Ford Bronco Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• 6-bolt bell housing

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with emissions equipment.

Fits the following 1966-1968 Ford Bronco submodels:

• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN C"
• 1968-1968: Roadster; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1968-1968: Wagon; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN N"

• 1966-1968: Base; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1966-1968: Base; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated, VIN N"

• 1966-1967: Base; 8 Cyl 4.7L; "GAS, CARB, Naturally Aspirated"

Fits 5 more submodels. (Show all) Show less info

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1981-1983 Ford Bronco submodels:

• 1982-1983: XLS; 8 Cyl 5.0L;
• 1982-1983: XLT Lariat; 8 Cyl 5.0L;

• 1981-1983: Custom; 8 Cyl 5.0L;

• 1981-1981: Ranger XLT; 8 Cyl 5.0L;

Fits 2 more submodels. (Show all) Show less info

CYLINDER HEAD GASKET SET -- A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1990-1996 Ford Bronco submodels:

• 1995-1996: XLT Sport; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"
• 1990-1996: Eddie Bauer; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1996: XL; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1996: XLT; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1993-1993: XLT Lariat; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1993: Custom; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1992-1992: XLT Nite; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

Fits 5 more submodels. (Show all) Show less info

FELPRO PERMATORQUE HEAD GASKET SET -- Includes premium valve stem seals; Does not include exhaust pipe flange and packing; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods.

Fits the following 1966-1974 Ford Bronco submodels:

• 1974-1974: Base; 6 Cyl 3.3L; "GAS, CARB, Naturally Aspirated, VIN T"
• 1973-1973: Wagon; 6 Cyl 3.3L; "GAS, CARB, Naturally Aspirated, VIN T"

• 1968-1972: Wagon; 6 Cyl 2.8L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1966-1972: Base; 6 Cyl 2.8L; "GAS, CARB, Naturally Aspirated, VIN F"

• 1968-1969: Roadster; 6 Cyl 2.8L; "GAS, CARB, Naturally Aspirated, VIN F"

Fits 3 more submodels. (Show all) Show less info

MR GASKET ULTRA SEAL ENGINE OVERHAUL GASKET SET -- Full gasket set type; Includes gaskets for the cylinder head, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump and valve covers, and seals; Made from high quality cellulose or nitrile composition gasket material; Features excellent resilience, high temperature endurance, will not creep or cold-flow, corrosion resistant and elastomer coating; Designed to rebuild stock engines; Engineered to meet or exceed OE gasket and seal specifications; Does not need retorquing; With Mr. Gasket's limited 90-day warranty.

Fits the following 1966-1976 Ford Bronco submodels:

• 1975-1976: All Submodels; All Engines;
• 1968-1974: Base; 8 Cyl 5.0L;

• 1968-1973: Wagon; 8 Cyl 5.0L;

• 1968-1969: Roadster; 8 Cyl 5.0L;

• 1968-1968: Base; 8 Cyl 4.7L; "VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "VIN N"

• 1966-1967: Base; 8 Cyl 4.7L;

Fits 6 more submodels. (Show all) Show less info

AC DELCO ELECTRONIC IGNITION CONTROL MODULE, NEW

A high quality, OE replacement electronic ignition control module.

Fits the following 1990-1996 Ford Bronco submodels:

• 1995-1996: XLT Sport; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"
• 1990-1996: Eddie Bauer; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1996: XL; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1996: XLT; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1993-1993: XLT Lariat; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1990-1993: Custom; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1992-1992: Custom; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: Eddie Bauer; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: XL; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: XLT Nite; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1992-1992: XLT Nite; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1992-1992: XLT; 6 Cyl 4.9L; "GAS, FI, Naturally Aspirated, VIN Y"

Fits 10 more submodels. (Show all) Show less info

MSD WIRING HARNESS -- Magnetic trigger style; Plugs directly into factory coil and harness; Four color coded wires plug into the corresponding wires of the MSD and two wires go from the MSD to the battery; With no cutting or splicing required; Handy for quick installation on late model vehicles; With 1-year MSD limited warranty.

Fits the following 1983-1996 Ford Bronco submodels:

• 1985-1996: All Submodels; All Engines;
• 1990-1991: XL; 6 Cyl 4.9L;

• 1990-1991: XL; 8 Cyl 5.0L;

• 1986-1991: Custom; 8 Cyl 5.0L;

• 1986-1991: Eddie Bauer; 6 Cyl 4.9L;

• 1986-1991: Eddie Bauer; 8 Cyl 5.0L;

• 1986-1991: XLT; 8 Cyl 5.0L;

• 1984-1991: Custom; 6 Cyl 4.9L;

• 1984-1991: XLT; 6 Cyl 4.9L;

• 1984-1984: XLT; 8 Cyl 5.8L;

• 1983-1984: Custom; 8 Cyl 5.8L;

• 1983-1983: XLS; 8 Cyl 5.8L;

• 1983-1983: XLT Lariat; 8 Cyl 5.8L;

Fits 11 more submodels. (Show all) Show less info

SPECTRE ENGINE DRESS-UP KIT, CHROME -- Includes stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, grommets, and a stainless steel braided PCV hose with red and blue Magna-Clamps.

Fits the following 1966-1996 Ford Bronco submodels:

• 1995-1996: XLT Sport; 8 Cyl 5.8L;
• 1990-1996: XL; 8 Cyl 5.8L;

• 1985-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1984-1996: XLT; 8 Cyl 5.8L;

• 1982-1993: XLT Lariat; 8 Cyl 5.8L;

• 1978-1993: Custom; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

• 1985-1988: Eddie Bauer; 8 Cyl 5.0L;

• 1984-1988: XLT; 8 Cyl 5.0L;

• 1980-1988: Custom; 8 Cyl 5.0L;

• 1982-1983: XLS; 8 Cyl 5.0L;

• 1982-1983: XLS; 8 Cyl 5.8L;

• 1982-1983: XLT Lariat; 8 Cyl 5.0L;

• 1980-1981: Ranger XLT; 8 Cyl 5.0L;

• 1978-1981: Ranger XLT; 8 Cyl 5.8L;

• 1978-1978: Northland; 8 Cyl 5.8L;

• 1975-1977: All Submodels; All Engines;

• 1968-1974: Base; 8 Cyl 5.0L;

• 1968-1973: Wagon; 8 Cyl 5.0L;

• 1968-1969: Roadster; 8 Cyl 5.0L;

• 1968-1968: Base; 8 Cyl 4.7L; "VIN N"

• 1968-1968: Roadster; 8 Cyl 4.7L; "VIN N"

• 1968-1968: Wagon; 8 Cyl 4.7L; "VIN N"

• 1966-1967: Base; 8 Cyl 4.7L;

Fits 22 more submodels. (Show all) Show less info

STANDARD ENGINE CONTROL COMPUTER

A high quality, OE replacement engine control computer.

Specifications:

• 32 + 25 terminals
• Non-flashable
• Male and female connector
• 2 electrical connectors
• Male and Female terminal
• Pin terminal type

Fits the following 1981-1983 Ford Bronco submodels:

• 1982-1983: XLS; 8 Cyl 5.0L; "VIN F"
• 1982-1983: XLS; 8 Cyl 5.8L; "VIN G"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.8L; "VIN G"

• 1981-1983: Custom; 8 Cyl 5.0L; "VIN F"

• 1981-1983: Custom; 8 Cyl 5.8L; "VIN G"

• 1981-1981: Ranger XLT; 8 Cyl 5.0L; "VIN F"

• 1981-1981: Ranger XLT; 8 Cyl 5.8L; "VIN G"

Fits 6 more submodels. (Show all) Show less info

MOTORCRAFT CATALYST MONITOR SENSOR CONNECTOR -- A high quality, direct fit OE replacement catalyst monitor sensor connector; Replaces OE part number 14S411.

Fits the following 1996-1996 Ford Bronco submodels:

• 1996-1996: All Submodels; All Engines;

EDELBROCK POWER PACKAGE TOP END KITS -- Includes Performer RPM hydraulic cams and lifters, 2 performer RPM heads, Timing cover and seal set, cylinder head gasket and seal set, RPM Air-gap 351w intake manifold, intake manifold kit, Performer-link timing set and cylinder head bolt set; With Edelbrock's limited 1-year warranty.

Fits the following 1966-1984 Ford Bronco submodels:

• 1984-1984: XLT; 8 Cyl 5.0L;
• 1980-1984: Custom; 8 Cyl 5.0L;

• 1982-1983: XLS; 8 Cyl 5.0L;

• 1982-1983: XLT Lariat; 8 Cyl 5.0L;

• 1980-1981: Ranger XLT; 8 Cyl 5.0L;

• 1975-1977: All Submodels; All Engines;

• 1968-1974: Base; 8 Cyl 5.0L;

• 1968-1973: Wagon; 8 Cyl 5.0L;

• 1968-1969: Roadster; 8 Cyl 5.0L;

• 1968-1968: Roadster; 8 Cyl 4.7L;

• 1968-1968: Wagon; 8 Cyl 4.7L;

• 1966-1968: Base; 8 Cyl 4.7L;

Fits 10 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1990-1990 Ford Bronco submodels:

• 1990-1990: Custom; 8 Cyl 5.0L;
• 1990-1990: Eddie Bauer; 8 Cyl 5.0L;

• 1990-1990: XL; 8 Cyl 5.0L;

• 1990-1990: XLT; 8 Cyl 5.0L;

Fits 2 more submodels. (Show all) Show less info

DNJ ENGINE CONVERSION GASKET SET -- Designed to meet or exceed OE specifications; Manufactured with associates who hold an ISO9002 or QS9000 certificate that is achieved only by meeting the highest of manufacturing standards; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1966-1989 Ford Bronco submodels:

• 1985-1989: Custom; 8 Cyl 5.0L; "VIN N"
• 1985-1989: Eddie Bauer; 8 Cyl 5.0L; "VIN N"

• 1985-1989: XLT; 8 Cyl 5.0L; "VIN N"

• 1984-1984: XLT; 8 Cyl 5.0L; "VIN F"

• 1980-1984: Custom; 8 Cyl 5.0L; "VIN F"

• 1982-1983: XLS; 8 Cyl 5.0L; "VIN F"

• 1982-1983: XLT Lariat; 8 Cyl 5.0L; "VIN F"

• 1980-1981: Ranger XLT; 8 Cyl 5.0L; "VIN F"

• 1975-1977: Custom; 8 Cyl 5.0L; "VIN G"

• 1975-1977: Sport; 8 Cyl 5.0L; "VIN G"

• 1975-1975: Northland; 8 Cyl 5.0L; "VIN G"

• 1975-1975: Ranger; 8 Cyl 5.0L; "VIN G"

• 1968-1974: Base; 8 Cyl 5.0L; "VIN G"

• 1968-1973: Wagon; 8 Cyl 5.0L; "VIN G"

• 1968-1969: Roadster; 8 Cyl 5.0L; "VIN G"

• 1968-1968: Roadster; 8 Cyl 4.7L; "VIN C"

• 1968-1968: Wagon; 8 Cyl 4.7L; "VIN C"

• 1966-1968: Base; 8 Cyl 4.7L; "VIN C"

Fits 16 more submodels. (Show all) Show less info

AIRTEX FUEL PUMP, NEW -- For GAS applications; Mechanical; Precision built to meet or exceed OE specifications; Its construction features the latest in technology and OE design philosophy.

Fits the following 1967-1969 Ford Bronco submodels:

• 1969-1969: Roadster; 6 Cyl 2.8L;
• 1969-1969: Wagon; 6 Cyl 2.8L;

• 1967-1969: Base; 6 Cyl 2.8L;

Fits 1 more submodels. (Show all) Show less info

CHILTON FORD ENGINE OVERHAUL MANUAL -- English; Paperback; Features easy-to-follow, step-by-step instructions on how to overhaul, rebuild, disassemble, and install your vehicle's engine; Covers 1960-1990 Ford Models with V8 engines, from 255 to 460 cid.

Fits the following 1966-1996 Ford Bronco submodels:

• 1966-1996: All Submodels; All Engines;