Sterling Cylinder Head Gasket Set

CYLINDER HEAD GASKET -- A high quality, OE replacement cylinder head gasket; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1989-1991 Sterling 827 submodels:

• 1990-1991: Si; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN G"
• 1990-1991: Si; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN H"

• 1990-1991: Si; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1989-1991: S; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN G"

• 1989-1991: S; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN H"

• 1989-1991: S; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1989-1991: SL; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN G"

• 1989-1991: SL; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN H"

• 1989-1991: SL; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1989-1991: SLi; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN G"

• 1989-1991: SLi; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN H"

• 1989-1991: SLi; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1989-1989: S; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN J"

• 1989-1989: SL; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN J"

• 1989-1989: SLi; 6 Cyl 2.7L; "GAS, FI, Naturally Aspirated, VIN J"

Fits 13 more submodels. (Show all) Show less info

FELPRO CYLINDER HEAD GASKET -- Made of high density material and superior design specifically for the aftermarket repair; Compresses enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; With 1-year Felpro limited warranty.

Fits the following 1987-1988 Sterling 825 submodels:

• 1987-1988: S; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN A"
• 1987-1988: S; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN B"

• 1987-1988: S; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN C"

• 1987-1988: S; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN D"

• 1987-1988: SL; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN A"

• 1987-1988: SL; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN B"

• 1987-1988: SL; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN C"

• 1987-1988: SL; 6 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN D"

Fits 6 more submodels. (Show all) Show less info

BECK-ARNLEY CYLINDER HEAD GASKET -- A High Quality, Direct-Fit OEM Replacement Cylinder Head Gasket

Fits the following 1989-1991 Sterling 827 submodels:

• 1990-1991: Si; 6 Cyl 2.7L;
• 1989-1991: S; 6 Cyl 2.7L;

• 1989-1991: SL; 6 Cyl 2.7L;

• 1989-1991: SLi; 6 Cyl 2.7L;

Fits 2 more submodels. (Show all) Show less info

VICTOR REINZ CYLINDER HEAD GASKET, SOLD INDIVIDUALLY -- Made from patented Nitroseal, a graphite facing material that is clinched to a perforated steel core; Offers superior heat resistance of up to 1800 degrees Fahrenheit while also maintaining excellent conformability; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1991 Sterling 827 submodels:

• 1990-1991: All Submodels; All Engines;

EBC GREENSTUFF 2000 SERIES BRAKE PADS, ORGANIC, 2-WHEEL SET

Designed especially for sport compacts, muscle cars, and premium American- and European-built sedans, the EBC Greenstuff 2000 line of brake pads is the perfect choice for high performance braking during spirited street driving. Made with organic man-made aramid fibers such as DuPont Kevlar or Twaron, Greenstuff 2000 boasts of a nominal friction coefficient of 0.55. Additionally, each pad has its surface finished with EBC Brake-In coating to guarantee you a high initial brake effect. With Greenstuff 2000, you are free to cruise leisurely along highways without worry.

Features:

• Emits less dust than equivalent semi-metallic pads
• Proven in tests to stop a vehicle 20 feet sooner than stock pads
• Reduces heat fade and rotor wear
• Fully shimmed, chamfered, and slotted for silent braking
• Features EBC Brake-In surface coating to accelerate pad bed in after installation
• Greenstuff pads are for spirited street driving

Install these brake pads with the help of EBC's instructional video P/N E35DVD083 (sold separately).

Fits the following 1989-1991 Sterling 827 submodels:

• 1990-1991: Si; 6 Cyl 2.7L;
• 1989-1991: S; 6 Cyl 2.7L;

• 1989-1991: SL; 6 Cyl 2.7L;

• 1989-1991: SLi; 6 Cyl 2.7L;

Fits 2 more submodels. (Show all) Show less info

CENTRIC C-TEK STANDARD SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Restore the performance of your braking system with Centric C-Tek Standard Brake Pads. These high quality OE replacements ensure safe and consistent stopping ability so that you can enjoy your daily drive without worry. Centric C-Tek Standard Brake Pads offer exceptional stopping power and are available for most import and domestic vehicles.

Features:

• 100% asbestos and copper free formulas
• Special semi-metallic friction compounds
• Shimmed to eliminate noise and vibration
• Formulated for reduced noise
• Offers excellent pad and rotor life with minimal brake dust

Item Details:

• Includes shims

Fits the following 1989-1991 Sterling 827 submodels:

• 1989-1991: All Submodels; All Engines;

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

Fits the following 1989-1991 Sterling 827 submodels:

• 1990-1991: Si; 6 Cyl 2.7L;
• 1989-1991: S; 6 Cyl 2.7L;

• 1989-1991: SL; 6 Cyl 2.7L;

• 1989-1991: SLi; 6 Cyl 2.7L;

Fits 2 more submodels. (Show all) Show less info

BOSAL EXHAUST GASKET, SOLD INDIVIDUALLY -- Between catalytic converter and stock manifold; A high quality, direct fit OE replacement exhaust gasket; Designed for a leak free connection; With application between Bosal catalytic converter part number 099-053 and stock manifold; Will fit other exhaust part applications similar to OE structure and design.

Fits the following 1990-1990 Sterling 827 submodels:

• 1990-1990: S; 6 Cyl 2.7L; "VIN K"
• 1990-1990: SL; 6 Cyl 2.7L; "VIN K"

• 1990-1990: SLi; 6 Cyl 2.7L; "VIN K"

• 1990-1990: Si; 6 Cyl 2.7L; "VIN K"

Fits 2 more submodels. (Show all) Show less info