Chevy Caprice Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, LT1, 2 bolt main, pin driven distributor, cast heads; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1994-1996 Chevrolet Caprice submodels:

• 1994-1994: Classic LS; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN P"
• 1994-1994: Classic; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN P"

• 1994-1996: Classic; All Engines;

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1966-1967 Chevrolet Caprice submodels:

• 1966-1967: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1966-1967 Chevrolet Caprice submodels:

• 1966-1967: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt main, canister oil filter, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Without accessory bolt holes on ends of heads; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1966-1969 Chevrolet Caprice submodels:

• 1966-1967: Base; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"
• 1968-1968: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN HJ"

• 1969-1969: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN FB"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt main, canister oil filter, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Without accessory bolt holes on ends of heads; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1966-1969 Chevrolet Caprice submodels:

• 1966-1967: Base; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"
• 1968-1968: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN HJ"

• 1969-1969: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN FB"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 Bolt starter, gasket style spark plug; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1967 Chevrolet Caprice submodels:

• 1967-1967: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 Bolt starter, gasket style spark plug; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1967 Chevrolet Caprice submodels:

• 1967-1967: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block numbers 854, 290, 466 and 440, spin on style oil filter; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Will not work for canister style oil filter; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1966-1969 Chevrolet Caprice submodels:

• 1966-1969: Base; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block numbers 854, 290, 466 and 440, spin on style oil filter; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Will not work for canister style oil filter; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1966-1969 Chevrolet Caprice submodels:

• 1966-1969: Base; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, 2 bolt main, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1969-1979 Chevrolet Caprice submodels:

• 1969-1971: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated"
• 1972-1972: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1973-1973: Estate; All Engines;

• 1973-1979: Classic; All Engines;

• 1978-1978: Classic Estate; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1978-1978: Classic Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1978-1978: Classic; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, 2 bolt main, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1969-1979 Chevrolet Caprice submodels:

• 1969-1971: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated"
• 1972-1972: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1973-1973: Estate; All Engines;

• 1973-1979: Classic; All Engines;

• 1978-1978: Classic Estate; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1978-1978: Classic Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1978-1978: Classic; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt starter; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Not for integral style intake manifold, this engine is supplied with heads for gasket spark plugs, and tapered seat spark plugs, may have to buy correct spark plugs for head; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1969 Chevrolet Caprice submodels:

• 1968-1969: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 or 3 bolt starter, tapered seat spark plugs; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Not for integral style intake manifold; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1979 Chevrolet Caprice submodels:

• 1968-1969: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1977-1979: Classic; All Engines;

• 1978-1978: Classic Landau; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

• 1978-1978: Classic; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 or 3 bolt starter, tapered seat spark plugs; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Not for integral style intake manifold; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1979 Chevrolet Caprice submodels:

• 1968-1969: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1977-1979: Classic; All Engines;

• 1978-1978: Classic Landau; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

• 1978-1978: Classic; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block cast numbers 636, 638, 371, 386 and 020, driver side dipstick, 2 piece rear seal; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968 Chevrolet Caprice submodels:

• 1968-1968: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN ME"