Buick Riviera Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Round exhaust ports
• Roller tappet

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and detonation sensor
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with valley pan gasket.

Fits the following 1985-1985 Buick Riviera submodels:

• 1985-1985: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN Y"
• 1985-1985: Luxury; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN Y"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1980-1981 Buick Riviera submodels:

• 1981-1981: Base; 6 Cyl 4.1L;
• 1981-1981: T-Type; 6 Cyl 3.8L;

• 1981-1981: T-Type; 6 Cyl 4.1L;

• 1980-1981: Base; 6 Cyl 3.8L;

• 1980-1980: S; 6 Cyl 3.8L;

Fits 3 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET, MULTI-LAYERED STEEL -- Second design; A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1995-1997 Buick Riviera submodels:

• 1995-1997: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With 1-year Felpro limited warranty.

Fits the following 1977-1979 Buick Riviera submodels:

• 1979-1979: S; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"
• 1978-1979: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1978-1978: LXXV Anniversary Edition; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated, VIN L"

• 1977-1977: Base; 8 Cyl 5.7L; "VIN L"

Fits 2 more submodels. (Show all) Show less info

MR GASKET MANUAL TRANSMISSION GASKET KIT -- Overhaul gasket; With tail shaft seal; Made with extra thin gasket material; A reusable gasket that allows you to check transmission gears for wear without extra expense of replacement gaskets; Precision die cut for an excellent seal and fit; For use with 4-speed transmissions.

Fits the following 1964-1974 Buick Riviera submodels:

• 1964-1974: Base; All Engines;
• 1965-1971: Gran Sport; All Engines;

AC DELCO ENGINE CONTROL MODULE, REMANUFACTURED -- A high quality, OE replacement engine control module; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1983-1983 Buick Riviera submodels:

• 1983-1983: T-Type; 6 Cyl 3.8L; "GAS, CARB, Turbocharged, VIN 8"

WESTAR TORQUE STRUT MOUNT, SOLD INDIVIDUALLY -- This is a high quality, direct fit OE replacement torque strut mount.

Fits the following 1988-1993 Buick Riviera submodels:

• 1988-1993: Luxury; 6 Cyl 3.8L;
• 1988-1989: T-Type; 6 Cyl 3.8L;

STANDARD ENGINE CONTROL COMPUTER

A high quality, OE replacement engine control computer.

Specifications:

• 4 + 4 terminals
• Non-flashable
• Female connector
• 2 electrical connectors
• Male terminal

Fits the following 1981-1981 Buick Riviera submodels:

• 1981-1981: Base; 8 Cyl 5.0L; "VIN Y"
• 1981-1981: T-Type; 8 Cyl 5.0L; "VIN Y"

DEA Products
DEA Products is a supplier of OEM quality chassis components and engine mounts for the automotive aftermarket.

Fits the following 1988-1993 Buick Riviera submodels:

• 1988-1993: All Submodels; All Engines;

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1977-1979 Buick Riviera submodels:

• 1979-1979: S; 8 Cyl 5.7L;
• 1977-1979: Base; 8 Cyl 5.7L;

• 1978-1978: LXXV Anniversary Edition; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.

Fits the following 1995-1995 Buick Riviera submodels:

• 1995-1995: All Submodels; All Engines;

BLUE PRINT ENGINE ASSEMBLY, DRESSED, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 1.44 in. diameter valve springs
• 2.02 in. swirl polished intake valves
• 1.6 in. swirl polished exhaust valves
• 380 ft./lbs. of torque
• 9.5:1 compression ratio
• Dyno tested to produce 360 h.p.
• 4 bolt main block
• Square and parallel decked
• Align honed main bearing bore
• Hardened push rods, retainers, and springs
• Flat tappet hydraulic lifter
• New Dart aluminum cylinder heads
• Includes Professional Products dual plane satin finish intake manifold, Edelbrock 600 cfm carburetor, Signature series aluminum valve covers, and brass freeze plugs

Features:

• 110 degree lobe separation
• Duration at 0.05 in. lift is 224 intake/230 exhaust and maximum lift of 0.48 in. intake/0.49 in. exhaust
• Ignition timing: 13 to 16 degree initial/34 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat cast crankshaft, new Scat I-beam rods, Keith Black hypereutectic pistons with Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Driver side dipstick sold separately.

Fits the following 1977-1985 Buick Riviera submodels:

• 1983-1985: Luxury; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"
• 1977-1985: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"

• 1983-1983: XX Anniversary Edition; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"

• 1982-1982: Limited Edition; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"

• 1979-1980: S; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"

• 1978-1978: LXXV Anniversary Edition; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"

Fits 4 more submodels. (Show all) Show less info

DNJ ENGINE CYLINDER HEAD GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1991-1993 Buick Riviera submodels:

• 1991-1993: Luxury; 6 Cyl 3.8L; "VIN L"

AIRTEX FUEL PUMP, NEW -- For GAS applications; Mechanical; Precision built to meet or exceed OE specifications; Its construction features the latest in technology and OE design philosophy.

Fits the following 1971-1974 Buick Riviera submodels:

• 1971-1974: Base; 8 Cyl 7.5L;