Ford Engine Long Block

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers 86TM and 87TM
• 0.32 in. accessory mount holes

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1986-1990 Ford Ranger submodels:

• 1990-1990: S Plus; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"
• 1987-1990: Custom; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: S; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: STX; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: XLT; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1989-1989: GT; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1986: Base; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1986: XL; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

Fits 6 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers C1AE, C2AE, C3AE, C4AE, C5AE, and C6AE
• 8-bolt exhaust

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1958-1966 Ford Fairlane submodels:

• 1966-1966: 500XL; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated"
• 1958-1966: 500; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated"

• 1960-1963: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated, VIN X"

• 1959-1963: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated"

• 1960-1961: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated, VIN R"

• 1959-1961: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1960-1960: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated, VIN Y"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• 6-bolt bell housing

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1968-1968 Ford Torino submodels:

• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN A"
• 1968-1968: Base; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1968-1968: GT; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1968-1968: GT; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN C"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast number C8DE-B
• Head cast numbers C6DE, C8DE, and C9DE
• 1.5 in. carburetor mount

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1969-1969 Ford Maverick submodels:

• 1969-1969: Base; 6 Cyl 3.3L; "GAS, CARB, Naturally Aspirated, VIN T"

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers C8AE and D3TE
• Head cast numbers C8TE, C8AE, and D2TE
• 1.38 in. crank snout outside diameter
• 8-bolt exhaust

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1975-1976 Ford F-350 submodels:

• 1976-1976: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"
• 1975-1976: Custom; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Northland; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Ranger XLT; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Ranger; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

Fits 3 more submodels. (Show all) Show less info