Chevy Laguna Engine Long Block

CYLINDER HEAD GASKET SET -- Does not include head bolts; A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1976-1976: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN V"
• 1975-1976: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1975-1975: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1974-1975: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1973-1975: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1973-1974: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1973-1973: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1973-1973: Estate; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1973-1973: Estate; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1973-1973: Estate; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN K"

Fits 8 more submodels. (Show all) Show less info

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Does not include head bolts and 2-17/32 in. ID exhaust pipe packing; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1976-1976: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN V"
• 1975-1976: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1975-1975: S3; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1974-1975: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1973-1975: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1973-1974: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN K"

• 1973-1973: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1973-1973: Estate; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1973-1973: Estate; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1973-1973: Estate; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN K"

Fits 8 more submodels. (Show all) Show less info

MR GASKET ENGINE REBUILDER ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; With Mr. Gasket's limited 90-day warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1975-1975: Base; 8 Cyl 5.7L;

• 1974-1974: Base; 8 Cyl 5.7L; "VIN L"

• 1973-1974: Base; 8 Cyl 5.7L; "VIN H"

• 1973-1973: Estate; 8 Cyl 5.7L; "VIN H"

Fits 3 more submodels. (Show all) Show less info

SPECTRE ENGINE DRESS-UP KIT, CHROME -- Includes one pair of tall baffled valve covers and valve cover gaskets, eight spreader bars and T-bar hold downs, one breather, one dipstick and tube, two grommets, timing cover kit, and timing tab.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1976-1976: All Submodels; All Engines;
• 1975-1975: Base; 8 Cyl 5.7L;

• 1975-1975: S3; 8 Cyl 5.7L;

• 1975-1975: S3; 8 Cyl 6.6L;

• 1974-1975: Base; 8 Cyl 6.6L;

• 1974-1974: Base; 8 Cyl 5.7L; "VIN L"

• 1973-1974: Base; 8 Cyl 5.7L; "VIN H"

• 1973-1973: Estate; 8 Cyl 5.7L; "VIN H"

Fits 6 more submodels. (Show all) Show less info

TEMPERATURE SENSOR -- Male connector, 1 terminal, male terminal, slide terminal type, 1/2 in. -18 NPT thread size; A high quality, direct fit OE replacement temperature sensor; With 3-year or 36,000-mile Standard limited warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1973-1976: All Submodels; All Engines;

EDELBROCK POWER PACKAGE TOP END KITS -- Includes Performer RPM hydraulic cams and lifters, 2 performer RPM heads, Timing cover and seal set, cylinder head gasket and seal set, RPM Air-gap intake manifold, intake manifold kit, and cylinder head bolt set; With Edelbrock's limited 1-year warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1976-1976: All Submodels; All Engines;
• 1975-1975: S3; 8 Cyl 5.7L;

• 1975-1975: S3; 8 Cyl 6.6L;

• 1974-1975: Base; 8 Cyl 6.6L;

• 1973-1975: Base; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 5.7L;

Fits 4 more submodels. (Show all) Show less info

RACING POWER CHEVROLET BILLET-STYLE CAST ALUMINUM DIPSTICK -- Includes O ring and seal; Made of heavy-duty billet-style cast aluminum, high-speed polished to a brilliant luster; Features ball-mill design-a definite difference from the all-chrome crowd; Has billet aluminum handle; Replaces original dipstick perfectly.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1973-1975: Base; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1975-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1975-1975: Base; 8 Cyl 5.7L;

TRANS-DAPT TRI-STEP OIL FILLER TUBE, CHROME -- Fits Both OEM And Aftermarket 1-1/4, 1-5/16, 1-1/2 Manifolds, Push In Oil Breather # 4802 Should Be Used

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1974-1976: All Submodels; All Engines;
• 1973-1973: Base; 8 Cyl 5.7L;

• 1973-1973: Base; 8 Cyl 7.4L;

• 1973-1973: Estate; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 7.4L;

Fits 3 more submodels. (Show all) Show less info

BLUE PRINT ENGINE ASSEMBLY, BASE, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 1.51 diameter valve springs with damper
• 2.25 in. swirl polished intake valves
• 1.88 in. swirl polished exhaust valves
• 550 ft./lbs. of torque
• 9.0:1 compression ratio
• Dyno tested to produce 480 h.p.
• 4 bolt main block 0.06 in. over block
• Driver side dipstick
• Square and parallel decked
• 2-piece rear seal
• Align honed main bearing bore
• Elgin hardened push rods and long slot rockers with positive lock adjusting nuts
• Hardened retainers and keepers
• Flat tappet hydraulic lifter
• Cast iron oval port heads with screw-in studs, guide plates, and 113 cc chambers
• Includes Edelbrock performer RPM air gap intake manifold, chrome valve covers, Milo don cad plated oil pan, brass freeze plugs, and Professional Products harmonic balancer

Features:

• 110 degree lobe separation
• Duration at 0.05 in. lift is 230 intake/236 exhaust and maximum lift of 0.55 in. intake/0.56 in. exhaust
• Ignition timing: 13 to 16 degree initial/34 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat cast steel crankshaft internally balanced, 4.250 stroke, new Scat 4340 forged connecting rods, 150,000 psi TS rod bolts, Keith Black forged flat top pistons with Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1976-1976: S3; 8 Cyl 5.0L; "GAS, Naturally Aspirated"
• 1975-1975: S3; 8 Cyl 5.7L; "GAS, Naturally Aspirated"

• 1973-1975: Base; 8 Cyl 5.7L; "GAS, Naturally Aspirated"

• 1973-1973: Estate; 8 Cyl 5.7L; "GAS, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

DNJ ENGINE CYLINDER HEAD GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1973-1975: Base; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

AIRTEX FUEL PUMP, NEW -- Mechanical; Precision built to meet or exceed OE specifications; Its construction features the latest in technology and OE design philosophy.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1973-1975: Base; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

BOSCH FUEL PUMP, NEW -- Mechanical; Includes illustrated step-by-step instructions for safe and easy installation; Uses premium carbon brushes and advanced materials for longer and reliable service life; Has precision spin-balanced and polymer-encased armature for reduced noise and vibration; Nearly identical in dimension and appearance to OE parts; Application specific.

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: S3; 8 Cyl 5.7L;
• 1973-1975: Base; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

AC DELCO FUEL PUMP, NEW -- Mechanical; Engineered to provide outstanding fuel-delivery, quick engine starts, and continuous fuel supply; Manufactured in ISO-9001 and QS-9000 registered facilities for product's reliability; Replaces OE number 6471180.

Fits the following 1973-1974 Chevrolet Laguna submodels:

• 1973-1974: Base; 8 Cyl 5.7L;
• 1973-1973: Estate; 8 Cyl 5.7L;

COVERCRAFT MULTIBOND/BLOCK-IT 200 SERIES READY-FIT CAR COVER, POLYPROPYLENE, GRAY

Covercraft Block-It car covers provide good, basic protection to your vehicle's finish.

Features:

• Made of 3-layer polypropylene fabric that is naturally moisture resistant and treated for extra UV protection
• Breathable to allow moisture and condensation to evaporate and has good heat insulation
• Provides good protection from dust, tree sap, and bird droppings
• Resists rot and mildew
• Has soft touch and will not scratch clean paint or clear-coat
• Easy to use and less bulky for compact storage
• Recommends car cover lock
• Made in the USA

Fits the following 1973-1976 Chevrolet Laguna submodels:

• 1975-1976: All Submodels; All Engines;
• 1974-1974: Base; All Engines;

• 1974-1974: Type S-3; All Engines;

• 1973-1973: Base; 8 Cyl 5.7L;

• 1973-1973: Base; 8 Cyl 7.4L;

• 1973-1973: Estate; 8 Cyl 5.7L;

• 1973-1973: Estate; 8 Cyl 7.4L;

Fits 5 more submodels. (Show all) Show less info