Ford F-350 Engine Parts | Free Shipping | 1979 - 1980, 1977

1979-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3000C

Manufacturer Number: F3000C

zoom

List Price: $1,491.39
Our Price: $1,263.89
You Save: $227.50
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $210.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN K"

1979-1980 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF3001CW

Manufacturer Number: F3001C

zoom

List Price: $1,518.71
Our Price: $1,287.04
You Save: $231.67
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $231.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN K"

1979-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3001C

Manufacturer Number: F3001C

zoom

List Price: $1,491.39
Our Price: $1,263.89
You Save: $227.50
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $210.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN K"

1979-1980 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF3000CW

Manufacturer Number: F3000C

zoom

List Price: $1,518.71
Our Price: $1,287.04
You Save: $231.67
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $231.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, stud mounted rocker arms, dipstick presses into block; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN B"
1979-1979: Custom; 6 Cyl 4.9L; "Gas, CARB, Naturally Aspirated, VIN K"

1977-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF4000C

Manufacturer Number: F4000C

zoom

List Price: $1,515.00
Our Price: $1,283.90
You Save: $231.10
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $200.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1977-1980 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 6.6L; "Gas, CARB, Naturally Aspirated, VIN S"
1977-1977: XLT; 8 Cyl 6.6L; "Gas, CARB, Naturally Aspirated, VIN Z"

1977-1980 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF4000CW

Manufacturer Number: F4000C

zoom

List Price: $1,542.45
Our Price: $1,307.16
You Save: $235.29
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $220.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1977-1980 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 6.6L; "Gas, CARB, Naturally Aspirated, VIN S"
1977-1977: XLT; 8 Cyl 6.6L; "Gas, CARB, Naturally Aspirated, VIN Z"

1977-1978 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF4600C

Manufacturer Number: F4600C

zoom

List Price: $1,691.19
Our Price: $1,433.21
You Save: $257.98
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $350.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, uses non-weighted crankshaft damper spacer; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1977-1978 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"
1977-1978: Base; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"

1977-1978 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF4601C

Manufacturer Number: F4601C

zoom

List Price: $1,762.40
Our Price: $1,493.56
You Save: $268.84
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $275.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, uses non-weighted crankshaft damper spacer; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1977-1978 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"
1977-1978: Base; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"

1977-1978 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF4601CW

Manufacturer Number: F4601C

zoom

List Price: $1,793.56
Our Price: $1,519.97
You Save: $273.59
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $302.50

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, uses non-weighted crankshaft damper spacer; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1977-1978 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"
1977-1978: Base; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"

1977-1978 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF4600CW

Manufacturer Number: F4600C

zoom

List Price: $1,721.71
Our Price: $1,459.08
You Save: $262.63
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $376.25

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, uses non-weighted crankshaft damper spacer; Comes complete with adjusted valve train components, gasket set and new oil pump; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1977-1978 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"
1977-1978: Base; 8 Cyl 7.5L; "Gas, CARB, Naturally Aspirated, VIN J"

1977-1980 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF3514CW

Manufacturer Number: F3514C

zoom

List Price: $1,573.49
Our Price: $1,333.47
You Save: $240.02
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $275.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, modified engine, dipstick goes in front of engine; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1977-1980 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"
1977-1978: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"

1977-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3514C

Manufacturer Number: F3514C

zoom

List Price: $1,545.79
Our Price: $1,309.99
You Save: $235.80
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $250.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, modified engine, dipstick goes in front of engine; Comes complete with adjusted valve train components, gasket set and new oil pump; With emissions equipment; Not Supplied with valley pan gasket; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1977-1980 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"
1977-1978: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"

1977-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3512C

Manufacturer Number: F3512C

zoom

List Price: $1,500.63
Our Price: $1,271.72
You Save: $228.91
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $300.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, Windsor engine, flat tappet, with emissions, without dipstick hole in block; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Verify that the distributor gear is in good condition or replace with new gear. valley pan gasket not supplied for vehicles over 8,500 GVW; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1977-1980 Ford F-350 submodels:

1977-1977: XLT; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"
1977-1978: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated, VIN H"

1979-1980 Ford F-350 - Marshall Engines Engine Long Block

Part Number: MEIF3025CW

Manufacturer Number: F3025C

zoom

List Price: $1,201.68
Our Price: $1,018.37
You Save: $183.31
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $302.50

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, flat tappet, with emission holes in rear of heads, dipstick hole in left rear of block, crank cast number 2MAD, 2MA, 2M; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	Extended Cab Pickup, Truck
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 8 Cyl 5.0L; "Gas, CARB, Naturally Aspirated, VIN G"
1979-1979: Ranger Lariat; 8 Cyl 5.0L; "Gas, CARB, Naturally Aspirated, VIN G"

1979-1980 Ford F-350 - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIF3025C

Manufacturer Number: F3025C

zoom

List Price: $1,177.16
Our Price: $997.59
You Save: $179.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $275.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, flat tappet, with emission holes in rear of heads, dipstick hole in left rear of block, crank cast number 2MAD, 2MA, 2M; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	Extended Cab Pickup, Truck
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1979-1980 Ford F-350 submodels:

1979-1979: Custom; 8 Cyl 5.0L; "Gas, CARB, Naturally Aspirated, VIN G"
1979-1979: Ranger Lariat; 8 Cyl 5.0L; "Gas, CARB, Naturally Aspirated, VIN G"

Shop by Vehicle

Shop by Brand

Shop by Category

Shop by Brand

Shop by Price

Shop by Condition

Shop by Finish

Shop by Material

Shop by Quantity Sold

Shop by Series

Shop by Type

Why shop with us?

Secure shopping

Ford F350 Pickup Engine Parts

Fits the following 1979-1980 Ford F-350 submodels:

Fits the following 1979-1980 Ford F-350 submodels:

Fits the following 1979-1980 Ford F-350 submodels:

Fits the following 1979-1980 Ford F-350 submodels:

Fits the following 1977-1980 Ford F-350 submodels:

Fits the following 1977-1980 Ford F-350 submodels:

Fits the following 1977-1978 Ford F-350 submodels:

Fits the following 1977-1978 Ford F-350 submodels:

Fits the following 1977-1978 Ford F-350 submodels:

Fits the following 1977-1978 Ford F-350 submodels:

Fits the following 1977-1980 Ford F-350 submodels:

Fits the following 1977-1980 Ford F-350 submodels:

Fits the following 1977-1980 Ford F-350 submodels:

Fits the following 1979-1980 Ford F-350 submodels:

Fits the following 1979-1980 Ford F-350 submodels:

Featured Models

Featured Makes

Payment options

Customer Service

Worry-free Shopping

Company Info

My Account