Dodge Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Flat tappet, transmission strut mounting hole is 10 in. from transmission bellhousing, left-hand side of block; Comes complete with adjusted valve train components, gasket set and new oil pump; Without emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1981-1989 Dodge W350 submodels:

• 1981-1982: Base; 8 Cyl 5.9L; "Gas, CARB, Naturally Aspirated, VIN T"
• 1982-1982: Base; 8 Cyl 5.9L; "Gas, CARB, Naturally Aspirated, VIN U"

• 1983-1987: Base; 8 Cyl 5.9L; "Gas, CARB, Naturally Aspirated, VIN W"

• 1983-1988: Base; 8 Cyl 5.9L; "Gas, CARB, Naturally Aspirated, VIN 1"

• 1987-1988: Base; 8 Cyl 5.9L; "Gas, CARB, Naturally Aspirated, VIN 5"

• 1989-1989: Base; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN 5"

• 1989-1989: Base; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES MAGNUM SERIES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- Roller tappet, 3 bolt motor mount, bolt on rockers, supplied with timing cover, oil pan, and oil pump installed; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Low cost, improves lower end torque and horsepower; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1998-2000 Dodge Durango submodels:

• 1998-2000: Base; 8 Cyl 5.2L; "Gas, FI, Naturally Aspirated, VIN Y"
• 1998-2000: SLT; 8 Cyl 5.2L; "Gas, FI, Naturally Aspirated, VIN Y"

• 1999-2000: SLT Plus; 8 Cyl 5.2L; "Gas, FI, Naturally Aspirated, VIN Y"

• 2000-2000: R/T; 8 Cyl 5.2L; "Gas, FI, Naturally Aspirated, VIN Y"

• 2000-2000: Sport; 8 Cyl 5.2L; "Gas, FI, Naturally Aspirated, VIN Y"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC; Comes complete with adjusted valve train components, gasket set and new oil pump; With crank and cam sensors; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1992-1996 Dodge Stealth submodels:

• 1992-1992: ES; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN B"
• 1992-1992: R/T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN B"

• 1993-1993: ES; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN J"

• 1993-1996: R/T; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN J"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES MAGNUM SERIES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Roller, bolt on rockers, 3 bolt motor mount; Low cost, high-torque power houses with greatly enhanced horsepower; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1998-2001 Dodge Durango submodels:

• 1998-2001: Base; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"
• 1998-2001: SLT; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"

• 1999-2000: SLT Plus; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"

• 2000-2000: Sport; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"

• 2000-2001: R/T; 8 Cyl 5.9L; "Gas, FI, Naturally Aspirated, VIN Z"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES DIESEL LONG BLOCK ENGINE, REMANUFACTURED -- 12-valve, 7 mm fuel injectors, For engine CPL number 1863, 2022, 2023, 2174, 2175, 2308; With valve covers, lifter cover and noise panel and oil filter adapter; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, gasket set and oil cooler; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1995-1997 Dodge Ram 3500 submodels:

• 1995-1996: Base; 6 Cyl 5.9L; "DIESEL, FI, Turbocharged, VIN C"
• 1997-1997: Base; 6 Cyl 5.9L; "DIESEL, FI, Turbocharged, VIN D"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, crank sensor ring has only 16 teeth, passenger side cam gear has 16 notches in sensor ring; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2002 Dodge Ram 1500 submodels:

• 2002-2002: Base; 8 Cyl 4.7L; "Gas, FI, Naturally Aspirated, VIN N"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, crank sensor ring has 32 teeth, passenger side cam gear has 15 notches in sensor ring; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2002-2004 Dodge Ram 1500 submodels:

• 2002-2003: Base; 8 Cyl 4.7L; "Gas, FI, Naturally Aspirated, VIN N"
• 2004-2004: SLT; 8 Cyl 4.7L; "FLEX, FI, Naturally Aspirated, VIN P"

• 2004-2004: SLT; 8 Cyl 4.7L; "Gas, FI, Naturally Aspirated, VIN N"

• 2004-2004: ST; 8 Cyl 4.7L; "FLEX, FI, Naturally Aspirated, VIN P"

• 2004-2004: ST; 8 Cyl 4.7L; "Gas, FI, Naturally Aspirated, VIN N"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- OHV, cast block, aluminum heads, without EGR hole passenger side front of head, HEMI rocker shaft style heads; Includes factory installed oil pan, timing cover, oil pump, pick-up tube, screen, and gasket set; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2003 Dodge Ram 3500 submodels:

• 2003-2003: Base; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN D"

MARSHALL ENGINES MAGNUM SERIES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- Multi-displacement; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Low cost, improves lower end torque and horsepower; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2006: Daytona R/T; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN H"
• 2006-2008: R/T; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN H"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, cast crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1971 Dodge W300 Pickup submodels:

• 1968-1969: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated, VIN 8"
• 1971-1971: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, cast crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1971 Dodge W300 Pickup submodels:

• 1968-1969: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated, VIN 8"
• 1971-1971: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, steel crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1971 Dodge W300 Pickup submodels:

• 1968-1969: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated, VIN 8"
• 1971-1971: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, steel crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1971 Dodge W300 Pickup submodels:

• 1968-1969: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated, VIN 8"
• 1971-1971: Base; 8 Cyl 6.3L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Forged crankshaft, block number 430, 830, 528, 857 head number 169, 654, 952, 035, has spark plug tubes, 1.962 centering ring on rear of crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1965-1967 Dodge Coronet submodels:

• 1965-1967: 440; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"
• 1966-1966: Deluxe; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"

• 1967-1967: 440; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

• 1967-1967: 500; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

• 1967-1967: Base; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

Fits 4 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Forged crankshaft, block number 430, 830, 528, 857 head number 169, 654, 952, 035, has spark plug tubes, 1.962 centering ring on rear of crankshaft; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1965-1967 Dodge Coronet submodels:

• 1965-1967: 440; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"
• 1966-1966: Deluxe; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated"

• 1967-1967: 440; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

• 1967-1967: 500; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

• 1967-1967: Base; 6 Cyl 3.7L; "Gas, CARB, Naturally Aspirated, VIN B"

Fits 4 more submodels. (Show all) Show less info