Mitsubishi Starion Engine Gasket Set

CYLINDER HEAD GASKET SET, RUBBER -- Includes molded rubber valve cover gaskets and premium valve stem seals; Does not include head bolts; A high quality, OE replacement cylinder head gasket set; Head bolt replacement recommended; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1988-1989 Mitsubishi Starion submodels:

• 1988-1989: ESi-R; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"
• 1988-1988: ESi; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

FELPRO PERMATORQUE HEAD GASKET SET, RUBBER -- Includes PermaDry molded rubber valve cover gasket and premium valve stem seals; Does not include head bolts; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 1988-1989 Mitsubishi Starion submodels:

• 1988-1989: ESi-R; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"
• 1988-1988: ESi; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With 1-year Felpro limited warranty.

Fits the following 1983-1989 Mitsubishi Starion submodels:

• 1986-1989: ESi-R; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"
• 1985-1988: ESi; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

• 1984-1987: LE; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1985-1985: LE; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

• 1984-1985: ES; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1984-1985: LS; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1983-1983: Base; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN 7"

• 1983-1983: LS; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN 7"

Fits 6 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET, RUBBER -- Includes PermaDry molded rubber valve cover gasket and premium valve stem seals; Does not include head bolts; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Use with bolt prep Gra2 and installation aid Red3, Blu4 and Yel5; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 1983-1987 Mitsubishi Starion submodels:

• 1986-1987: ESi-R; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"
• 1984-1987: LE; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1985-1985: ESi; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

• 1985-1985: LE; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN N"

• 1984-1985: ES; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1984-1985: LS; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN H"

• 1983-1983: Base; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN 7"

• 1983-1983: LS; 4 Cyl 2.6L; "GAS, FI, Turbocharged, VIN 7"

Fits 6 more submodels. (Show all) Show less info