Ford Fairlane Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1964-1970 Ford Fairlane submodels:

• 1964-1967: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500XL; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1969: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1968-1970: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number ECZ, ECK, EDB; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1956-1962 Ford Fairlane submodels:

• 1956-1962: Base; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"
• 1957-1961: 500; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number ECZ, ECK, EDB; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1956-1962 Ford Fairlane submodels:

• 1956-1962: Base; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"
• 1957-1961: 500; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Solid lifter camshaft, shaft mounted rockers; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1957 Ford Fairlane submodels:

• 1957-1957: Base; 8 Cyl 5.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Solid lifter camshaft, shaft mounted rockers; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1957 Ford Fairlane submodels:

• 1957-1957: Base; 8 Cyl 5.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 8 bolt exhaust, block number C1AE, C2AE, C3AE, C4AE, C5AE, C6AE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1958-1966 Ford Fairlane submodels:

• 1958-1966: 500; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"
• 1959-1963: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

• 1966-1966: 500XL; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 8 bolt exhaust, block number C1AE, C2AE, C3AE, C4AE, C5AE, C6AE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1958-1966 Ford Fairlane submodels:

• 1958-1966: 500; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"
• 1959-1963: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

• 1966-1966: 500XL; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1964-1970 Ford Fairlane submodels:

• 1964-1967: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500XL; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1969: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1968-1970: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1964-1970 Ford Fairlane submodels:

• 1964-1967: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500XL; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1969: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1968-1970: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1964-1970 Ford Fairlane submodels:

• 1964-1967: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"
• 1964-1967: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500XL; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated"

• 1968-1968: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"

• 1968-1969: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1968-1970: 500; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number C5AE, C6AE, head number C8AE; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1964-1969 Ford Fairlane submodels:

• 1964-1964: Base; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated"
• 1969-1969: 500; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated, VIN Q"

• 1969-1969: Base; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated, VIN Q"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number C5AE, C6AE, head number C8AE; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1964-1969 Ford Fairlane submodels:

• 1964-1964: Base; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated"
• 1969-1969: 500; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated, VIN Q"

• 1969-1969: Base; 8 Cyl 7.0L; "Gas, CARB, Naturally Aspirated, VIN Q"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number C4AE, 5 bolt bellhousing; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1963-1965 Ford Fairlane submodels:

• 1963-1965: 500; 8 Cyl 4.7L; "Gas, CARB, Naturally Aspirated"
• 1963-1965: Base; 8 Cyl 4.7L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block casting number C6DE, C5DE, without emissions in head; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1964-1967 Ford Fairlane submodels:

• 1964-1967: Base; 6 Cyl 3.3L; "Gas, CARB, Naturally Aspirated"
• 1965-1967: 500; 6 Cyl 3.3L; "Gas, CARB, Naturally Aspirated"

• 1966-1967: 500XL; 6 Cyl 3.3L; "Gas, CARB, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number C4AE, 5 bolt bellhousing; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1963-1965 Ford Fairlane submodels:

• 1963-1965: 500; 8 Cyl 4.7L; "Gas, CARB, Naturally Aspirated"
• 1963-1965: Base; 8 Cyl 4.7L; "Gas, CARB, Naturally Aspirated"