Ford Econoline Van Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1965-1967 Ford Econoline submodels:

• 1965-1967: Base; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1965-1967 Ford Econoline submodels:

• 1965-1967: Base; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1961-1967 Ford Econoline submodels:

• 1961-1964: Base; 6 Cyl 2.4L;
• 1962-1967: Base; 6 Cyl 2.8L;

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Includes premium valve stem seals; Does not include exhaust pipe flange and packing; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1961-1967 Ford Econoline submodels:

• 1961-1966: Base; 6 Cyl 2.4L; "GAS, CARB"
• 1962-1967: Base; 6 Cyl 2.8L; "GAS, CARB"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1967 Ford Econoline submodels:

• 1967-1967: Base; 6 Cyl 3.9L; "GAS, CARB"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1967 Ford Econoline submodels:

• 1967-1967: Base; 6 Cyl 3.9L;

FELPRO PERMATORQUE FULL GASKET SET -- Contains head gasket, intake gasket, oil pan gasket, rear main seal, exhaust manifold gasket, valve cover gasket, water pump gasket, timing cover gasket, timing cover seal, water neck gasket, fuel pump gasket, and distributor gasket; Includes premium valve stem seals; An all inclusive set for a complete engine overhaul; Intended for upper and lower engine work combined; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1967 Ford Econoline submodels:

• 1967-1967: Base; 6 Cyl 3.9L; "GAS, CARB"

FLEXALITE ENGINE OIL COOLER KIT -- 5 in. height, 20 in. width, 3/4 in. depth; Comes with Flexalite's proprietary sandwich adapters; Complete with all hardware and easy-to-follow instructions in English, French and Spanish; Designed for moderate or auxiliary engine oil cooling applications on vehicles with spin-on filters; Supplied standard with 1/2 in. billet barbed fittings that offer more secure hose connections; With Flexalite's limited 1-year warranty.

Fits the following 1963-1967 Ford Econoline submodels:

• 1963-1967: Base; 6 Cyl 2.8L;
• 1965-1967: Base; 6 Cyl 3.9L;

FLEXALITE ENGINE OIL COOLER KIT -- 7 in. Height, 21 in. Width, 1 1/2 in. Depth, Designed For High-Demand Engine Oil Cooling Applications On Vehicles With Spin-On Filters, Supplied Standard With 5/8 in. Billet Barbed Fittings That Offer More Secure Hose Connections, Comes With Flexalite's Proprietary Sandwich Adapters, Complete With All Hardware And Easy-To-Follow Instructions In English, French, And Spanish, With Flexalite's 1-Year Limited Warranty

Fits the following 1963-1967 Ford Econoline submodels:

• 1963-1967: Base; 6 Cyl 2.8L;
• 1965-1967: Base; 6 Cyl 3.9L;

FLEXALITE OIL COOLER SANDWICH ADAPTER KIT -- 3/4-16 Thread Size, 1.5 Thickness, 2-1/2" O-Ring, Features New Proprietary Design In Light Weight, Matte Finish With Machined Mating Surfaces, Permits The Installation Of An Engine Oil Cooler Without Relocating The Oil Filter, With Manufacturer's Limited 1-Year Warranty

Fits the following 1963-1967 Ford Econoline submodels:

• 1963-1966: Base; 6 Cyl 2.4L;
• 1963-1967: Base; 6 Cyl 2.8L;

• 1965-1967: Base; 6 Cyl 3.9L;

Fits 1 more submodels. (Show all) Show less info