Audi 5000 Engine Gasket Set

Victor Reinz
Victor Reinz is a leading OE manufacturer of gaskets and sealing systems.

Fits the following 1978-1988 Audi 5000 submodels:

• 1978-1988: All Submodels; All Engines;
• 1984-1984: Base; All Engines;

• 1984-1984: S Turbo; All Engines;

Fits 1 more submodels. (Show all) Show less info

EBC ULTIMAX BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Replace your worn out brake pads with new EBC Ultimax Brake Pads. Manufactured according to OE specifications, these long lasting pads completely eliminate brake judder and reduce brake disc wear by up to 50 percent. It's common practice to replace stock discs when replacing pads, but with Ultimax, your discs can last two pad sets. This means that with EBC Ultimax Brake Pads, you get to enjoy big savings and high performance braking over a good period of time.

Features:

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

Install these brake pads with the help of EBC's Instructional Video P/N E35DVD083 (sold separately).

Fits the following 1981-1988 Audi 5000 submodels:

• 1988-1988: CS; 5 Cyl 2.2L;
• 1987-1988: S; 5 Cyl 2.3L;

• 1986-1987: CS; 5 Cyl 2.2L; "Turbocharged"

• 1981-1987: S; 5 Cyl 2.2L; "Naturally Aspirated"

• 1985-1985: S Turbo; 5 Cyl 2.2L;

• 1985-1985: S; 5 Cyl 2.2L;

• 1984-1984: S Turbo; 5 Cyl 2.2L; "Turbocharged"

• 1981-1983: Base; 5 Cyl 2.2L; "Naturally Aspirated"

• 1981-1983: Turbo; 5 Cyl 2.2L; "Turbocharged"

Fits 7 more submodels. (Show all) Show less info

CENTRIC POSI QUIET SEMI-METALLIC BRAKE PADS, 2-WHEEL SET

Centric Posi Quiet Semi-Metallic Brake Pads are 100 percent asbestos-free and are made using the same positive molding process utilized by OE manufacturers, assuring consistent friction material density throughout the pad resulting in even wear and performance. These feature either precision cut or shaved backing plates, and mechanically attached shims to ensure proper fitting in the caliper, virtually eliminating noise associated with pad vibration. A special scorching process forces any impurities out of the friction material and accelerates the break-in process. This promotes earlier and more complete bed-in of the pads, thereby increasing their effective stopping power from the very first stop.

Features:

• 100% asbestos and copper free formulas
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Item Details:

• Includes shims

Fits the following 1980-1988 Audi 5000 submodels:

• 1986-1988: CS; All Engines;
• 1984-1985: S Turbo; All Engines;

• 1982-1983: Base; All Engines;

• 1981-1983: Turbo; All Engines;

• 1980-1980: S; All Engines;

Fits 3 more submodels. (Show all) Show less info

Akebono EURO Ultra-Premium Brake Pads

EURO Ultra-Premium brake pads provide the ideal vehicle control and response performance intended by the manufacturers of European makes.

The Akebono EURO Ultra-Premium brake pad line addresses performance specific requirements of European makes, providing vehicle control and response as the vehicle manufacturer had intended. These brake pads are formulated and fit with a precision that is remarkable sensitive to every application. This provides superb function and rotor compatibility, resulting in longer rotor life.

The use of highly advanced ceramic brake pad technology allows Akebono’s “EURO” pad line to provide excellent stopping power while extending rotor life and virtually eliminating brake dust.

• Increased stopping power in critical braking situations
• Improved pad wear performance over conventional disc pads
• Reduced rotor wear by as much as 80 percent
• Unrivaled in initial effectiveness with no break-in required
• Ultra-quiet, positive, smooth braking performance
• High resistance to fade with fast recovery
• More consistent pedal feel
• Rotor-friendly pad formulations
• Enhanced durability and life
• Low dusting and precision fit

Akebono’s Aftermarket disc pads contain the same materials, engineering, quality standards, and advanced technologies used to create their OE ceramic brake pads.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

EURO Ceramic w/ Shims

Fits the following 1980-1988 Audi 5000 submodels:

• 1987-1988: S; 5 Cyl 2.3L;
• 1986-1988: CS; 5 Cyl 2.2L;

• 1985-1987: S; 5 Cyl 2.2L;

• 1985-1985: Base; 5 Cyl 2.0L;

• 1985-1985: S Turbo; 5 Cyl 2.2L;

• 1984-1984: Base; All Engines;

• 1984-1984: S Turbo; All Engines;

• 1980-1983: All Submodels; All Engines;

Fits 6 more submodels. (Show all) Show less info

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Specifications:

• 0.6 in. thickness

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

Fits the following 1980-1985 Audi 5000 submodels:

• 1984-1985: S Turbo; 5 Cyl 2.2L;
• 1982-1985: S; 5 Cyl 2.2L;

• 1982-1983: Base; 5 Cyl 2.0L;

• 1982-1983: Base; 5 Cyl 2.2L;

• 1982-1983: Turbo; 5 Cyl 2.2L;

• 1981-1981: Base; All Engines;

• 1981-1981: S; All Engines;

• 1980-1980: All Submodels; All Engines;

Fits 6 more submodels. (Show all) Show less info

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

Fits the following 1978-1980 Audi 5000 submodels:

• 1979-1980: Base; 5 Cyl 2.0L; "DIESEL"
• 1979-1980: S; 5 Cyl 2.0L; "DIESEL"

• 1979-1980: S; 5 Cyl 2.2L;

• 1978-1980: Base; 5 Cyl 2.2L;

Fits 2 more submodels. (Show all) Show less info

BECK ARNLEY PREMIUM BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Restore the performance of your braking system with Beck Arnley Premium Brake Pads. These long lasting brake pads are made to be of exact fit and ready to install right out of the box. More than this, these pads are post-cured so that you don't need to have them broken in any more.

Features:

• Chamfered and/or slotted depending on OE design
• Formulated from premium non-asbestos semi-metallic friction materials that withstand high heat
• Post-cured so there is no break-in required
• Pad assemblies are integrally molded and feature smooth-edged backing plates
• Precision-fit construction virtually eliminates noise and reduces dust output
• With chemically and mechanically bonded shims

Fits the following 1980-1988 Audi 5000 submodels:

• 1980-1988: All Submodels; All Engines;
• 1984-1984: Base; 5 Cyl 2.0L;

• 1984-1984: S Turbo; 5 Cyl 2.2L;

• 1984-1984: S; 5 Cyl 2.2L;

Fits 2 more submodels. (Show all) Show less info

FELPRO VALVE COVER GASKET SET -- Includes semi-circular plugs; Designed to be high quality direct fit replacements for stock valve cover gaskets; With 1-year Felpro limited warranty.

Fits the following 1980-1988 Audi 5000 submodels:

• 1987-1988: S; 5 Cyl 2.3L; "GAS, FI, NF, Naturally Aspirated, VIN B"
• 1987-1988: S; 5 Cyl 2.3L; "GAS, FI, NF, Naturally Aspirated, VIN C"

• 1986-1988: CS; 5 Cyl 2.2L; "GAS, FI, MC, Turbocharged, VIN D"

• 1987-1987: CS; 5 Cyl 2.2L; "GAS, FI, MC, Turbocharged, VIN E"

• 1985-1987: S; 5 Cyl 2.2L; "GAS, FI, KZ, Naturally Aspirated, VIN B"

• 1984-1985: S Turbo; 5 Cyl 2.2L; "GAS, FI, KH, Turbocharged, VIN C"

• 1984-1984: S; 5 Cyl 2.2L; "GAS, FI, WU, Naturally Aspirated, VIN A"

• 1984-1984: S; 5 Cyl 2.2L; "GAS, FI, WU, Naturally Aspirated, VIN B"

• 1981-1983: Base; 5 Cyl 2.2L; "GAS, FI, WD, Naturally Aspirated, VIN B"

• 1981-1983: Base; 5 Cyl 2.2L; "GAS, FI, WE, Naturally Aspirated, VIN B"

• 1981-1983: S; 5 Cyl 2.2L; "GAS, FI, WD, Naturally Aspirated, VIN B"

• 1981-1983: S; 5 Cyl 2.2L; "GAS, FI, WE, Naturally Aspirated, VIN B"

• 1981-1983: Turbo; 5 Cyl 2.2L; "GAS, FI, WK, Turbocharged, VIN C"

• 1980-1980: Base; 5 Cyl 2.2L; "GAS, FI, WD, Naturally Aspirated"

• 1980-1980: Base; 5 Cyl 2.2L; "GAS, FI, WE, Naturally Aspirated"

• 1980-1980: S; 5 Cyl 2.2L; "GAS, FI, WD, Naturally Aspirated"

• 1980-1980: S; 5 Cyl 2.2L; "GAS, FI, WE, Naturally Aspirated"

• 1980-1980: S; 5 Cyl 2.2L; "GAS, FI, WK, Turbocharged"

Fits 16 more submodels. (Show all) Show less info

BOSCH QUIETCAST PREMIUM BRAKE PADS, 2-WHEEL SET

Replace worn-down OE brake pads with Bosch QuietCast Premium Brake Pads. These have the same material type as your original pads, but boast of advanced platform-specific formulation to ensure top braking performance. They are also sculpted to match the chamfers and slots of the OE design, if any. Additionally, these feature rubber-core shims that are heat and pressure cured between two layers of steel to ensure excellent rubber-to-metal bonding that results in noise reduction, increased strength, and corrosion resistance. With Bosch QuietCast, you are assured of reliable braking performance that is pleasantly noise-free.

Features:

• Integrally molded Unimold design
• Laminated OE-style rubber-core shims
• Same-as-OE brake pad material type
• Advanced platform-specific pad material formulation
• Powdercoated backing plate
• Synthetic lubricant included

Fits the following 1980-1988 Audi 5000 submodels:

• 1980-1988: All Submodels; All Engines;

BOSAL EXHAUST GASKET -- Before catalytic converter; A high quality, direct fit OE replacement exhaust gasket; Designed for a leak free connection; With application before Bosal catalytic converter part number 099-0571 or 099-0581; Will fit other exhaust part applications similar to OE structure and design.

Fits the following 1982-1983 Audi 5000 submodels:

• 1982-1983: Base; 5 Cyl 2.0L;

GASKET -- Stock Replacement, Original Equipment Quality, Sold Individually

Fits the following 1985-1988 Audi 5000 submodels:

• 1987-1988: S; 5 Cyl 2.3L; "GAS, FI, NF, Naturally Aspirated, VIN B"
• 1987-1988: S; 5 Cyl 2.3L; "GAS, FI, NF, Naturally Aspirated, VIN C"

• 1985-1987: S; 5 Cyl 2.2L; "GAS, FI, KZ, Naturally Aspirated, VIN B"

Fits 1 more submodels. (Show all) Show less info

Goetze
Goetze an original equipment manufacturer and supplier of metal engine components, gaskets, piston rings and as well as a broad range of sealing solutions.

Set per Cylinder

Fits the following 1987-1988 Audi 5000 submodels:

• 1987-1988: All Submodels; All Engines;

Elring-Klinger
Elring-Klinger is a global development partner and Original Equipment supplier of high-performance cylinder-head and specialty gaskets.

Fits the following 1978-1985 Audi 5000 submodels:

• 1984-1985: S Turbo; All Engines;
• 1984-1984: Base; All Engines;

• 1978-1983: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info

4-SEASONS COMPRESSOR MANIFOLD PORT GASKET, SOLD INDIVIDUALLY -- Suction and discharge flange gaskets, York and Tech compressor; A high quality, OE replacement compressor manifold port gasket.

Fits the following 1978-1988 Audi 5000 submodels:

• 1986-1988: CS; All Engines;
• 1979-1988: S; All Engines;

• 1984-1985: S Turbo; All Engines;

• 1978-1985: Base; All Engines;

• 1981-1983: Turbo; All Engines;

Fits 3 more submodels. (Show all) Show less info

Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.

Fits the following 1978-1988 Audi 5000 submodels:

• 1978-1988: All Submodels; All Engines;
• 1984-1984: Base; All Engines;

• 1984-1984: S Turbo; All Engines;

Fits 1 more submodels. (Show all) Show less info