Chrysler Cordoba Engine Parts

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Includes premium valve stem seals; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; With 1-year Felpro limited warranty.

Fits the following 1980-1980 Chrysler Cordoba submodels:

• 1980-1980: 300; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"
• 1980-1980: 300; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1980-1980: Base; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: Crown; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1980-1980: Crown; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN D"

• 1980-1980: LS; 6 Cyl 3.7L; "GAS, CARB, Naturally Aspirated, VIN C"

Fits 5 more submodels. (Show all) Show less info

MR GASKET ULTRA SEAL ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Made from high quality cellulose or nitrile composition gasket material; Features excellent resilience, high temperature endurance, will not creep or cold-flow, corrosion resistant and elastomer coating; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; Does not need retorquing; With Mr. Gasket's limited 90-day warranty.

Fits the following 1975-1978 Chrysler Cordoba submodels:

• 1975-1978: Base; 8 Cyl 6.6L;

Standard Engine Control Module

Standard have been renowned in engineering and distributing an across-the-board line of quality replacement parts. Standard continue their dedication in keeping incomparable service and manufacturing innovative merchandises for numerous vehicle applications.

Standard Engine Control Modules are constructed from strict manufacturing courses and test equipments that guarantee proper function and durability. These Engine Control Modules are built to operate along with the other components in the vehicle system for your utmost road experience.

Specifications:

• 10 terminals
• Non-flashable
• Female connector
• 1 electrical connector
• Male terminal
• Pin terminal type

Fits the following 1979-1979 Chrysler Cordoba submodels:

• 1979-1979: 300; 8 Cyl 5.2L;
• 1979-1979: Base; 8 Cyl 5.2L;

BLUE PRINT ENGINE ASSEMBLY, DRESSED, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 2.02 in. swirl polished intake valves
• 1.6 in. swirl polished exhaust valves
• 460 ft./lbs. of torque
• 9.8:1 compression ratio
• Dyno tested to produce 375 h.p.
• Seasoned 360 block
• Square and parallel decked
• Align honed main bearing bore
• Hardened push rods
• Hardened retainers and springs
• Flat tappet hydraulic lifter
• Blue Print magnum cast iron heads
• Includes Edelbrock RPM Air-Gap intake, Edelbrock fuel pump, Edelbrock 750 cfm carburetor, MSD Pro-Billet distributor, MSD Blaster 2 coil, Molar Performance black satin aluminum valve covers, and brass freeze plugs

Features:

• 110 degree lobe separation
• Duration at 233 intake/240 exhaust and maximum lift of 0.47 in. intake/0.47 in. exhaust
• Ignition timing: 13 to 16 degree initial/34 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat cast iron crankshaft, Keith Black hypereutectic pistons, heavy beam rods, Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Fits the following 1975-1980 Chrysler Cordoba submodels:

• 1980-1980: Crown; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"
• 1980-1980: LS; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

• 1979-1980: 300; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

• 1975-1980: Base; 8 Cyl 5.9L; "GAS, CARB, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

DNJ ENGINE CONVERSION GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1976-1983 Chrysler Cordoba submodels:

• 1976-1983: Base; 8 Cyl 5.2L;
• 1981-1982: LS; 8 Cyl 5.2L;

• 1980-1980: Crown; 8 Cyl 5.2L;

• 1979-1980: 300; 8 Cyl 5.2L;

Fits 2 more submodels. (Show all) Show less info

AIRTEX FUEL PUMP, NEW -- For GAS applications; Mechanical; Precision built to meet or exceed OE specifications; Its construction features the latest in technology and OE design philosophy.

Fits the following 1975-1975 Chrysler Cordoba submodels:

• 1975-1975: Base; 8 Cyl 6.6L;