Chevy Tracker Engine Parts

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 8-valve; Supplied with water pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1989-1991 Chevrolet Tracker submodels:

• 1989-1991: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 8-valve; Supplied with water pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1989-1991 Chevrolet Tracker submodels:

• 1989-1991: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; With crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1998 Chevrolet Tracker submodels:

• 1998-1998: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1998-1998: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; With crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1998 Chevrolet Tracker submodels:

• 1998-1998: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1998-1998: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1998-2003 Chevrolet Tracker submodels:

• 1998-2000: LSi; All Engines;
• 1998-2003: Base; All Engines;

• 2001-2003: LT; All Engines;

• 2001-2003: ZR2; All Engines;

Fits 2 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1998 Chevrolet Tracker submodels:

• 1998-1998: Base; All Engines;
• 1998-1998: LSi; All Engines;

BECK-ARNLEY ENGINE MOUNT -- A High Quality, Direct-Fit OEM Replacement Engine Mount

Fits the following 1989-1991 Chevrolet Tracker submodels:

• 1989-1991: All Submodels; All Engines;

BECK-ARNLEY ENGINE MOUNT -- A High Quality, Direct-Fit OEM Replacement Engine Mount

Fits the following 1989-1990 Chevrolet Tracker submodels:

• 1989-1990: Base; 4 Cyl 1.6L;

BECK-ARNLEY ENGINE MOUNT -- A High Quality, Direct-Fit OEM Replacement Engine Mount

Fits the following 1991 Chevrolet Tracker submodels:

• 1991-1991: Base; 4 Cyl 1.6L;

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1998-2000 Chevrolet Tracker submodels:

• 1998-2000: Base; 4 Cyl 1.6L; "GAS, FI, VIN 6"
• 1998-2000: LSi; 4 Cyl 1.6L; "GAS, FI, VIN 6"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket, and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; A high quality, direct fit OE replacement conversion gasket set; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1999-2003 Chevrolet Tracker submodels:

• 1999-2000: LSi; 4 Cyl 2.0L; "GAS, FI, VIN C"
• 1999-2003: Base; 4 Cyl 2.0L; "GAS, FI, VIN C"

• 2001-2003: LT; 4 Cyl 2.0L; "GAS, FI, VIN C"

• 2001-2003: ZR2; 4 Cyl 2.0L; "GAS, FI, VIN C"

Fits 2 more submodels. (Show all) Show less info

DAYCO CURVED RADIATOR HOSE -- Curved Radiator Hose, Knitted Reinforcement And All Synthetic EPDM Construction Provides The High Strength And Resistance To Oil, Mud, Salt, Road Debris, Ozone, Coolants, And Temperature Variations Of -40F (-40C) To +257F (+125C) That Are Required For OEM Hose Replacements, The Inner Base Tube Is Reinforced With Knitted Rayon For Maximum Strength And Burst Resistance For The Life Of The Hose

Fits the following 1989-1998 Chevrolet Tracker submodels:

• 1989-1991: Base; 4 Cyl 1.6L; "GAS, FI, VIN U"
• 1998-1998: Base; 4 Cyl 1.6L; "GAS, FI, VIN 6"

• 1998-1998: LSi; 4 Cyl 1.6L; "GAS, FI, VIN 6"

Fits 1 more submodels. (Show all) Show less info