Chevy Impala Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2000-2004 Chevrolet Impala submodels:

• 2000-2004: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"
• 2000-2004: LS; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

• 2003-2003: LS Sport; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

• 2004-2004: SS; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2004 Chevrolet Impala submodels:

• 2004-2004: SS; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1960-1967 Chevrolet Impala submodels:

• 1960-1967: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: SS; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1960-1967 Chevrolet Impala submodels:

• 1960-1967: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: SS; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt main, canister oil filter, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Without accessory bolt holes on ends of heads; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1962-1969 Chevrolet Impala submodels:

• 1962-1967: Base; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: SS; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN HJ"

• 1969-1969: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN FB"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt main, canister oil filter, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Without accessory bolt holes on ends of heads; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1962-1969 Chevrolet Impala submodels:

• 1962-1967: Base; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: SS; 8 Cyl 5.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN HJ"

• 1969-1969: Base; 8 Cyl 5.4L; "GAS, CARB, Naturally Aspirated, VIN FB"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 Bolt starter, gasket style spark plug; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1965-1967 Chevrolet Impala submodels:

• 1965-1967: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1965-1967: SS; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 Bolt starter, gasket style spark plug; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1965-1967 Chevrolet Impala submodels:

• 1965-1967: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1965-1967: SS; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block numbers 854, 290, 466 and 440, spin on style oil filter; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Will not work for canister style oil filter; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1966-1969 Chevrolet Impala submodels:

• 1966-1967: SS; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"
• 1966-1969: Base; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block numbers 854, 290, 466 and 440, spin on style oil filter; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Will not work for canister style oil filter; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1966-1969 Chevrolet Impala submodels:

• 1966-1967: SS; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"
• 1966-1969: Base; 8 Cyl 6.5L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, 2 bolt main, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1969-1979 Chevrolet Impala submodels:

• 1969-1971: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated"
• 1972-1975: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1972-1974: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN K"

• 1973-1973: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN J"

• 1974-1979: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1975-1975: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1975-1975: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1975-1977: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1975-1979: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Custom Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: Custom Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: S; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: S; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1977: Custom; All Engines;

• 1977-1979: Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

Fits 16 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, 2 bolt main, driver side dipstick; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1969-1979 Chevrolet Impala submodels:

• 1969-1971: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated"
• 1972-1975: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1972-1974: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN K"

• 1973-1973: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN J"

• 1974-1979: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1975-1975: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1975-1975: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN H"

• 1975-1977: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1975-1979: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: Base; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Custom Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: Custom Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Custom; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: S; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

• 1976-1976: S; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1976: Sport; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN V"

• 1976-1977: Custom; All Engines;

• 1977-1979: Landau; 8 Cyl 5.7L; "Gas, CARB, Naturally Aspirated, VIN L"

Fits 16 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 or 3 bolt starter, tapered seat spark plugs; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Not for integral style intake manifold; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1979 Chevrolet Impala submodels:

• 1968-1971: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1972-1979: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

• 1977-1977: Custom; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

• 1977-1977: Custom; All Engines;

• 1977-1979: Landau; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

• 1979-1979: Sport; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

Fits 4 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 2 bolt starter; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Not for integral style intake manifold, this engine is supplied with heads for gasket spark plugs, and tapered seat spark plugs, may have to buy correct spark plugs for head; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1972 Chevrolet Impala submodels:

• 1968-1971: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated"
• 1972-1972: Base; 6 Cyl 4.1L; "Gas, CARB, Naturally Aspirated, VIN D"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block cast numbers 636, 638, 371, 386 and 020, driver side dipstick, 2 piece rear seal; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968 Chevrolet Impala submodels:

• 1968-1968: Base; 8 Cyl 5.0L; "GAS, CARB, Naturally Aspirated, VIN ME"