Dodge Ram Pick Up Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• SOHC
• Rear wheel drive
• Block cast number 6G72

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1990-1991 Dodge Ram 50 submodels:

• 1990-1991: Base; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN S"
• 1990-1991: LE; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1990-1991: SE; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN S"

Fits 1 more submodels. (Show all) Show less info

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1990-1990 Dodge Ram 50 submodels:

• 1990-1990: Base; 4 Cyl 2.4L;
• 1990-1990: LE; 4 Cyl 2.4L;

• 1990-1990: SE; 4 Cyl 2.4L;

Fits 1 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET -- A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1983-1989 Dodge Ram 50 submodels:

• 1987-1989: Base; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"
• 1984-1989: Custom; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1984-1989: Sport; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1984-1985: Royal; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1983-1983: Royal; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN 7"

• 1983-1983: Sport; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN 7"

Fits 4 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET -- Includes PermaDry molded rubber valve cover gasket and premium valve stem seals; Does not include head bolts and exhaust pipe to converter; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Use with bolt prep Gra2 and installation aid Red3, Blu4 and Yel5; Head bolt replacement recommended.

Fits the following 1983-1989 Dodge Ram 50 submodels:

• 1987-1989: Base; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"
• 1984-1989: Custom; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1984-1989: Sport; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1984-1985: Royal; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1983-1983: Royal; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN 7"

• 1983-1983: Sport; 4 Cyl 2.6L; "GAS, CARB, Naturally Aspirated, VIN 7"

Fits 4 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1992 Dodge Ram 50 submodels:

• 1992-1992: All Submodels; All Engines;
• 1990-1991: Base; 4 Cyl 2.4L;

• 1990-1991: LE; 4 Cyl 2.4L;

• 1990-1991: SE; 4 Cyl 2.4L;

Fits 2 more submodels. (Show all) Show less info

DNJ ENGINE CYLINDER HEAD GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1983-1989 Dodge Ram 50 submodels:

• 1987-1989: Base; 4 Cyl 2.6L; "Naturally Aspirated"
• 1984-1989: Custom; 4 Cyl 2.6L; "Naturally Aspirated"

• 1983-1989: Sport; 4 Cyl 2.6L; "Naturally Aspirated"

• 1983-1985: Royal; 4 Cyl 2.6L; "Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

Fits the following 1985-1989 Dodge Ram 50 submodels:

• 1988-1989: Custom; All Engines;
• 1987-1989: Base; 4 Cyl 2.6L;

• 1985-1989: Sport; All Engines;

• 1985-1987: Custom; 4 Cyl 2.6L;

• 1985-1985: Royal; 4 Cyl 2.6L;

Fits 3 more submodels. (Show all) Show less info