Mitsubishi Engine Long Block

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• DOHC
• 16-valve
• Block cast number 642
• Head cast number 867

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, inner timing cover, and water pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1995-1999 Mitsubishi Eclipse submodels:

• 1996-1999: GS; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"
• 1996-1999: RS; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"

• 1996-1997: Base; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"

• 1995-1995: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1995-1995: RS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• SOHC
• Rear wheel drive
• Block cast number 6G72

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1990-1994 Mitsubishi Mighty Max submodels:

• 1993-1994: Base; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN H"
• 1990-1992: Base; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1990-1991: 1 Ton; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN S"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Plus Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Quality parts and state-of-the-art machine work by dedicated professionals results in a line of remanufactured diesel engines that provide years of service. Dressed with pan and timing cover that add level of completion to ensure error free installation. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• SOHC
• 24-valve
• Block cast number 6G74
• Oil filter mounts to front of oil pump on passenger side

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with factory installed oil pan, timing cover, oil pump, pick-up tube, screen, and gasket set
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 2000-2002 Mitsubishi Montero submodels:

• 2001-2002: Limited; 6 Cyl 3.5L; "GAS, FI, 6G74, Naturally Aspirated, VIN R"
• 2001-2002: XLS; 6 Cyl 3.5L; "GAS, FI, 6G74, Naturally Aspirated, VIN R"

• 2000-2000: Base; 6 Cyl 3.5L; "GAS, FI, 6G74, Naturally Aspirated, VIN R"

Fits 1 more submodels. (Show all) Show less info