BMW Engine Long Block

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2001-2003 BMW 540i submodels:

• 2001-2003: Base; 8 Cyl 4.4L;

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1984-1987 BMW 528e submodels:

• 1984-1987: All Submodels; All Engines;

FELPRO HEAD GASKET SET -- Includes premium valve stem seals; Does not include head bolts; Compresses enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 1984-1985 BMW 318i submodels:

• 1984-1985: Base; 4 Cyl 1.8L; "GAS, FI, M10, Naturally Aspirated"

Victor Reinz
Victor Reinz is a leading OE manufacturer of gaskets and sealing systems.

Fits the following 2000-2000 BMW 328Ci submodels:

• 2000-2000: All Submodels; All Engines;

BECK ARNLEY ENGINE CYLINDER HEAD GASKET SET -- A high quality, direct fit OE replacement engine cylinder head gasket set; With 90-day or 4,000-mile Beck Arnley warranty.

Fits the following 1992-1994 BMW 325i submodels:

• 1992-1994: Base; 6 Cyl 2.5L;

STANDARD T-SERIES/TRU-TECH TEMPERATURE SENSOR -- Blade terminal type; The temperature sensor design specifies tight tolerance thermistor response values to assure accuracy of the temperature measurement and proper part operation; 100 percent factory tested to ensure trouble-free performance; A high quality, direct fit OE replacement temperature sensor.

Fits the following 1995-1999 BMW 318ti submodels:

• 1995-1999: All Submodels; All Engines;

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1991 BMW 325is submodels:

• 1990-1991: All Submodels; All Engines;

Programa
Programa Inc. is an industry leader in the repairing and remanufacturing of automotive electronic control modules and devices for European vehicles.

Rebuilt

Fits the following 1989-1990 BMW 525i submodels:

• 1989-1990: All Submodels; All Engines;

Huco Electronic GmbH
HUCO Electronic GmbH is one of the largest global manufacturers of high-quality electronic replacement parts.

Fits the following 1984-1985 BMW 318i submodels:

• 1984-1985: All Submodels; All Engines;

Fits the following 2003-2003 BMW Z8 submodels:

• 2003-2003: Alpina; All Engines;

Fits the following 2001-2001 BMW M3 submodels:

• 2001-2001: All Submodels; All Engines;

Fits the following 1988-1988 BMW 535is submodels:

• 1988-1988: All Submodels; All Engines;

COVERCRAFT BLOCK-IT EVOLUTION/TECHNALON SERIES READY-FIT CAR COVER, POLYPROPYLENE, TAN

Covercraft Block-It car covers provide good, basic protection to your vehicle's finish.

Features:

• Made of 4-layer non-woven polypropylene fabric that provides maximum protection in all weather conditions
• Designed with two middle layers of melt-blown fabric that act as filtration barrier against most airborne pollutants
• Has better impact absorption to help protect your vehicle's finish from nicks, dings, dents, and scratches
• Naturally moisture resistant and is breathable to allow air to circulate through the fabric and to dry easily

Fits the following 2008-2012 BMW M3 submodels:

• 2012-2012: All Submodels; All Engines;
• 2008-2011: Base; All Engines;

DENSO PREMIUM CLASS EXTRA LONG LIFE IRIDIUM SPARK PLUG

Denso's Premium Class Extra Long Life Iridium Spark Plugs is fast becoming the standard for today's high-tech engines. Employing a revolutionary 360 degrees laser welding process, Denso has created a spark plug unlike anything on the market today. Designed for durability under the most extreme conditions. Denso's patented Iridium alloy is 6 times harder and 8 times stronger than conventional platinum and can handle temperatures in excess of 4,000 degrees Fahrenheit.

Specification:

• 12 mm thread size
• 26.5 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Gasket seat style
• Resistor plug type
• 0.5 mm fine wire iridium center electrode
• 0.7 mm platinum needle tipped ground electrode
• Solid terminal end
• Dual needle design
• Heat range 22

Features:

• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements

Fits the following 2008-2011 BMW X6 submodels:

• 2011-2011: M; 8 Cyl 4.4L; "GAS, FI, S63B44A, Turbocharged"
• 2010-2011: ActiveHybrid; 8 Cyl 4.4L; "ELECTRIC/GAS, FI, N63B44, Turbocharged"

• 2008-2011: xDrive50i; 8 Cyl 4.4L; "GAS, FI, N63B44, Turbocharged"

Fits 1 more submodels. (Show all) Show less info