Ford Escape Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Without variable timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2004: XLS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"
• 2001-2004: XLT; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"

• 2003-2004: Limited; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Without variable timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2004: XLS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"
• 2001-2004: XLT; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"

• 2003-2004: Limited; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN B"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number XW4W, right head cast number YF1E, left head cast YL8E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2001-2003 Ford Escape submodels:

• 2001-2003: XLS; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"
• 2001-2003: XLT; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"

• 2003-2003: Limited; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number XW4W, right head cast number YF1E, left head cast YL8E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2001-2003 Ford Escape submodels:

• 2001-2003: XLS; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"
• 2001-2003: XLT; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"

• 2003-2003: Limited; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN 1"

Fits 1 more submodels. (Show all) Show less info

ENGINE SPLASH SHIELD, PLASTIC -- A high quality, direct fit OE replacement engine splash shield; Covered by a 1-year unlimited mileage warranty.

Fits the following 2008-2009 Ford Escape submodels:

• 2008-2008: Hybrid; 4 Cyl 2.3L;
• 2008-2008: XLS; 4 Cyl 2.3L;

• 2008-2008: XLT; 4 Cyl 2.3L;

• 2008-2009: Limited; 6 Cyl 3.0L;

• 2008-2009: XLT; 6 Cyl 3.0L;

• 2009-2009: Hybrid; 4 Cyl 2.5L;

• 2009-2009: Limited Hybrid; 4 Cyl 2.5L;

• 2009-2009: XLS; 4 Cyl 2.5L;

• 2009-2009: XLT; 4 Cyl 2.5L;

Fits 7 more submodels. (Show all) Show less info

ENGINE SPLASH SHIELD, PLASTIC -- A high quality, direct fit OE replacement engine splash shield; Covered by a 1-year unlimited mileage warranty.

Fits the following 2008-2009 Ford Escape submodels:

• 2008-2008: Hybrid; 4 Cyl 2.3L;
• 2008-2008: XLS; 4 Cyl 2.3L;

• 2008-2008: XLT; 4 Cyl 2.3L;

• 2008-2009: Limited; 6 Cyl 3.0L;

• 2008-2009: XLT; 6 Cyl 3.0L;

• 2009-2009: Hybrid; 4 Cyl 2.5L;

• 2009-2009: Limited Hybrid; 4 Cyl 2.5L;

• 2009-2009: XLS; 4 Cyl 2.5L;

• 2009-2009: XLT; 4 Cyl 2.5L;

Fits 7 more submodels. (Show all) Show less info

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2001: XLT; 4 Cyl 2.0L;
• 2001-2004: XLS; 4 Cyl 2.0L;

• 2001-2004: XLS; 6 Cyl 3.0L;

• 2001-2004: XLT; 6 Cyl 3.0L;

• 2003-2004: Limited; 6 Cyl 3.0L;

Fits 3 more submodels. (Show all) Show less info

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2001: XLT; 4 Cyl 2.0L;
• 2001-2004: XLS; 4 Cyl 2.0L;

• 2001-2004: XLS; 6 Cyl 3.0L;

• 2001-2004: XLT; 6 Cyl 3.0L;

• 2003-2004: Limited; 6 Cyl 3.0L;

Fits 3 more submodels. (Show all) Show less info

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2001: XLT; 4 Cyl 2.0L;
• 2001-2004: XLS; 4 Cyl 2.0L;

• 2004-2004: Limited; 6 Cyl 3.0L;

• 2004-2004: XLS; 6 Cyl 3.0L;

• 2004-2004: XLT; 6 Cyl 3.0L;

Fits 3 more submodels. (Show all) Show less info

Fits the following 2001-2003 Ford Escape submodels:

• 2001-2003: XLS; 4 Cyl 2.0L;
• 2001-2003: XLS; 6 Cyl 3.0L;

• 2001-2003: XLT; 4 Cyl 2.0L;

• 2001-2003: XLT; 6 Cyl 3.0L;

• 2003-2003: Limited; 4 Cyl 2.0L;

• 2003-2003: Limited; 6 Cyl 3.0L;

Fits 4 more submodels. (Show all) Show less info

Fits the following 2001-2004 Ford Escape submodels:

• 2001-2001: All Submodels; All Engines;
• 2002-2002: XLS; All Engines;

• 2003-2004: XLS; 4 Cyl 2.0L;

• 2004-2004: Limited; 4 Cyl 2.0L;

• 2004-2004: Limited; 6 Cyl 3.0L;

• 2004-2004: XLS; 6 Cyl 3.0L;

• 2004-2004: XLT; 4 Cyl 2.0L;

• 2004-2004: XLT; 6 Cyl 3.0L;

Fits 6 more submodels. (Show all) Show less info

Fits the following 2001-2003 Ford Escape submodels:

• 2001-2003: XLS; 4 Cyl 2.0L;
• 2001-2003: XLS; 6 Cyl 3.0L;

• 2001-2003: XLT; 4 Cyl 2.0L;

• 2001-2003: XLT; 6 Cyl 3.0L;

• 2003-2003: Limited; 4 Cyl 2.0L;

• 2003-2003: Limited; 6 Cyl 3.0L;

Fits 4 more submodels. (Show all) Show less info

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 2001-2003 Ford Escape submodels:

• 2001-2003: XLS; 6 Cyl 3.0L; "GAS, FI, VIN 1"
• 2001-2003: XLT; 6 Cyl 3.0L; "GAS, FI, VIN 1"

• 2003-2003: Limited; 6 Cyl 3.0L; "GAS, FI, VIN 1"

Fits 1 more submodels. (Show all) Show less info

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket, and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; A high quality, direct fit OE replacement conversion gasket set; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 2005-2007 Ford Escape submodels:

• 2005-2005: Hybrid; 4 Cyl 2.3L; "ELECTRIC/GAS, FI"
• 2005-2005: XLT No Boundaries; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2005-2007: XLS; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2005-2007: XLT; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2006-2007: Hybrid; 4 Cyl 2.3L; "ELECTRIC/GAS, FI, VIN H"

Fits 3 more submodels. (Show all) Show less info

ENGINE LONG BLOCK, REMANUFACTURED -- OHC; Includes gasket kit and oil pump; Cylinder block: Magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color, each cylinder is honed with the specified cross-hatch pattern after the block is bored, decked and chamfered; Crankshaft: Machined on a fully-automated crank grinder for consistency and critical tolerances, given a final wash for cleanliness, all oil galley holes are chamfered and brushed after machining; Connecting rods: Measured against stringent specifications for bend, twist, and center-to-center length, the piston pin bore and bearing bore are measured with air gauges for proper dimensions, installed with new torque-to-yield rod bolts and nuts; Cylinder heads: Resurfaced and completely inspected for any visible damage or cracks, valve seats are machined, inspected and replaced if necessary, valve guides are inspected with an air gauge and replaced if necessary, cam bore is checked and machined if required, used with brand new valves, seals and lifters, all plugs and fittings are replaced with new pieces to protect against possible coolant leaks; This engine is spin tested to ensure proper oil flow, pressure, torque and compression; All sealed units are tested for oil and coolant leaks; With 36-month/100,000 miles warranty when installed in passenger cars, police cars and light trucks.

Fits the following 2005 Ford Escape submodels:

• 2005-2005: Hybrid; 4 Cyl 2.3L;
• 2005-2005: XLS; 4 Cyl 2.3L;

• 2005-2005: XLT No Boundaries; 4 Cyl 2.3L;

• 2005-2005: XLT; 4 Cyl 2.3L;

Fits 2 more submodels. (Show all) Show less info