GMC Engine Long Block

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• Rear wheel drive
• Flat tappet
• 14-bolt oil pan

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and emissions equipment
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with valley pan gasket.

Fits the following 1979-1984 GMC Caballero submodels:

• 1981-1984: Amarillo; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"
• 1979-1984: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1984: Diablo; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1981-1981: Conquista; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1981-1981: Royal Knight; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1980: Laredo; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1979: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

• 1979-1979: Diablo; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

• 1979-1979: Laredo; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 2-bolt main

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and remanufactured heads
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1996-2002 GMC Savana 3500 submodels:

• 2001-2002: SLT; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"
• 1996-2002: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"

• 1996-2000: SLE; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• Front wheel drive

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1998-1998 GMC Sonoma submodels:

• 1998-1998: SL; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"
• 1998-1998: SLE; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"

• 1998-1998: SLS; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 4-bolt main
• Valve cover bolts around the perimeter

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1987-1988 GMC V3500 submodels:

• 1987-1988: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN M"
• 1987-1988: High Sierra; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN M"

• 1987-1988: Sierra Classic; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN M"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 2-bolt main
• 0.63 in. oil pick-up tube
• Valve covers bolt down the center

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1992-1995 GMC Yukon submodels:

• 1995-1995: SLT; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"
• 1992-1995: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1992-1995: SLE; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1992-1994: Sport; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1993-1993: GT; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 3 more submodels. (Show all) Show less info