Ford Contour Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With hydraulic lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1995-1997 Ford Contour submodels:

• 1995-1997: GL; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 1995-1997: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1996-1996: Sport; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1997-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 24-valve, Duratec engine, block number F7OE-AA, hydraulic lifters, roller cam, head cast number F53E, F73E; Comes complete with adjusted valve train components, gasket set and new oil pump; Without intake camshaft dampener; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1995-2000 Ford Contour submodels:

• 1995-1998: GL; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"
• 1995-2000: LX; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1995-2000: SE; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1996-1997: Sport; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1999-2000: SVT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 24-valve, Duratec engine, block number F7OE-AA, hydraulic lifters, roller cam, head cast number F53E, F73E; Comes complete with adjusted valve train components, gasket set and new oil pump; Without intake camshaft dampener; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1995-2000 Ford Contour submodels:

• 1995-1998: GL; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"
• 1995-2000: LX; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1995-2000: SE; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1996-1997: Sport; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

• 1999-2000: SVT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN L"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With hydraulic lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1995-1997 Ford Contour submodels:

• 1995-1997: GL; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 1995-1997: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1996-1996: Sport; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1997-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters, variable valve timing; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1998-1999 Ford Contour submodels:

• 1998-1998: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 1998-1998: GL; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1998-1999: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1998-1999: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters, variable valve timing; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1998-1999 Ford Contour submodels:

• 1998-1998: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 1998-1998: GL; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1998-1999: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 1998-1999: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters, variable valve timing; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2000 Ford Contour submodels:

• 2000-2000: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 2000-2000: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters, variable valve timing; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2000 Ford Contour submodels:

• 2000-2000: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 2000-2000: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1995-2000 Ford Contour submodels:

• 1995-1995: GL Sport; All Engines;
• 1995-1995: LX Sport; All Engines;

• 1995-1998: GL; All Engines;

• 1995-2000: LX; All Engines;

• 1995-2000: SE; All Engines;

• 1996-1997: Sport; All Engines;

• 1997-1998: Base; All Engines;

Fits 5 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- A high quality, direct fit OEM replacement engine mount; Easy installation.

Fits the following 1995-1997 Ford Contour submodels:

• 1995-1995: GL Sport; 4 Cyl 2.0L; "GAS, FI, VIN 3"
• 1995-1995: GL Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1995: LX Sport; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 1995-1995: LX Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: GL; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 1995-1997: GL; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: LX; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 1995-1997: LX; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: SE; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1996-1996: Sport; 4 Cyl 2.0L; "BI-FUEL, FI, VIN Z"

• 1996-1996: Sport; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 1996-1997: GL; 4 Cyl 2.0L; "BI-FUEL, FI, VIN Z"

• 1996-1997: Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1997-1997: Base; 4 Cyl 2.0L; "GAS, FI, VIN 3"

Fits 12 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- A high quality, direct fit OEM replacement engine mount; Easy installation.

Fits the following 1995-1997 Ford Contour submodels:

• 1995-1995: GL Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"
• 1995-1995: LX Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: GL; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: LX; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1995-1997: SE; 6 Cyl 2.5L; "GAS, FI, VIN L"

• 1996-1997: Sport; 6 Cyl 2.5L; "GAS, FI, VIN L"

Fits 4 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1995-1997 Ford Contour submodels:

• 1995-1995: GL Sport; All Engines;
• 1995-1995: LX Sport; All Engines;

• 1995-1997: GL; All Engines;

• 1995-1997: LX; All Engines;

• 1995-1997: SE; All Engines;

• 1996-1997: Sport; All Engines;

• 1997-1997: Base; All Engines;

Fits 5 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1998-2000 Ford Contour submodels:

• 1998-1998: GL; All Engines;
• 1998-2000: LX; All Engines;

• 1998-2000: SE; All Engines;

• 1998-2000: SVT; All Engines;

Fits 2 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1998-2000 Ford Contour submodels:

• 1998-1998: Base; All Engines;
• 1998-1998: GL; All Engines;

• 1998-2000: LX; All Engines;

• 1998-2000: SE; All Engines;

Fits 2 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1998-2000 Ford Contour submodels:

• 1998-1998: Base; All Engines;
• 1998-1998: GL; All Engines;

• 1998-2000: LX; All Engines;

• 1998-2000: SE; All Engines;

Fits 2 more submodels. (Show all) Show less info