Cadillac Engine Parts

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2000-2005 Cadillac DeVille submodels:

• 2000-2005: Base; 8 Cyl 4.6L;
• 2000-2005: DHS; 8 Cyl 4.6L;

• 2000-2005: DTS; 8 Cyl 4.6L;

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 2-bolt main

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and remanufactured heads
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1999-2000 Cadillac Escalade submodels:

• 1999-2000: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1980-1980 Cadillac Seville submodels:

• 1980-1980: Base; 8 Cyl 5.7L; "GAS"
• 1980-1980: Elegante; 8 Cyl 5.7L; "GAS"

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Includes premium valve stem seals; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; With 1-year Felpro limited warranty.

Fits the following 1968-1976 Cadillac Fleetwood submodels:

• 1976-1976: Brougham Talisman; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"
• 1976-1976: Brougham Talisman; 8 Cyl 8.2L; "GAS, FI, Naturally Aspirated, VIN S"

• 1976-1976: Brougham d'Elegance; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1976-1976: Brougham d'Elegance; 8 Cyl 8.2L; "GAS, FI, Naturally Aspirated, VIN S"

• 1976-1976: Brougham; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1976-1976: Brougham; 8 Cyl 8.2L; "GAS, FI, Naturally Aspirated, VIN S"

• 1975-1976: 60 Special Brougham; 8 Cyl 8.2L; "GAS, FI, Naturally Aspirated, VIN S"

• 1975-1976: 75; 8 Cyl 8.2L; "GAS, FI, Naturally Aspirated, VIN S"

• 1974-1976: 60 Special Brougham; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1972-1976: 75; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1973-1974: 60 Special Brougham; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN R"

• 1972-1974: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN R"

• 1972-1974: 60 Special; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1972-1974: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN R"

• 1972-1974: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN R"

• 1972-1974: Base; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN S"

• 1971-1971: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1971-1971: 60 Special; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1971-1971: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1971-1971: 75; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1971-1971: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1971-1971: Base; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 1"

• 1968-1971: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated"

• 1968-1971: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated"

• 1968-1971: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated"

• 1970-1970: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: 60 Special; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: 75; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: Base; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: Brougham; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1970-1970: Brougham; 8 Cyl 8.2L; "GAS, CARB, Naturally Aspirated, VIN 0"

• 1968-1970: Brougham; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated"

• 1969-1969: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 9"

• 1969-1969: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 9"

• 1969-1969: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 9"

• 1969-1969: Brougham; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 9"

• 1968-1968: 60 Special; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 8"

• 1968-1968: 75; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 8"

• 1968-1968: Base; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 8"

• 1968-1968: Brougham; 8 Cyl 7.7L; "GAS, CARB, Naturally Aspirated, VIN 8"

Fits 40 more submodels. (Show all) Show less info

AC DELCO ENGINE CONTROL MODULE, REMANUFACTURED -- A high quality, OE replacement engine control module; Replaces OE number 19186063; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1983-1985 Cadillac Fleetwood submodels:

• 1985-1985: 75 Formal; 8 Cyl 4.1L;
• 1985-1985: 75; 8 Cyl 4.1L;

• 1985-1985: Base; 8 Cyl 4.1L;

• 1985-1985: d'Elegance; 8 Cyl 4.1L;

• 1983-1985: Brougham d'Elegance; 8 Cyl 4.1L;

• 1983-1985: Brougham; 8 Cyl 4.1L;

Fits 4 more submodels. (Show all) Show less info

MSD ADVANCE WIRING HARNESS -- Magnetic trigger style; Comes with special Perma-Seal connectors to produce a plug-in installation.

Fits the following 1980-1995 Cadillac DeVille submodels:

• 1994-1995: Base; 8 Cyl 4.9L;
• 1986-1993: All Submodels; All Engines;

• 1982-1985: Base; 8 Cyl 4.1L;

• 1982-1985: Cabriolet; 8 Cyl 4.1L;

• 1982-1985: d'Elegance; 8 Cyl 4.1L;

• 1980-1982: Base; 6 Cyl 4.1L;

• 1980-1982: Cabriolet; 6 Cyl 4.1L;

• 1980-1982: d'Elegance; 6 Cyl 4.1L;

• 1980-1980: Base; 8 Cyl 6.0L;

• 1980-1980: Cabriolet; 8 Cyl 6.0L;

• 1980-1980: d'Elegance; 8 Cyl 6.0L;

Fits 9 more submodels. (Show all) Show less info

WESTAR ENGINE TORQUE STRUT, SOLD INDIVIDUALLY -- This is a high quality, direct fit OE replacement engine torque strut.

Fits the following 1993-2002 Cadillac Eldorado submodels:

• 2000-2002: ESC; All Engines;
• 2000-2002: ETC; All Engines;

• 1998-1999: ESC; 8 Cyl 4.6L;

• 1995-1999: ETC; 8 Cyl 4.6L;

• 1994-1997: Base; 8 Cyl 4.6L;

• 1993-1994: Touring; 8 Cyl 4.6L;

• 1993-1993: Sport; 8 Cyl 4.6L;

Fits 5 more submodels. (Show all) Show less info

Standard Engine Control Module

Standard Engine Control Module is the most suitable replacement unit of choice when it is time to repair your existing part. It has the precise style of your original Ignition Lock Cylinder that grants you to drive without trouble and your vehicle to operate with utmost competence.

• Manufactured from particularly selected materials
• Guarantees extensive service life

Specifications:

• Female Connector
• 2 Electrical Connectors
• 8 Male Blade Terminals

Fits the following 1981-1981 Cadillac Seville submodels:

• 1981-1981: Base; 6 Cyl 4.1L; "VIN 4"
• 1981-1981: Elegante; 6 Cyl 4.1L; "VIN 4"

DEA Products
DEA Products is a supplier of OEM quality chassis components and engine mounts for the automotive aftermarket.

Fits the following 1985-1988 Cadillac Cimarron submodels:

• 1985-1988: All Submodels; All Engines;

EMPIRE MOTOR SPORTS AIR CLEANER LID NUT, ALUMINUM, POLISHED -- Made of billet aluminum that is polished to a mirror shine; Designed to fit over or in place of the OEM part; Made in the USA; Easy installation.

Fits the following 1999-1999 Cadillac Escalade submodels:

• 1999-1999: All Submodels; All Engines;

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1995 Cadillac DeVille submodels:

• 1994-1995: Base; 8 Cyl 4.9L;
• 1990-1993: All Submodels; All Engines;

Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.

Fits the following 1994-1995 Cadillac Fleetwood submodels:

• 1994-1995: All Submodels; All Engines;

MR GASKET ENGINE BOLT KIT, CHROME -- Hex style; Bolt heads are individually polished to a high luster; Includes 24 0.25-20 x 0.5 intake bolts, 4 0.3125-18 x 0.75 in. timing cover bolts, oil pan bolts, fuel pump bolts, water neck bolts, long water pump bolts, header bolts, flat washers and AN washers; Designed with a professional appearance; Ideal for street rod or machines; With Mr Gasket's limited 90-day warranty.

Fits the following 1993-1993 Cadillac Fleetwood submodels:

• 1993-1993: All Submodels; All Engines;

BLUE PRINT ENGINE ASSEMBLY, BASE, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 1.44 in. diameter valve springs
• 2.02 in. swirl polished intake valves
• 1.6 in. swirl polished exhaust valves
• 470 ft./lbs. of torque
• 9.5:1 compression ratio
• Dyno tested to produce 430 h.p.
• 1.6 ratio rocker arms
• 4 bolt main block
• Square and parallel decked
• Align honed main bearing bore
• Hardened push rods, retainers, and springs
• Roller camshaft
• New Dart aluminum cylinder heads
• Includes Professional Products dual plane polished aluminum intake manifold, Signature series aluminum valve covers, and brass freeze plugs

Features:

• 110 degree lobe separation
• Duration at 220 intake/ 226 exhaust and maximum lift of 0.53 in. intake/0.54 in. exhaust
• Ignition timing: 16 to 18 degree initial/36 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat forged crankshaft, new Scat I-beam rods, new Probe forged pistons with Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Fits the following 2004-2005 Cadillac CTS submodels:

• 2004-2005: V; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated"

DNJ ENGINE CONVERSION GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1987-1988 Cadillac Cimarron submodels:

• 1987-1988: Base; 6 Cyl 2.8L;