Ford Engine Parts

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2000-2004 Ford Focus submodels:

• 2003-2004: LX; 4 Cyl 2.3L;
• 2003-2004: SE; 4 Cyl 2.3L;

• 2003-2004: ZTS; 4 Cyl 2.3L;

• 2003-2004: ZTW; 4 Cyl 2.3L;

• 2003-2004: ZX3; 4 Cyl 2.3L;

• 2003-2004: ZX5; 4 Cyl 2.3L;

• 2002-2004: SVT; 4 Cyl 2.0L;

• 2002-2004: ZX5; 4 Cyl 2.0L;

• 2000-2004: LX; 4 Cyl 2.0L;

• 2000-2004: SE; 4 Cyl 2.0L;

• 2000-2004: ZTS; 4 Cyl 2.0L;

• 2000-2004: ZX3; 4 Cyl 2.0L;

• 2002-2003: ZTW; 4 Cyl 2.0L;

• 2001-2002: S2; 4 Cyl 2.0L;

• 2001-2002: Street; 4 Cyl 2.0L;

• 2000-2000: Sony Limited Edition; 4 Cyl 2.0L;

Fits 14 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• Block cast numbers 86TM and 87TM
• 0.32 in. accessory mount holes

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1986-1990 Ford Ranger submodels:

• 1990-1990: S Plus; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"
• 1987-1990: Custom; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: S; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: STX; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1990: XLT; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1989-1989: GT; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1986: Base; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

• 1986-1986: XL; 6 Cyl 2.9L; "GAS, FI, Naturally Aspirated, VIN T"

Fits 6 more submodels. (Show all) Show less info

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1980-1984 Ford Thunderbird submodels:

• 1984-1984: Elan; 8 Cyl 5.0L;
• 1984-1984: Fila; 8 Cyl 5.0L;

• 1983-1984: LX; 8 Cyl 5.0L;

• 1983-1984: Sport; 8 Cyl 5.0L;

• 1980-1984: Base; 8 Cyl 5.0L;

• 1981-1983: Heritage; 8 Cyl 5.0L;

• 1980-1981: Town Landau; 8 Cyl 5.0L;

• 1980-1980: Silver Anniversary; 8 Cyl 5.0L;

Fits 6 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET, MULTI-LAYERED STEEL -- Consolidated design; Includes PermaDry molded rubber valve cover gasket and premium valve stem seals; Does not include head bolts; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Head bolt replacement recommended; With 1-year Felpro limited warranty.

Fits the following 1996-2000 Ford Taurus submodels:

• 2000-2000: SE 2-Valve; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"
• 2000-2000: SE 2-Valve; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 2000-2000: SVG; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"

• 2000-2000: SVG; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 1999-2000: LX; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"

• 1999-2000: LX; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 1998-2000: SE Comfort; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"

• 1998-2000: SE Comfort; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 1998-2000: SE; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"

• 1998-2000: SE; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 1998-1998: SE Comfort; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 1"

• 1998-1998: SE; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 1"

• 1996-1997: G; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

• 1996-1997: GL; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 1"

• 1996-1997: GL; 6 Cyl 3.0L; "FLEX, FI, Naturally Aspirated, VIN 2"

• 1996-1997: GL; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN U"

Fits 14 more submodels. (Show all) Show less info

MR GASKET ENGINE REBUILDER ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; With Mr. Gasket's limited 90-day warranty.

Fits the following 1971-1971 Ford M-400 submodels:

• 1971-1971: Base; 8 Cyl 6.4L;

AC DELCO ELECTRONIC IGNITION CONTROL MODULE, NEW

A high quality, OE replacement electronic ignition control module.

Fits the following 1988-1997 Ford F-350 submodels:

• 1997-1997: Base; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"
• 1997-1997: Base; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1997-1997: Lariat; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1997-1997: Lariat; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1993-1997: XLT; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1993-1997: XLT; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1991-1997: XL; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1988-1997: XL; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1995-1996: Eddie Bauer; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1995-1996: Eddie Bauer; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1995-1996: Special; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1995-1996: Special; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1992-1992: Custom; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: XL; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: XLT Lariat; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1991-1992: Custom; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1991-1992: XLT Lariat; 8 Cyl 5.8L; "GAS, FI, Naturally Aspirated, VIN H"

• 1988-1992: Custom; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 1988-1992: XLT Lariat; 8 Cyl 7.5L; "GAS, FI, Naturally Aspirated, VIN G"

Fits 17 more submodels. (Show all) Show less info

MSD WIRING HARNESS -- Magnetic trigger style; Plugs directly into factory coil and harness; Four color coded wires plug into the corresponding wires of the MSD and two wires go from the MSD to the battery; With no cutting or splicing required; Handy for quick installation on late model vehicles; With 1-year MSD limited warranty.

Fits the following 1984-1997 Ford F-350 submodels:

• 1997-1997: Base; 8 Cyl 5.8L;
• 1997-1997: Base; 8 Cyl 7.5L;

• 1997-1997: Lariat; 8 Cyl 5.8L;

• 1997-1997: Lariat; 8 Cyl 7.5L;

• 1993-1997: XLT; 8 Cyl 5.8L;

• 1993-1997: XLT; 8 Cyl 7.5L;

• 1988-1997: XL; 8 Cyl 5.8L;

• 1988-1997: XL; 8 Cyl 7.5L;

• 1995-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1995-1996: Eddie Bauer; 8 Cyl 7.5L;

• 1995-1996: Special; 8 Cyl 5.8L;

• 1995-1996: Special; 8 Cyl 7.5L;

• 1995-1995: Eddie Bauer; 6 Cyl 4.9L;

• 1995-1995: Special; 6 Cyl 4.9L;

• 1984-1995: XL; 6 Cyl 4.9L;

• 1984-1995: XLT; 6 Cyl 4.9L;

• 1988-1992: Custom; 8 Cyl 5.8L;

• 1988-1992: Custom; 8 Cyl 7.5L;

• 1988-1992: XLT Lariat; 8 Cyl 5.8L;

• 1988-1992: XLT Lariat; 8 Cyl 7.5L;

• 1987-1992: Custom; 6 Cyl 4.9L;

• 1985-1992: XLT Lariat; 6 Cyl 4.9L;

• 1984-1986: Base; 6 Cyl 4.9L;

Fits 21 more submodels. (Show all) Show less info

SPECTRE ENGINE DRESS-UP KIT, CHROME -- Includes stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, grommets, and a stainless steel braided PCV hose with red and blue Magna-Clamps.

Fits the following 1975-1997 Ford F-350 submodels:

• 1997-1997: Lariat; 8 Cyl 5.8L;
• 1982-1997: XL; 8 Cyl 5.8L;

• 1977-1997: Base; 8 Cyl 5.8L;

• 1977-1997: XLT; 8 Cyl 5.8L;

• 1995-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1995-1996: Special; 8 Cyl 5.8L;

• 1982-1992: XLT Lariat; 8 Cyl 5.8L;

• 1977-1992: Custom; 8 Cyl 5.8L;

• 1982-1983: XLS; 8 Cyl 5.8L;

• 1978-1981: Ranger Lariat; 8 Cyl 5.8L;

• 1977-1981: Ranger XLT; 8 Cyl 5.8L;

• 1977-1981: Ranger; 8 Cyl 5.8L;

• 1978-1980: Ranger Lariat; 8 Cyl 5.0L;

• 1975-1980: Custom; 8 Cyl 5.0L;

• 1975-1980: Ranger XLT; 8 Cyl 5.0L;

• 1975-1980: Ranger; 8 Cyl 5.0L;

• 1977-1978: Northland; 8 Cyl 5.8L;

• 1976-1978: Base; 8 Cyl 5.0L;

• 1975-1978: Northland; 8 Cyl 5.0L;

• 1977-1977: XLT; 8 Cyl 5.0L;

Fits 18 more submodels. (Show all) Show less info

Standard Engine Control Module

Standard Engine Control Module is the most suitable replacement unit of choice when it is time to repair your existing part. It has the precise style of your original Ignition Lock Cylinder that grants you to drive without trouble and your vehicle to operate with utmost competence.

• Manufactured from particularly selected materials
• Guarantees extensive service life

Specifications:

• Female Connector
• 1 Electrical Connectors
• 32 Male Pin Terminals

Fits the following 1979-1979 Ford LTD submodels:

• 1979-1979: Base; 8 Cyl 5.8L; "VIN H"
• 1979-1979: Country Squire; 8 Cyl 5.8L; "VIN H"

• 1979-1979: Landau; 8 Cyl 5.8L; "VIN H"

Fits 1 more submodels. (Show all) Show less info

MOTORCRAFT CATALYST MONITOR SENSOR CONNECTOR -- A high quality, direct fit OE replacement catalyst monitor sensor connector; Replaces OE part number 14S411.

Fits the following 2011-2011 Ford F-550 Super Duty submodels:

• 2011-2011: All Submodels; All Engines;

EDELBROCK POWER PACKAGE TOP END KITS -- Includes Performer RPM hydraulic cams and lifters, 2 performer RPM heads, Timing cover and seal set, cylinder head gasket and seal set, RPM Air-gap 351w intake manifold, intake manifold kit, Performer-link timing set and cylinder head bolt set; With Edelbrock's limited 1-year warranty.

Fits the following 1965-1985 Ford LTD submodels:

• 1985-1985: LX Brougham; 8 Cyl 5.0L;
• 1980-1985: Crown Victoria; 8 Cyl 5.0L;

• 1979-1985: Country Squire; 8 Cyl 5.0L;

• 1970-1985: Brougham; 8 Cyl 5.0L;

• 1968-1985: Base; 8 Cyl 5.0L;

• 1980-1982: S; 8 Cyl 5.0L;

• 1977-1979: Landau; 8 Cyl 5.0L;

• 1965-1968: Base; 8 Cyl 4.7L;

Fits 6 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1992 Ford Ranger submodels:

• 1991-1992: Sport; 6 Cyl 2.9L;
• 1990-1992: Custom; 6 Cyl 2.9L;

• 1990-1992: S; 6 Cyl 2.9L;

• 1990-1992: STX; 6 Cyl 2.9L;

• 1990-1992: XLT; 6 Cyl 2.9L;

• 1990-1990: S Plus; 6 Cyl 2.9L;

Fits 4 more submodels. (Show all) Show less info

DEA ENGINE TORQUE STRUT MOUNT -- Helps reduce wheel hop and traction loss; Prevents damage to other vehicle components; Resistant to oils, coolants, and road contaminants.

Fits the following 2010-2011 Ford Transit Connect submodels:

• 2011-2011: XLT Premium; 4 Cyl 2.0L;
• 2010-2011: XL; 4 Cyl 2.0L;

• 2010-2011: XLT; 4 Cyl 2.0L;

Fits 1 more submodels. (Show all) Show less info

CORTECO CYLINDER HEAD GASKET SET -- Meets or exceeds original equipment specifications; Does not includes intake manifold gaskets, valve cover gasket, and valve seal.

Fits the following 1969-1972 Ford Custom submodels:

• 1969-1972: All Submodels; All Engines;

DNJ ENGINE CONVERSION GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1975-1989 Ford E-250 Econoline submodels:

• 1988-1989: Custom; 8 Cyl 5.0L; "VIN N"
• 1986-1989: XL; 8 Cyl 5.0L; "VIN N"

• 1986-1986: Base; 8 Cyl 5.0L; "VIN N"

• 1983-1985: XL; 8 Cyl 5.0L; "VIN F"

• 1980-1985: Base; 8 Cyl 5.0L; "VIN F"

• 1980-1983: Custom; 8 Cyl 5.0L; "VIN F"

• 1980-1982: Chateau; 8 Cyl 5.0L; "VIN F"

• 1975-1979: Base; 8 Cyl 5.0L; "VIN G"

• 1975-1979: Chateau; 8 Cyl 5.0L; "VIN G"

• 1975-1979: Custom; 8 Cyl 5.0L; "VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "VIN G"

Fits 9 more submodels. (Show all) Show less info