Ford Crown Victoria Engine Parts

1992 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF2810CW

Manufacturer Number: F2810C

zoom

List Price: $2,449.33
Our Price: $2,075.70
You Save: $373.63
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $525.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 2 bolts; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF28137CTW

Manufacturer Number: F28137CT

zoom

List Price: $1,616.87
Our Price: $1,370.23
You Save: $246.64
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $577.50

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 2 bolts; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Plus Long Block

Part Number: MEIF28138CT

Manufacturer Number: F28138CT

zoom

List Price: $2,607.27
Our Price: $2,209.55
You Save: $397.72
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 3 bolts; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Plus Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Plus Long Block

Part Number: MEIF28137CT

Manufacturer Number: F28137CT

zoom

List Price: $1,587.84
Our Price: $1,345.63
You Save: $242.21
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 2 bolts; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Plus Long Block
Condition:	Remanufactured

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF2810C

Manufacturer Number: F2810C

zoom

List Price: $2,408.12
Our Price: $2,040.78
You Save: $367.34
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $500.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 2 bolts; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF28138CTW

Manufacturer Number: F28138CT

zoom

List Price: $2,651.97
Our Price: $2,247.43
You Save: $404.54
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $577.50

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 3 bolts; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF2812CW

Manufacturer Number: F2812C

zoom

List Price: $1,616.26
Our Price: $1,369.71
You Save: $246.55
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $577.50

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 3 bolts; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1992 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF2812C

Manufacturer Number: F2812C

zoom

List Price: $1,587.63
Our Price: $1,345.45
You Save: $242.18
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, starter bolts onto block with 3 bolts; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1992 Ford Crown Victoria submodels:

1992-1992: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1992-1992: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF2813C

Manufacturer Number: F2813C

zoom

List Price: $1,694.36
Our Price: $1,435.90
You Save: $258.46
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, bicycle style timing chain; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF2813CW

Manufacturer Number: F2813C

zoom

List Price: $1,727.87
Our Price: $1,464.30
You Save: $263.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $577.50

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, bicycle style timing chain; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF28140CTW

Manufacturer Number: F28140CT

zoom

List Price: $2,651.97
Our Price: $2,247.43
You Save: $404.54
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $577.50

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block

Part Number: MEIF2811CW

Manufacturer Number: F2811C

zoom

List Price: $2,246.81
Our Price: $1,904.08
You Save: $342.73
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $525.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, mesh style timing chain; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF2811C

Manufacturer Number: F2811C

zoom

List Price: $2,207.77
Our Price: $1,870.99
You Save: $336.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $500.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve, mesh style timing chain; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1993-1995 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Plus Long Block

Part Number: MEIF28140CT

Manufacturer Number: F28140CT

zoom

List Price: $2,607.27
Our Price: $2,209.55
You Save: $397.72
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Plus Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1993-1995 Ford Crown Victoria submodels:

1993-1995: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1993-1995: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

1996-1997 Ford Crown Victoria - Marshall Engines Engine Long Block Premium Plus Long Block

Part Number: MEIF28141CT

Manufacturer Number: F28141CT

zoom

List Price: $2,607.27
Our Price: $2,209.55
You Save: $397.72
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $550.00

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 16-valve; Includes factory installed oil pump, screen, oil pan, timing cover and valve covers; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Plus Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1996-1997 Ford Crown Victoria submodels:

1996-1997: Base; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"
1996-1997: LX; 8 Cyl 4.6L; "Gas, FI, Naturally Aspirated, VIN W"

Shop by Vehicle

Shop by Brand

Shop by Category

Shop by Brand

Shop by Price

Shop by Condition

Shop by Finish

Shop by Material

Shop by Quantity Sold

Shop by Series

Shop by Type

Why shop with us?

Secure shopping

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1992 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1993-1995 Ford Crown Victoria submodels:

Fits the following 1996-1997 Ford Crown Victoria submodels:

Featured Models

Featured Makes

Payment options

Customer Service

Worry-free Shopping

Company Info

My Account