Chevy S10 Engine Parts

1982-1984 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG17314CW

Manufacturer Number: G17314C

zoom

List Price: $1,202.24
Our Price: $1,018.85
You Save: $183.39
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1982-1984 Chevrolet S10 submodels:

1982-1982: Gypsy; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1982-1982: High Sierra; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1982-1984 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG1732CW

Manufacturer Number: G1732C

zoom

List Price: $1,479.43
Our Price: $1,253.75
You Save: $225.68
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1982-1984 Chevrolet S10 submodels:

1982-1982: Gypsy; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1982-1982: High Sierra; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1982-1984 Chevrolet S10 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIG1732C

Manufacturer Number: G1732C

zoom

List Price: $1,453.41
Our Price: $1,231.70
You Save: $221.71
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1982-1984 Chevrolet S10 submodels:

1982-1982: Gypsy; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1982-1982: High Sierra; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1982-1984 Chevrolet S10 - Marshall Engines Engine Long Block Magnum Premium Long Block

Part Number: MEIG17314C

Manufacturer Number: G17314C

zoom

List Price: $1,177.51
Our Price: $997.89
You Save: $179.62
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Magnum Premium Long Block
Condition:	Remanufactured

Fits the following 1982-1984 Chevrolet S10 submodels:

1982-1982: Gypsy; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1982-1982: High Sierra; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1983-1984 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG1213CW

Manufacturer Number: G1213C

zoom

List Price: $1,619.93
Our Price: $1,372.82
You Save: $247.11
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $305.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1984 Chevrolet S10 submodels:

1983-1984: Base; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN Y"
1983-1984: Durango; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN Y"

1983-1984 Chevrolet S10 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIG1213C

Manufacturer Number: G1213C

zoom

List Price: $1,568.39
Our Price: $1,329.14
You Save: $239.25
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $250.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1983-1984 Chevrolet S10 submodels:

1983-1984: Base; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN Y"
1983-1984: Durango; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN Y"

1986 Chevrolet S10 - Marshall Engines Engine Long Block Magnum Premium Long Block

Part Number: MEIG17316C

Manufacturer Number: G17316C

zoom

List Price: $1,500.63
Our Price: $1,271.72
You Save: $228.91
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Magnum Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1986 Chevrolet S10 submodels:

1986-1986: Base; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"
1986-1986: Durango; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"

1985-1986 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG1519CW

Manufacturer Number: G1519C

zoom

List Price: $1,499.61
Our Price: $1,270.86
You Save: $228.75
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, non-grooved rear main cap; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1985-1986 Chevrolet S10 submodels:

1985-1986: Base; 4 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN E"
1985-1986: Durango; 4 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN E"

1986 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG1734CW

Manufacturer Number: G1734C

zoom

List Price: $1,219.92
Our Price: $1,033.83
You Save: $186.09
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1986 Chevrolet S10 submodels:

1986-1986: Base; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"
1986-1986: Durango; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"

1985 Chevrolet S10 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIG1733C

Manufacturer Number: G1733C

zoom

List Price: $1,453.41
Our Price: $1,231.70
You Save: $221.71
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1985 Chevrolet S10 submodels:

1985-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1985-1985: Durango; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1985 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG17315CW

Manufacturer Number: G17315C

zoom

List Price: $1,527.83
Our Price: $1,294.77
You Save: $233.06
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1985 Chevrolet S10 submodels:

1985-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1985-1985: Durango; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1985-1986 Chevrolet S10 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIG1517C

Manufacturer Number: G1517C

zoom

List Price: $1,473.01
Our Price: $1,248.31
You Save: $224.70
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, grooved rear main cap, block cast number 579, 032; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1985-1986 Chevrolet S10 submodels:

1985-1986: Base; 4 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN E"
1985-1986: Durango; 4 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN E"

1985 Chevrolet S10 - Marshall Engines Engine Long Block Magnum Premium Long Block

Part Number: MEIG17315C

Manufacturer Number: G17315C

zoom

List Price: $1,500.63
Our Price: $1,271.72
You Save: $228.91
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Magnum Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1985 Chevrolet S10 submodels:

1985-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1985-1985: Durango; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

1986 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG17316CW

Manufacturer Number: G17316C

zoom

List Price: $1,551.10
Our Price: $1,314.49
You Save: $236.61
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Improves lower end torque range and horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1986 Chevrolet S10 submodels:

1986-1986: Base; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"
1986-1986: Durango; 6 Cyl 2.8L; "Gas, FI, Naturally Aspirated, VIN R"

1985 Chevrolet S10 - Marshall Engines Engine Long Block

Part Number: MEIG1733CW

Manufacturer Number: G1733C

zoom

List Price: $1,503.38
Our Price: $1,274.05
You Save: $229.33
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, RWD, weighted flywheel; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1985 Chevrolet S10 submodels:

1985-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"
1985-1985: Durango; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN B"

Shop by Vehicle

Shop by Brand

Shop by Category

Shop by Brand

Shop by Price

Shop by Color

Shop by Condition

Shop by Material

Shop by Quantity Sold

Shop by Series

Why shop with us?

Secure shopping

Fits the following 1982-1984 Chevrolet S10 submodels:

Fits the following 1982-1984 Chevrolet S10 submodels:

Fits the following 1982-1984 Chevrolet S10 submodels:

Fits the following 1982-1984 Chevrolet S10 submodels:

Fits the following 1983-1984 Chevrolet S10 submodels:

Fits the following 1983-1984 Chevrolet S10 submodels:

Fits the following 1986 Chevrolet S10 submodels:

Fits the following 1985-1986 Chevrolet S10 submodels:

Fits the following 1986 Chevrolet S10 submodels:

Fits the following 1985 Chevrolet S10 submodels:

Fits the following 1985 Chevrolet S10 submodels:

Fits the following 1985-1986 Chevrolet S10 submodels:

Fits the following 1985 Chevrolet S10 submodels:

Fits the following 1986 Chevrolet S10 submodels:

Fits the following 1985 Chevrolet S10 submodels:

Featured Models

Featured Makes

Payment options

Customer Service

Worry-free Shopping

Company Info

My Account