Ford F-150 Engine Parts | Free Shipping | 1975 - 1976, 1997

1975-1976 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3900CW

Manufacturer Number: F3900C

zoom

List Price: $1,922.33
Our Price: $1,629.09
You Save: $293.24
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $376.25

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1975-1976 Ford F-150 submodels:

1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN M"

1997-1998 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF2560CW

Manufacturer Number: F2560C

zoom

List Price: $1,931.13
Our Price: $1,636.55
You Save: $294.58
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $525.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, roller; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Verify casting number on oil pan, first part of the casting number on the oil pan should be F65E, 4x2 or 4x4, however, if the casting number is F7ZE, XL3E, or 3L3E see F2562C or F2563C; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1997-1998 Ford F-150 submodels:

1997-1998: Base; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN 2"
1997-1998: XL; 6 Cyl 4.2L; "Gas, FI, Naturally Aspirated, VIN 2"

1997-2000 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3308CW

Manufacturer Number: F3308C

zoom

List Price: $2,720.45
Our Price: $2,305.47
You Save: $414.98
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $735.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, non-power improved, head cast number F65E, F75E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Must verify the head casting number for 1999 - 2000 model year trucks, vans, and SUV's, casting number is located between the valve cover and exhaust manifold on he side of the head; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1997-2000 Ford F-150 submodels:

1997-2000: Base; 8 Cyl 5.4L; "Gas, FI, Naturally Aspirated, VIN L"
1997-2000: Lariat; 8 Cyl 5.4L; "Gas, FI, Naturally Aspirated, VIN L"

1999-2001 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3309CW

Manufacturer Number: F3309C

zoom

List Price: $2,720.45
Our Price: $2,305.47
You Save: $414.98
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $735.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, power improved, head cast number XL3E, 2L1E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Must verify the head casting number for 1999 - 2000 model year trucks, vans, and SUV's, casting number is located between the valve cover and exhaust manifold on the side of the head; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1999-2001 Ford F-150 submodels:

1999-2000: Base; 8 Cyl 5.4L; "Gas, FI, Naturally Aspirated, VIN L"
1999-2001: Lariat; 8 Cyl 5.4L; "Gas, FI, Naturally Aspirated, VIN L"

1975-1976 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3901C

Manufacturer Number: F3901C

zoom

List Price: $1,888.67
Our Price: $1,600.57
You Save: $288.10
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $350.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Truck
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1975-1976 Ford F-150 submodels:

1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN M"

1975-1976 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3901CW

Manufacturer Number: F3901C

zoom

List Price: $1,922.33
Our Price: $1,629.09
You Save: $293.24
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $376.25

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1975-1976 Ford F-150 submodels:

1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN M"

1975-1976 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3900C

Manufacturer Number: F3900C

zoom

List Price: $1,888.67
Our Price: $1,600.57
You Save: $288.10
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $350.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1975-1976 Ford F-150 submodels:

1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1975-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN M"

1975-1982 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3000C

Manufacturer Number: F3000C

zoom

List Price: $1,491.39
Our Price: $1,263.89
You Save: $227.50
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $210.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1975-1982 Ford F-150 submodels:

1975-1978: Northland; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1975-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"

1975-1984 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3001CW

Manufacturer Number: F3001C

zoom

List Price: $1,518.71
Our Price: $1,287.04
You Save: $231.67
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $231.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1975-1984 Ford F-150 submodels:

1975-1978: Northland; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1975-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"

1975-1984 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3001C

Manufacturer Number: F3001C

zoom

List Price: $1,491.39
Our Price: $1,263.89
You Save: $227.50
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $210.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1975-1984 Ford F-150 submodels:

1975-1978: Northland; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1975-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"

1975-1976 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF2400CW

Manufacturer Number: F2400C

zoom

List Price: $1,475.96
Our Price: $1,250.81
You Save: $225.15
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $330.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1975-1976 Ford F-150 submodels:

1975-1975: Custom; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated, VIN A"
1975-1975: Northland; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated, VIN A"

1975-1976 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF2400C

Manufacturer Number: F2400C

zoom

List Price: $1,449.50
Our Price: $1,228.39
You Save: $221.11
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Truck
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1975-1976 Ford F-150 submodels:

1975-1975: Custom; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated, VIN A"
1975-1975: Northland; 6 Cyl 3.9L; "Gas, CARB, Naturally Aspirated, VIN A"

1975-1982 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3000CW

Manufacturer Number: F3000C

zoom

List Price: $1,518.71
Our Price: $1,287.04
You Save: $231.67
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $231.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1975-1982 Ford F-150 submodels:

1975-1978: Northland; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1975-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"

1976 Ford F-150 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3911C

Manufacturer Number: F3911C

zoom

List Price: $2,063.18
Our Price: $1,748.46
You Save: $314.72
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $650.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emission holes in head, heads have intake and exhaust cross-over, front crankshaft bolt 3/4 in. x 16; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Truck
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1976 Ford F-150 submodels:

1976-1976: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1976-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"

1976 Ford F-150 - Marshall Engines Engine Long Block

Part Number: MEIF3911CW

Manufacturer Number: F3911C

zoom

List Price: $2,099.49
Our Price: $1,779.23
You Save: $320.26
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $682.50

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emission holes in head, heads have intake and exhaust cross-over, front crankshaft bolt 3/4 in. x 16; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1976 Ford F-150 submodels:

1976-1976: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"
1976-1976: Custom; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN H"

Shop by Vehicle

Shop by Brand

Shop by Category

Shop by Brand

Shop by Price

Shop by Condition

Shop by Finish

Shop by Material

Shop by Quantity Sold

Shop by Series

Shop by Type

Why shop with us?

Secure shopping

Ford F150 Pickup Engine Parts

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1997-1998 Ford F-150 submodels:

Fits the following 1997-2000 Ford F-150 submodels:

Fits the following 1999-2001 Ford F-150 submodels:

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1975-1982 Ford F-150 submodels:

Fits the following 1975-1984 Ford F-150 submodels:

Fits the following 1975-1984 Ford F-150 submodels:

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1975-1976 Ford F-150 submodels:

Fits the following 1975-1982 Ford F-150 submodels:

Fits the following 1976 Ford F-150 submodels:

Fits the following 1976 Ford F-150 submodels:

Featured Models

Featured Makes

Payment options

Customer Service

Worry-free Shopping

Company Info

My Account