2001: XL; 6 Cyl 3.0L;
| Showing items 1-5 out of 5 |
- $100 - $250 (10)
- $250 - $500 (21)
- Ford Bronco Cold Air Intake
- Ford Contour Cold Air Intake
- Ford Crown Victoria Cold Air Intake
- Ford E-350 Cold Air Intake
- Ford E-350 Club Wagon Cold Air Intake
- Ford E-350 Econoline Cold Air Intake
- Ford E-350 Econoline Club Wagon Cold Air Intake
- Ford E-350 Super Duty Cold Air Intake
- Ford E-450 Econoline Super Duty Cold Air Intake
- Ford E-450 Econoline Super Duty Stripped Cold Air Intake
- Ford E-450 Super Duty Cold Air Intake
- Ford E-550 Econoline Super Duty Cold Air Intake
- Ford E-550 Super Duty Cold Air Intake
- Ford Econoline Super Duty Cold Air Intake
- Ford Edge Cold Air Intake
- Ford Escape Cold Air Intake
- Ford Escort Cold Air Intake
- Ford Excursion Cold Air Intake







