Ford F-350 Engine Long Block

MARSHALL ENGINES DIESEL LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Diesel Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Quality parts and state-of-the-art machine work by dedicated professionals results in a line of remanufactured diesel engines that provide years of service. Dressed with pan and timing cover that add level of completion to ensure error free installation. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 10-bolt intake cover
• Powerstroke direct injection

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with factory installed oil pump, screen, oil pan, timing cover, valve covers, and oil cooler
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with valve cover gaskets and doesn't contain any fuel or ignition components.

Fits the following 1996-1997 Ford F-350 submodels:

• 1997-1997: Base; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"
• 1997-1997: Lariat; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

• 1996-1997: XL; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

• 1996-1997: XLT; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

• 1996-1996: Eddie Bauer; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

• 1996-1996: Special; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

Fits 4 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers C8AE and D3TE
• Head cast numbers C8TE, C8AE, and D2TE
• 1.38 in. crank snout outside diameter
• 8-bolt exhaust

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1975-1976 Ford F-350 submodels:

• 1976-1976: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"
• 1975-1976: Custom; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Northland; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Ranger XLT; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

• 1975-1976: Ranger; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated, VIN Y"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• Crank cast numbers 2MAD, 2MA, and 2M
• Flat tappet
• Dipstick hole in left rear of block

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and emission holes in rear of heads
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1977-1980 Ford F-350 submodels:

• 1980-1980: Custom; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"
• 1980-1980: Ranger Lariat; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1980-1980: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1980-1980: Ranger; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1978-1979: Ranger Lariat; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1979: Custom; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1979: Ranger XLT; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1979: Ranger; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1978: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1978: Northland; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

• 1977-1977: XLT; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN G"

Fits 9 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1993-1997 Ford F-350 submodels:

• 1997-1997: Base; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"
• 1997-1997: Lariat; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1993-1997: XL; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1993-1997: XLT; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1995-1996: Eddie Bauer; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1995-1996: Special; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

Fits 4 more submodels. (Show all) Show less info