Mitsubishi Lancer Cold Air Intake

K&N 69 SERIES TYPHOON HIGH FLOW PERFORMANCE SPORT COMPACT AIR INTAKE KITS

• Guaranteed to improve horsepower and acceleration in your sport compact
• Utilizes only the finest quality components
• Simple installation, typically in less than 90 minutes
• Available in high-quality finishes to fit your build
• Backed by the legendary K&N Million Mile Warranty
• Washable & reusable air filter lasts up to 100,000 miles before needing service
• Street legal in most states (some parts not approved for use in California - please check part details or call for more information)

Made for show and go, the K&N 69 Series Typhoon intake systems feature high-flow mandrel bent aluminum tubing engineered to fit most sport compact performance vehicles. Each kit is dyno-tested and proven to increase horsepower and torque. These high-performance air intakes rush fresh, cool air into your motor by replacing the OE air path with a high-flow aluminum tube. This rush of cool air immediately translates into more power from your engine!

All 69 Series Typhoon intake kits include an oversized & tapered high-flow air filter engineered to provide more surface area and capture more dust. The enlarged surface area flows more air volume to the motor and captures more dirt, extending the service life between cleanings (up to 100,000 miles).

Fits the following 2008-2012 Mitsubishi Lancer submodels:

• 2012-2012: GT Sportback; 4 Cyl 2.4L;
• 2012-2012: GT; 4 Cyl 2.4L;

• 2012-2012: SE; 4 Cyl 2.4L;

• 2010-2011: GTS Sportback; 4 Cyl 2.4L;

• 2009-2011: GTS; 4 Cyl 2.4L;

• 2009-2009: Evolution RS; 4 Cyl 2.0L;

• 2009-2009: Ralliart; 4 Cyl 2.0L;

• 2009-2009: SE; 4 Cyl 2.0L;

• 2008-2009: DE; 4 Cyl 2.0L;

• 2008-2009: ES; 4 Cyl 2.0L;

• 2008-2009: Evolution GSR; 4 Cyl 2.0L;

• 2008-2009: Evolution MR; 4 Cyl 2.0L;

• 2008-2008: GTS; 4 Cyl 2.0L;

Fits 11 more submodels. (Show all) Show less info

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Gray tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Fits the following 2008-2011 Mitsubishi Lancer submodels:

• 2011-2011: GT Sportback; 4 Cyl 2.0L; "Naturally Aspirated"
• 2011-2011: GT; 4 Cyl 2.0L; "Naturally Aspirated"

• 2011-2011: SE Sportback; 4 Cyl 2.0L; "Naturally Aspirated"

• 2009-2011: DE; 4 Cyl 2.0L; "Naturally Aspirated"

• 2009-2011: ES; 4 Cyl 2.0L; "Naturally Aspirated"

• 2009-2011: SE; 4 Cyl 2.0L; "Naturally Aspirated"

• 2008-2008: DE; All Engines;

• 2008-2008: ES; All Engines;

• 2008-2008: GTS; All Engines;

Fits 7 more submodels. (Show all) Show less info

INJEN SP COLD AIR INTAKE

Injen's SP cold air intake features patent pending Mega Ram technology that regulates the volume and velocity of the charged airflow by using variable and calibrated diameter aluminum tubes. It boosts optimal performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Polished tube finish
• 6061 T-6 aluminum tube material

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Fine-tuned for specific applications

Fits the following 2009-2009 Mitsubishi Lancer submodels:

• 2009-2009: GTS; 4 Cyl 2.4L;

Takeda Retain Cold Air Intake

Takeda Retain Cold Air Intake provides additional power gains of up to 14 h.p. and 14 lb. - ft. of torque, filtration efficiency of up to 99.4 percent, and flow rate of up to 416 CFM. Its intake tube features an anodized maintenance-free coat for added durability, while its air filter uses a revolutionary 2-layer synthetic dry media that does not require oil to filter out dirt. This performance short ram intake was developed in a state of the art factory by experienced airflow engineers using digital measuring, rapid prototyping and real world dyno testing for optimal performance, fit, and function.

Feature(s):

• Offers more air flow for increased horsepower, torque, and fuel economy
• Flow bench tested and computer modeled for maximum efficiency
• Cleans easily and quickly either by tapping, vacuuming, or washing

Note(s):

• CNC machined sensors require proper height and fitment to ensure that the vehicle does not get a check engine light
• 49-state legal; Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Fits the following 2009-2011 Mitsubishi Lancer submodels:

• 2009-2011: GTS; 4 Cyl 2.4L;