Dodge Neon Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• DOHC
• 16-valve
• Block cast number 642
• Head cast number 867

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, inner timing cover, and water pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1995-1995 Dodge Neon submodels:

• 1995-1995: High Line; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1995-1995 Dodge Neon submodels:

• 1995-1995: Base; All Engines;
• 1995-1995: High Line; All Engines;

• 1995-1995: Sport; All Engines;

Fits 1 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET -- A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1995-1999 Dodge Neon submodels:

• 1999-1999: ACR; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"
• 1999-1999: R/T; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1999-1999: Sport; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1995-1999: High Line; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1998-1998: ACR; 4 Cyl 2.0L; "GAS, FI, ECC, Naturally Aspirated, VIN Y"

• 1998-1998: R/T; 4 Cyl 2.0L; "GAS, FI, ECC, Naturally Aspirated, VIN Y"

• 1997-1998: High Line; 4 Cyl 2.0L; "GAS, FI, ECC, Naturally Aspirated, VIN Y"

• 1995-1998: Sport; 4 Cyl 2.0L; "GAS, FI, ECC, Naturally Aspirated, VIN Y"

• 1997-1997: Base; 4 Cyl 2.0L; "GAS, FI, ECC, Naturally Aspirated, VIN Y"

• 1996-1996: Base; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

Fits 8 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET -- Includes PermaDry molded rubber valve cover gaskets and premium valve stem seals; Does not include head bolts; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 2000-2005 Dodge Neon submodels:

• 2003-2005: SXT; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN C"
• 2001-2005: SE; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN C"

• 2000-2002: ES; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN C"

• 2001-2001: Base; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN C"

• 2000-2000: High Line; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN C"

Fits 3 more submodels. (Show all) Show less info

MSD WIRING HARNESS -- Comes with special Perma-Seal connectors to produce a plug-in installation.

Fits the following 1998-2003 Dodge Neon submodels:

• 1998-2003: All Submodels; All Engines;

STANDARD T-SERIES/TRU-TECH TEMPERATURE SENSOR -- 2 terminals; The temperature sensor design specifies tight tolerance thermistor response values to assure accuracy of the temperature measurement and proper part operation; 100 percent factory tested to ensure trouble-free performance; A high quality, direct fit OE replacement temperature sensor.

Fits the following 2000-2005 Dodge Neon submodels:

• 2003-2005: SXT; 4 Cyl 2.0L;
• 2001-2005: SE; 4 Cyl 2.0L;

• 2001-2004: R/T; 4 Cyl 2.0L;

• 2001-2002: ACR; 4 Cyl 2.0L;

• 2001-2002: ES; 4 Cyl 2.0L;

• 2000-2002: All Submodels; All Engines;

• 2001-2001: Base; 4 Cyl 2.0L;

Fits 5 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Conversion type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1995-1999 Dodge Neon submodels:

• 1999-1999: ACR; 4 Cyl 2.0L; "VIN Y"
• 1999-1999: High Line; 4 Cyl 2.0L; "VIN Y"

• 1999-1999: R/T; 4 Cyl 2.0L; "VIN Y"

• 1999-1999: Sport; 4 Cyl 2.0L; "VIN Y"

• 1998-1998: ACR; 4 Cyl 2.0L; "ECC"

• 1998-1998: R/T; 4 Cyl 2.0L; "ECC"

• 1995-1998: High Line; 4 Cyl 2.0L; "ECC"

• 1995-1998: Sport; 4 Cyl 2.0L; "ECC"

• 1996-1997: All Submodels; All Engines;

• 1995-1995: Base; 4 Cyl 2.0L; "ECC"

Fits 8 more submodels. (Show all) Show less info

DNJ FULL ENGINE GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1995-1995 Dodge Neon submodels:

• 1995-1995: Base; 4 Cyl 2.0L; "VIN C"
• 1995-1995: High Line; 4 Cyl 2.0L; "VIN C"

• 1995-1995: Sport; 4 Cyl 2.0L; "VIN C"

Fits 1 more submodels. (Show all) Show less info