Dodge Daytona Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• SOHC
• Flat tappet
• 6-bolt flywheel

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1984-1985 Dodge Daytona submodels:

• 1984-1985: Turbo; 4 Cyl 2.2L; "GAS, FI, Turbocharged, VIN E"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1991-1991 Dodge Daytona submodels:

• 1991-1991: Base; 6 Cyl 3.0L;
• 1991-1991: ES; 6 Cyl 3.0L;

• 1991-1991: Iroc; 6 Cyl 3.0L;

Fits 1 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET -- A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1984-1993 Dodge Daytona submodels:

• 1989-1993: ES; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"
• 1986-1993: Base; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1984-1986: Base; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN D"

Fits 1 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET, MULTI-LAYERED STEEL -- Includes premium valve stem seals and head bolts without washers; Does not include exhaust pipe packing, 52.45 mm outside diameter camshaft rear seal and camshaft rear seal plug; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Requires washers; With 1-year Felpro limited warranty.

Fits the following 1985-1993 Dodge Daytona submodels:

• 1989-1993: ES; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"
• 1986-1993: Base; 4 Cyl 2.5L; "GAS, FI, Naturally Aspirated, VIN K"

• 1985-1986: Base; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN D"

Fits 1 more submodels. (Show all) Show less info

Standard Engine Control Module

Standard have been renowned in engineering and distributing an across-the-board line of quality replacement parts. Standard continue their dedication in keeping incomparable service and manufacturing innovative merchandises for numerous vehicle applications.

Standard Engine Control Modules are constructed from strict manufacturing courses and test equipments that guarantee proper function and durability. These Engine Control Modules are built to operate along with the other components in the vehicle system for your utmost road experience.

Specifications:

• 2 electrical connectors

Fits the following 1984-1984 Dodge Daytona submodels:

• 1984-1984: Base; 4 Cyl 2.2L; "VIN E"
• 1984-1984: Turbo; 4 Cyl 2.2L; "VIN E"

DEA ENGINE TORQUE STRUT MOUNT -- Helps reduce wheel hop and traction loss; Prevents damage to other vehicle components; Resistant to oils, coolants, and road contaminants.

Fits the following 1986-1987 Dodge Daytona submodels:

• 1986-1987: Base; 4 Cyl 2.5L;

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1993-1993 Dodge Daytona submodels:

• 1993-1993: Base; 4 Cyl 2.5L;
• 1993-1993: ES; 4 Cyl 2.5L;

DNJ ENGINE CYLINDER HEAD GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1984-1993 Dodge Daytona submodels:

• 1989-1993: ES; 4 Cyl 2.5L; "Naturally Aspirated"
• 1986-1993: Base; 4 Cyl 2.5L; "Naturally Aspirated"

• 1984-1986: Base; 4 Cyl 2.2L; "Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info