Chevy Blazer Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• 2-bolt main
• 0.63 in. oil pick-up tube
• Valve covers bolt down the center

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1987-1994 Chevrolet Blazer submodels:

• 1994-1994: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"
• 1994-1994: Silverado Sport; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1987-1994: Silverado; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1992-1993: Cheyenne; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1988-1991: Scottsdale; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1987-1987: Custom Deluxe; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 4 more submodels. (Show all) Show less info

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1989-1992 Chevrolet Blazer submodels:

• 1992-1992: All Submodels; All Engines;
• 1989-1991: Scottsdale; 8 Cyl 5.7L;

• 1989-1991: Silverado; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET -- Does not include exhaust pipe flange and head bolts; A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1996-2005 Chevrolet Blazer submodels:

• 2005-2005: Base; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN X"
• 2003-2005: ZR2; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN X"

• 2003-2004: LS; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN X"

• 2003-2004: Xtreme; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN X"

• 2001-2002: Xtreme; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1996-2002: LS; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1999-2001: Trailblazer; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1996-2001: LT; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1996-1999: Base; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

Fits 7 more submodels. (Show all) Show less info

FELPRO PERMATORQUE CYLINDER HEAD GASKET SET -- Does not include head gaskets, head bolts, exhaust pipe packing, upper intake manifold gasket, positive control exhaust valve stem seals, valley pan, oil pan gasket, rear main seal, water pump gaskets, timing cover gaskets, timing cover seal, water neck gasket, fuel pump gasket, distributor gasket, fuel injector O-rings and upper intake manifold plenum; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Use with bolt prep Gra2 and installation aid Red3, Blu4 and Yel5; Head bolt replacement recommended.

Fits the following 1987-1994 Chevrolet Blazer submodels:

• 1994-1994: Base; 8 Cyl 6.5L; "DIESEL, FI, Turbocharged, VIN S"
• 1994-1994: Silverado Sport; 8 Cyl 6.5L; "DIESEL, FI, Turbocharged, VIN S"

• 1994-1994: Silverado; 8 Cyl 6.5L; "DIESEL, FI, Turbocharged, VIN S"

• 1988-1991: Scottsdale; 8 Cyl 6.2L; "DIESEL, FI, Naturally Aspirated, VIN C"

• 1987-1991: Silverado; 8 Cyl 6.2L; "DIESEL, FI, Naturally Aspirated, VIN C"

• 1987-1987: Custom Deluxe; 8 Cyl 6.2L; "DIESEL, FI, Naturally Aspirated, VIN C"

Fits 4 more submodels. (Show all) Show less info

MR GASKET ENGINE REBUILDER ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; With Mr. Gasket's limited 90-day warranty.

Fits the following 1969-1974 Chevrolet Blazer submodels:

• 1974-1974: Base; 8 Cyl 5.7L; "GAS, CARB, VIN V"
• 1974-1974: Base; 8 Cyl 5.7L; "GAS, CARB, VIN Y"

• 1970-1973: Base; 8 Cyl 5.0L;

• 1969-1973: Base; 8 Cyl 5.7L;

• 1971-1971: Base; 8 Cyl 5.0L; "VIN H"

• 1969-1969: Base; 8 Cyl 5.0L; "VIN E"

Fits 4 more submodels. (Show all) Show less info

AC DELCO ENGINE CONTROL MODULE ASSEMBLY, REMANUFACTURED -- A high quality, direct fit OE replacement engine control module assembly; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1987-1991 Chevrolet Blazer submodels:

• 1988-1991: Scottsdale; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"
• 1987-1991: Silverado; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1987-1987: Custom Deluxe; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN H"

• 1987-1987: Custom Deluxe; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

• 1987-1987: Silverado; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN H"

Fits 3 more submodels. (Show all) Show less info

SPECTRE ENGINE DRESS-UP KIT, CHROME -- Includes one pair of tall baffled valve covers and valve cover gaskets, eight spreader bars and T-bar hold downs, one breather, one dipstick and tube, two grommets, timing cover kit, and timing tab.

Fits the following 1969-1974 Chevrolet Blazer submodels:

• 1974-1974: Base; 8 Cyl 5.7L; "GAS, CARB, VIN V"
• 1974-1974: Base; 8 Cyl 5.7L; "GAS, CARB, VIN Y"

• 1970-1973: Base; 8 Cyl 5.0L;

• 1969-1973: Base; 8 Cyl 5.7L;

• 1971-1971: Base; 8 Cyl 5.0L; "VIN H"

• 1969-1969: Base; 8 Cyl 5.0L; "VIN E"

Fits 4 more submodels. (Show all) Show less info

STANDARD ENGINE CONTROL COMPUTER

A high quality, OE replacement engine control computer.

Specifications:

• 32 + 24 terminals
• Non-flashable
• Female connector
• 2 electrical connectors
• Male terminal
• Pin terminal type

Fits the following 1987-1993 Chevrolet Blazer submodels:

• 1993-1993: Cheyenne; 8 Cyl 5.7L;
• 1987-1993: Silverado; 8 Cyl 5.7L;

• 1992-1992: Cheyenne; 8 Cyl 5.7L; "VIN K"

• 1992-1992: Silverado; 8 Cyl 5.7L; "VIN K"

• 1988-1991: Scottsdale; 8 Cyl 5.7L;

• 1987-1987: Custom Deluxe; 8 Cyl 5.0L;

• 1987-1987: Custom Deluxe; 8 Cyl 5.7L;

• 1987-1987: Silverado; 8 Cyl 5.0L;

Fits 6 more submodels. (Show all) Show less info

EDELBROCK POWER PACKAGE TOP END KITS -- Includes Performer RPM hydraulic cams and lifters, 2 E-tec heads, Timing cover and seal set, cylinder head gasket and seal set, RPM Air-gap intake manifold, intake manifold kit for E-Tec heads, and cylinder head bolt set; With Edelbrock's limited 1-year warranty.

Fits the following 1969-1974 Chevrolet Blazer submodels:

• 1969-1974: Base; 8 Cyl 5.7L;
• 1969-1973: Base; 8 Cyl 5.0L;

RACING POWER CHEVROLET BILLET-STYLE CAST ALUMINUM DIPSTICK -- Includes O ring and seal; Made of heavy-duty billet-style cast aluminum, high-speed polished to a brilliant luster; Features ball-mill design-a definite difference from the all-chrome crowd; Has billet aluminum handle; Replaces original dipstick perfectly.

Fits the following 1973-1994 Chevrolet Blazer submodels:

• 1994-1994: Base; 8 Cyl 6.5L;
• 1994-1994: Silverado Sport; 8 Cyl 6.5L;

• 1994-1994: Silverado; 8 Cyl 6.5L;

• 1973-1974: Base; 8 Cyl 7.4L;

Fits 2 more submodels. (Show all) Show less info

EMPIRE MOTOR SPORTS WINDSHIELD WASHER TANK, ALUMINUM, POLISHED -- Made of billet aluminum that is polished to a mirror shine; Designed to fit over or in place of the OEM part; Made in the USA; Will not fit vehicles with dual battery tray; Easy installation.

Fits the following 1992-1994 Chevrolet Blazer submodels:

• 1994-1994: Base; All Engines;
• 1994-1994: Silverado Sport; All Engines;

• 1992-1994: Silverado; All Engines;

• 1992-1993: Cheyenne; All Engines;

Fits 2 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1991 Chevrolet Blazer submodels:

• 1990-1991: Scottsdale; 8 Cyl 6.2L;
• 1990-1991: Silverado; 8 Cyl 6.2L;

Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.

Fits the following 1994-1995 Chevrolet Blazer submodels:

• 1995-1995: Base; All Engines;
• 1995-1995: LT; All Engines;

• 1994-1994: Base; 8 Cyl 5.7L;

• 1994-1994: Base; 8 Cyl 6.5L;

• 1994-1994: Silverado Sport; 8 Cyl 5.7L;

• 1994-1994: Silverado Sport; 8 Cyl 6.5L;

• 1994-1994: Silverado; 8 Cyl 5.7L;

• 1994-1994: Silverado; 8 Cyl 6.5L;

Fits 6 more submodels. (Show all) Show less info

PROFESSIONAL PRODUCTS STAINLESS STEEL COMPLETE 12-POINT ENGINE BOLT KIT -- Includes Timing Cover Bolts And Washers, Oil Pan Bolts And Washers, Fuel Pump Bolts And Washers, Motor Mount Bolts And Washers, Intake Manifold Bolts And Washers, Water Pump Bolts And Washers, Thermostat Housing Bolts And Washers, Coil Bracket Bolts And Washers, Distributor Hold-Down Stud, Nut And Washer, Valve Cover Bolts And Washers, Alternator Bracket Bolts And Washers, Exhaust Headers Bolts And Washers

Fits the following 1969-1994 Chevrolet Blazer submodels:

• 1994-1994: Silverado Sport; 8 Cyl 5.7L;
• 1987-1994: Silverado; 8 Cyl 5.7L;

• 1969-1994: Base; 8 Cyl 5.7L;

• 1992-1993: All Submodels; All Engines;

• 1988-1991: Scottsdale; 8 Cyl 5.7L;

• 1987-1987: Custom Deluxe; 8 Cyl 5.0L;

• 1987-1987: Custom Deluxe; 8 Cyl 5.7L;

• 1987-1987: Silverado; 8 Cyl 5.0L;

• 1969-1973: Base; 8 Cyl 5.0L;

Fits 7 more submodels. (Show all) Show less info

TRANS-DAPT TRI-STEP OIL FILLER TUBE, CHROME -- Fits Both OEM And Aftermarket 1-1/4, 1-5/16, 1-1/2 Manifolds, Push In Oil Breather # 4802 Should Be Used

Fits the following 1969-1994 Chevrolet Blazer submodels:

• 1987-1994: All Submodels; All Engines;
• 1969-1974: Base; 8 Cyl 5.7L;

• 1973-1973: Base; 8 Cyl 7.4L;

• 1969-1973: Base; 8 Cyl 5.0L;

Fits 2 more submodels. (Show all) Show less info