Jeep 6-230 Engine Gasket Set

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers 808, 884, and 721
• Head cast number 717
• Rockers on shaft

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1964-1965 Jeep 6-230 submodels:

• 1964-1965: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated"

STANT ENGINE COOLANT THERMOSTAT HOUSING GASKET -- A high quality, direct fit OE replacement thermostat housing gasket; With 90-day Stant limited warranty.

Fits the following 1962-1965 Jeep 6-230 submodels:

• 1962-1965: Base; 6 Cyl 3.8L; "GAS"

GATES THERMOSTAT GASKETS, SET OF 10 -- A high quality, direct fit OE replacement thermostat gasket set.

Fits the following 1963-1965 Jeep 6-230 submodels:

• 1963-1965: Base; 6 Cyl 3.8L; "GAS"

FELPRO FUEL PUMP GASKET -- A high quality, OE replacement fuel pump gasket; For mechanical fuel pump.

Fits the following 1962-1965 Jeep 6-230 submodels:

• 1964-1965: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated"
• 1962-1965: Base; 6 Cyl 3.8L; "GAS, CARB, AD, Naturally Aspirated"

• 1962-1965: Base; 6 Cyl 3.8L; "GAS, CARB, ND, Naturally Aspirated"

• 1962-1965: Base; 6 Cyl 3.8L; "GAS, CARB, TD, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

DORMAN OIL DRAIN PLUG GASKET, COPPER -- M22, 0.88 in. size, 0.05 in. thickness, 0.88 in. ID, 1.05 in. OD; A high quality, direct fit OE replacement oil drain plug gasket; Replaces OE numbers 095005, 65276, 806515, and 811688600; With lifetime Dorman limited warranty.

Fits the following 1963-1965 Jeep 6-230 submodels:

• 1963-1965: Base; 6 Cyl 3.8L; "GAS, CARB, AD, Naturally Aspirated"
• 1963-1965: Base; 6 Cyl 3.8L; "GAS, CARB, ND, Naturally Aspirated"

• 1963-1965: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated"

• 1963-1965: Base; 6 Cyl 3.8L; "GAS, CARB, TD, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

OMIX TRANSFER CASE GASKET -- A high quality, OE replacement transfer case gasket; With Omix limited warranty.

Fits the following 1963-1965 Jeep 6-230 submodels:

• 1963-1965: All Submodels; All Engines;

MR GASKET OIL FILTER BY-PASS ADAPTER -- For Ford/Mopar/Imports 1957 and later; 0.75-16 in. thread size; 2.5 in ID x 2.75 in. OD O-ring; A precision die cast aluminum oil filter by-pass adapter used to relocate your oil filter; Replacement part for remote oil filter system; With Mr Gasket's limited 90-day warranty.

Fits the following 1963-1965 Jeep 6-230 submodels:

• 1963-1965: All Submodels; All Engines;