Chevy Truck Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1960 Chevrolet Truck submodels:

• 1960-1960: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Non-threaded crank snout, block numbers 935, 812 and 944; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1960 Chevrolet Truck submodels:

• 1960-1960: Base; 8 Cyl 4.6L; "Gas, CARB, Naturally Aspirated"

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1942-1951 Chevrolet Truck submodels:

• 1942-1951: Base; All Engines;

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1949-1951 Chevrolet Truck submodels:

• 1949-1951: Base; All Engines;

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Does not include head bolts and 2-17/32 in. ID exhaust pipe packing; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; Head bolt replacement recommended; With Felpro's limited 1-year warranty.

Fits the following 1957-1960 Chevrolet Truck submodels:

• 1957-1957: Base; 8 Cyl 4.3L; "GAS, CARB"
• 1957-1960: Base; 8 Cyl 4.6L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1952 Chevrolet Truck submodels:

• 1952-1952: Base; 6 Cyl 3.9L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Copper-faced sandwich head gasket material; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1953-1960 Chevrolet Truck submodels:

• 1953-1960: Base; 6 Cyl 3.9L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1956-1959 Chevrolet Truck submodels:

• 1956-1959: Base; 8 Cyl 5.3L; "GAS, CARB"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1953-1960 Chevrolet Truck submodels:

• 1953-1960: Base; 6 Cyl 3.9L;

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Fiber-faced head gasket material; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1953-1960 Chevrolet Truck submodels:

• 1953-1960: Base; 6 Cyl 3.9L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1956-1959 Chevrolet Truck submodels:

• 1956-1959: Base; 8 Cyl 5.3L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1954-1959 Chevrolet Truck submodels:

• 1954-1959: Base; 6 Cyl 4.3L; "GAS, CARB"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1955-1960 Chevrolet Truck submodels:

• 1955-1957: Base; 8 Cyl 4.3L; "GAS, CARB"
• 1957-1960: Base; 8 Cyl 4.6L; "GAS, CARB"

FELPRO FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, valve stem seals, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Does not include head bolts and 2-17/32 in. ID exhaust pipe packing; An all inclusive set for a complete engine overhaul; For upper and lower engine work combined; Set contents may vary depending on application; Head bolt replacement recommended; With Felpro's limited 1-year warranty.

Fits the following 1957-1960 Chevrolet Truck submodels:

• 1957-1957: Base; 8 Cyl 4.3L; "GAS, CARB"
• 1957-1960: Base; 8 Cyl 4.6L; "GAS, CARB"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1957-1960 Chevrolet Truck submodels:

• 1957-1957: Base; 8 Cyl 4.3L; "GAS, CARB"
• 1957-1960: Base; 8 Cyl 4.6L; "GAS, CARB"