Chrysler Engine Parts

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2001-2009 Chrysler PT Cruiser submodels:

• 2008-2009: LX; 4 Cyl 2.4L;
• 2001-2009: Limited; 4 Cyl 2.4L;

• 2001-2009: Touring; 4 Cyl 2.4L;

• 2001-2008: Base; 4 Cyl 2.4L;

• 2003-2007: GT; 4 Cyl 2.4L;

• 2005-2006: Street Cruiser; 4 Cyl 2.4L;

• 2005-2005: Dream Cruiser; 4 Cyl 2.4L;

• 2001-2005: Classic; 4 Cyl 2.4L;

• 2002-2002: Dream; 4 Cyl 2.4L;

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• DOHC
• 16-valve
• Block cast number 642
• Head cast number 867

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, inner timing cover, and water pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1995-1999 Chrysler Sebring submodels:

• 1995-1999: LX; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"
• 1996-1998: LX; 4 Cyl 2.0L; "GAS, FI, ECF, Naturally Aspirated, VIN Y"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1991-1991 Chrysler LeBaron submodels:

• 1991-1991: Base; 6 Cyl 3.0L;
• 1991-1991: GTC; 6 Cyl 3.0L;

• 1991-1991: LX; 6 Cyl 3.0L;

Fits 1 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET, RUBBER -- Includes PermaDry molded rubber valve cover gasket and premium valve stem seals; Does not include head bolts, intake manifold gasket and exhaust pipe to manifold gasket; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Use with bolt prep Gra2 and installation aid Red3, Blu4 and Yel5; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 2000-2000 Chrysler Voyager submodels:

• 2000-2000: Base; 6 Cyl 3.3L; "FLEX, FI, Naturally Aspirated, VIN G"
• 2000-2000: Base; 6 Cyl 3.3L; "GAS, FI, Naturally Aspirated, VIN R"

• 2000-2000: SE; 6 Cyl 3.3L; "FLEX, FI, Naturally Aspirated, VIN G"

Fits 1 more submodels. (Show all) Show less info

MR GASKET ULTRA SEAL ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Made from high quality cellulose or nitrile composition gasket material; Features excellent resilience, high temperature endurance, will not creep or cold-flow, corrosion resistant and elastomer coating; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; Does not need retorquing; With Mr. Gasket's limited 90-day warranty.

Fits the following 1975-1978 Chrysler Cordoba submodels:

• 1975-1978: Base; 8 Cyl 6.6L;

MSD WIRING HARNESS -- Comes with special Perma-Seal connectors to produce a plug-in installation.

Fits the following 2000-2003 Chrysler Voyager submodels:

• 2000-2003: All Submodels; All Engines;
• 2002-2002: LX; 4 Cyl 2.4L;

• 2001-2002: Base; 4 Cyl 2.4L;

Fits 1 more submodels. (Show all) Show less info

Standard Engine Control Module

Standard have been renowned in engineering and distributing an across-the-board line of quality replacement parts. Standard continue their dedication in keeping incomparable service and manufacturing innovative merchandises for numerous vehicle applications.

Standard Engine Control Modules are constructed from strict manufacturing courses and test equipments that guarantee proper function and durability. These Engine Control Modules are built to operate along with the other components in the vehicle system for your utmost road experience.

Specifications:

• 10 terminals
• Non-flashable
• Female connector
• 1 electrical connector
• Male terminal
• Pin terminal type

Fits the following 1979-1979 Chrysler Newport submodels:

• 1979-1979: Base; 8 Cyl 5.2L;

TOP LINE ENGINE FULL GASKET SET -- Contains all the gaskets and seals required for a complete engine rebuild-head including, oil pan, intake manifold, valve cover, timing cover, water outlet, fuel pump mounting, oil pump cover gaskets, and valve stem and rear crankshaft seals; Does not include intake manifold valley gasket; May include head gaskets depending on application.

Fits the following 1983-1988 Chrysler New Yorker submodels:

• 1988-1988: Turbo; 4 Cyl 2.2L;
• 1983-1987: Base; 4 Cyl 2.2L;

DEA ENGINE TORQUE STRUT MOUNT -- Helps reduce wheel hop and traction loss; Prevents damage to other vehicle components; Resistant to oils, coolants, and road contaminants.

Fits the following 1986-1989 Chrysler LeBaron submodels:

• 1989-1989: GT; 4 Cyl 2.5L;
• 1989-1989: GTC; 4 Cyl 2.5L;

• 1989-1989: High Line; 4 Cyl 2.5L;

• 1987-1989: Premium; 4 Cyl 2.5L;

• 1986-1989: Base; 4 Cyl 2.5L;

• 1986-1989: GTS; 4 Cyl 2.5L;

• 1986-1986: Mark Cross; 4 Cyl 2.5L;

Fits 5 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Conversion type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 2005-2006 Chrysler Pacifica submodels:

• 2005-2006: Base; 6 Cyl 3.8L;

BLUE PRINT ENGINE ASSEMBLY, DRESSED, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 2.02 in. swirl polished intake valves
• 1.6 in. swirl polished exhaust valves
• 460 ft./lbs. of torque
• 9.8:1 compression ratio
• Dyno tested to produce 375 h.p.
• Seasoned 360 block
• Square and parallel decked
• Align honed main bearing bore
• Hardened push rods
• Hardened retainers and springs
• Flat tappet hydraulic lifter
• Blue Print magnum cast iron heads
• Includes Edelbrock RPM Air-Gap intake, Edelbrock fuel pump, Edelbrock 750 cfm carburetor, MSD Pro-Billet distributor, MSD Blaster 2 coil, Molar Performance black satin aluminum valve covers, and brass freeze plugs

Features:

• 110 degree lobe separation
• Duration at 233 intake/240 exhaust and maximum lift of 0.47 in. intake/0.47 in. exhaust
• Ignition timing: 13 to 16 degree initial/34 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat cast iron crankshaft, Keith Black hypereutectic pistons, heavy beam rods, Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Fits the following 1975-1980 Chrysler Cordoba submodels:

• 1980-1980: Crown; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"
• 1980-1980: LS; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

• 1979-1980: 300; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

• 1975-1980: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

DNJ ENGINE CONVERSION GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1983-1989 Chrysler Fifth Avenue submodels:

• 1983-1989: Base; 8 Cyl 5.2L;

WESTAR ENGINE TORQUE STRUT MOUNT, SOLD INDIVIDUALLY -- A high quality, direct fit OE replacement engine torque strut mount.

Fits the following 2004-2006 Chrysler Pacifica submodels:

• 2005-2006: Limited; 6 Cyl 3.5L;
• 2005-2006: Touring; 6 Cyl 3.5L;

• 2004-2006: Base; 6 Cyl 3.5L;

• 2005-2005: Base; 6 Cyl 3.8L;

Fits 2 more submodels. (Show all) Show less info

AIRTEX FUEL PUMP

Airtex Fuel Pump is developed with the latest technological advancements in fuel delivery systems and not only complies with OE specifications but also improves upon design and performance of aftermarket replacements. With Airtex you are sure to receive exceptional quality products.

Specifications:

• Mechanical Fuel Pump
• Includes gasket

Fits the following 1942-1952 Chrysler Windsor submodels:

• 1952-1952: Base; 6 Cyl 4.3L; "GAS"
• 1952-1952: Deluxe; 6 Cyl 4.3L; "GAS"

• 1951-1951: Deluxe; 6 Cyl 4.1L; "GAS"

• 1942-1951: Base; 6 Cyl 4.1L; "GAS"

Fits 2 more submodels. (Show all) Show less info

SPECTRA PREMIUM FUEL PUMP

Draw gas from the tank with a certified high-quality product that is Spectra Premium Fuel Pump. Equipped with ground-breaking features, Spectra's Fuel Pump is ready for action. It is 100% reliability tested for voltage, amperage, resistance, pressure, and volume. Its available models represent excess 90% of market demand on fuel modules and are even corrosion resistant, proving that Spectra Fuel Pump remains miles ahead of its competition. Spectra Fuel Pump is backed by 1-year Spectra limited warranty.

Specifications:

• Mechanical Fuel Pump
• Includes gasket
• Gas fuel type

Fits the following 1975-1975 Chrysler Cordoba submodels:

• 1975-1975: Base; 8 Cyl 6.6L; "GAS"