Ford Focus Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, head cast number YS4E; Comes complete with adjusted valve train components, gasket set and new oil pump; Without breather hole in left-hand side of block and 4 motor mount holes right-hand front of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2000 Ford Focus submodels:

• 2000-2000: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"
• 2000-2000: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, head cast number YS4E, 4 motor mount holes right-hand front of block; Comes complete with adjusted valve train components, gasket set and new oil pump; Without breather hole in left-hand side of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2001-2004 Ford Focus submodels:

• 2001-2003: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"
• 2001-2004: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Without variable timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2000-2004 Ford Focus submodels:

• 2000-2004: ZTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 2000-2004: ZX3; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2002: S2; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2002: Street; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2004: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2002-2003: ZTW; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2002-2004: ZX5; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve; With mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; Without variable timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2000-2004 Ford Focus submodels:

• 2000-2004: ZTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"
• 2000-2004: ZX3; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2002: S2; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2002: Street; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2001-2004: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2002-2003: ZTW; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

• 2002-2004: ZX5; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN 3"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, head cast number YS4E; Comes complete with adjusted valve train components, gasket set and new oil pump; Without breather hole in left-hand side of block and 4 motor mount holes right-hand front of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2000 Ford Focus submodels:

• 2000-2000: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"
• 2000-2000: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, head cast number YS4E, 4 motor mount holes right-hand front of block; Comes complete with adjusted valve train components, gasket set and new oil pump; Without breather hole in left-hand side of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2001-2004 Ford Focus submodels:

• 2001-2003: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"
• 2001-2004: LX; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN P"

WESTAR ENGINE MOUNT -- A high quality, direct fit OE replacement engine mount; Easy installation.

Fits the following 2000-2004 Ford Focus submodels:

• 2000-2000: Sony Limited Edition; 4 Cyl 2.0L; "GAS, FI"
• 2000-2004: LX; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 2000-2004: SE; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 2000-2004: ZTS; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2000-2004: ZX3; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2001-2002: S2; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2001-2002: Street; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2002-2003: ZTW; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2002-2004: SVT; 4 Cyl 2.0L; "GAS, FI, VIN 5"

• 2002-2004: ZX5; 4 Cyl 2.0L; "GAS, FI, VIN 3"

Fits 8 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- A high quality, direct fit OE replacement engine mount; Easy installation.

Fits the following 2000-2003 Ford Focus submodels:

• 2000-2003: LX; All Engines;
• 2000-2003: SE; All Engines;

• 2000-2003: ZTS; All Engines;

• 2000-2003: ZX3; All Engines;

• 2001-2002: S2; All Engines;

• 2001-2002: Street; All Engines;

• 2002-2003: SVT; All Engines;

• 2002-2003: ZTW; All Engines;

• 2002-2003: ZX5; All Engines;

Fits 7 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 2000-2003 Ford Focus submodels:

• 2000-2003: LX; All Engines;
• 2000-2003: SE; All Engines;

• 2000-2003: ZTS; All Engines;

• 2000-2003: ZX3; All Engines;

• 2001-2002: S2; All Engines;

• 2001-2002: Street; All Engines;

• 2002-2003: SVT; All Engines;

• 2002-2003: ZTW; All Engines;

• 2002-2003: ZX5; All Engines;

Fits 7 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- A high quality, direct fit OE replacement engine mount; Easy installation.

Fits the following 2000-2003 Ford Focus submodels:

• 2000-2000: Sony Limited Edition; 4 Cyl 2.0L; "GAS, FI, VIN P"
• 2000-2003: LX; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 2000-2003: SE; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 2000-2003: ZTS; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2000-2003: ZX3; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2001-2002: S2; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2001-2002: Street; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2002-2003: SVT; 4 Cyl 2.0L; "GAS, FI, VIN 5"

• 2002-2003: ZTW; 4 Cyl 2.0L; "GAS, FI, VIN 3"

• 2002-2003: ZX5; 4 Cyl 2.0L; "GAS, FI, VIN 3"

Fits 8 more submodels. (Show all) Show less info

ENGINE SPLASH SHIELD, LOWER -- A High Quality, Direct Fit OE Replacement Engine Splash Shield; Covered by a 1-year unlimited mileage warranty.

Fits the following 2000-2004 Ford Focus submodels:

• 2000-2000: Sony Limited Edition; 4 Cyl 2.0L;
• 2000-2004: LX; 4 Cyl 2.0L;

• 2000-2004: SE; 4 Cyl 2.0L;

• 2000-2004: ZTS; 4 Cyl 2.0L;

• 2000-2004: ZX3; 4 Cyl 2.0L;

• 2001-2002: S2; 4 Cyl 2.0L;

• 2001-2002: Street; 4 Cyl 2.0L;

• 2002-2003: ZTW; 4 Cyl 2.0L;

• 2002-2004: SVT; 4 Cyl 2.0L;

• 2002-2004: ZX5; 4 Cyl 2.0L;

• 2003-2004: LX; 4 Cyl 2.3L;

• 2003-2004: SE; 4 Cyl 2.3L;

• 2003-2004: ZTS; 4 Cyl 2.3L;

• 2003-2004: ZTW; 4 Cyl 2.3L;

• 2003-2004: ZX3; 4 Cyl 2.3L;

• 2003-2004: ZX5; 4 Cyl 2.3L;

Fits 14 more submodels. (Show all) Show less info

ENGINE SPLASH SHIELD, PLASTIC -- A high quality, direct fit OE replacement engine splash shield; Covered by a 1-year unlimited mileage warranty.

Fits the following 2005-2006 Ford Focus submodels:

• 2005-2006: ZX3; 4 Cyl 2.0L;
• 2005-2006: ZX4 ST; 4 Cyl 2.3L;

• 2005-2006: ZX4; 4 Cyl 2.0L;

• 2005-2006: ZX5; 4 Cyl 2.0L;

• 2005-2006: ZXW; 4 Cyl 2.0L;

Fits 3 more submodels. (Show all) Show less info

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 2000-2004 Ford Focus submodels:

• 2000-2003: SE; 4 Cyl 2.0L; "GAS, FI, VIN P"
• 2000-2004: LX; 4 Cyl 2.0L; "GAS, FI, VIN P"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket, and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; A high quality, direct fit OE replacement conversion gasket set; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 2003-2007 Ford Focus submodels:

• 2003-2004: LX; 4 Cyl 2.3L; "GAS, FI, VIN Z"
• 2003-2004: SE; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2003-2004: ZTS; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2003-2004: ZTW; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2003-2004: ZX3; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2003-2004: ZX5; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2005-2006: ZX3; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2005-2006: ZX4 ST; 4 Cyl 2.3L; "GAS, FI, VIN Z"

• 2005-2006: ZX4; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2005-2006: ZX5; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2005-2006: ZXW; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2007-2007: S; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2007-2007: SE; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2007-2007: SES; 4 Cyl 2.0L; "GAS, FI, VIN N"

• 2007-2007: ST; 4 Cyl 2.3L; "GAS, FI, VIN Z"

Fits 13 more submodels. (Show all) Show less info

ENERGY SUSPENSION POLYURETHANE MOTOR MOUNT, BLACK -- Made Of Unique And Technically Advanced Chemical Formulation Called Hyper-Flex, Designed For Soft Running That Is Enough To Absorb Vibrations For Street Use Yet Rugged For Racing Use, Replaces The Original And Short Lived Rubber Mounts, Outdates The Hard Running Metal Motor Mounts, Resistant To Under Vehicle Fluids Such As Oils, Coolants And Road Contaminants, With Manufacturer's Limited 2 Years Warranty

Fits the following 2000-2002 Ford Focus submodels:

• 2000-2000: Sony Limited Edition; 4 Cyl 2.0L; "GAS, FI"
• 2000-2002: LX; 4 Cyl 2.0L; "GAS, FI"

• 2000-2002: SE; 4 Cyl 2.0L; "GAS, FI"

• 2000-2002: ZTS; 4 Cyl 2.0L; "GAS, FI"

• 2000-2002: ZX3; 4 Cyl 2.0L; "GAS, FI"

• 2001-2002: S2; 4 Cyl 2.0L; "GAS, FI"

• 2001-2002: Street; 4 Cyl 2.0L; "GAS, FI"

• 2002-2002: SVT; 4 Cyl 2.0L; "GAS, FI"

• 2002-2002: ZTW; 4 Cyl 2.0L; "GAS, FI"

• 2002-2002: ZX5; 4 Cyl 2.0L; "GAS, FI"

Fits 8 more submodels. (Show all) Show less info