Ford Probe Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, FWD, flat tappet; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1990-1992 Ford Probe submodels:

• 1990-1992: LX; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, FWD, flat tappet; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1990-1992 Ford Probe submodels:

• 1990-1992: LX; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number KL, aluminum 2-piece block, aluminum head, oval intake ports, 32 mm water pump pulley pilot; With crank sensor and water pump; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1993-1997 Ford Probe submodels:

• 1993-1997: GT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN B"

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number KL, aluminum 2-piece block, aluminum head, oval intake ports, 32 mm water pump pulley pilot; With crank sensor and water pump; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1993-1997 Ford Probe submodels:

• 1993-1997: GT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN B"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number KL, aluminum 2-piece block, aluminum head, oval intake ports, 32 mm water pump pulley pilot; With crank sensor and water pump; Comes complete with adjusted valve train components, gasket set and new oil pump; Without cam sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1993-1997 Ford Probe submodels:

• 1993-1997: GT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN B"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, block cast number KL, aluminum 2-piece block, aluminum head, oval intake ports, 32 mm water pump pulley pilot; With crank sensor and water pump; Comes complete with adjusted valve train components, gasket set and new oil pump; Without cam sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1993-1997 Ford Probe submodels:

• 1993-1997: GT; 6 Cyl 2.5L; "Gas, FI, Naturally Aspirated, VIN B"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 12-valve, F2 engine family; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1989-1992 Ford Probe submodels:

• 1989-1989: LX; All Engines;
• 1989-1992: GL; All Engines;

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 12-valve, F2 engine family; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1989-1992 Ford Probe submodels:

• 1989-1989: LX; All Engines;
• 1989-1992: GL; All Engines;

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, hydraulic lifters, distributor drive left-hand rear of head; Without knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1993-1995 Ford Probe submodels:

• 1993-1995: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1993-1995: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, hydraulic lifters, distributor drive left-hand rear of head; Without knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1993-1995 Ford Probe submodels:

• 1993-1995: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1993-1995: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, hydraulic bucket lifters, has distributor drive left-hand rear of head; With knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1995-1997 Ford Probe submodels:

• 1995-1996: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1995-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

• 1997-1997: GTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, hydraulic bucket lifters, has distributor drive left-hand rear of head; With knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1995-1997 Ford Probe submodels:

• 1995-1996: SE; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1995-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

• 1997-1997: GTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, solid bucket lifters, distributorless ignition; With knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1997 Ford Probe submodels:

• 1997-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1997-1997: GTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, FI, block cast number FS, head cast number FS2, cast block, aluminum head, solid bucket lifters, distributorless ignition; With knock sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1997 Ford Probe submodels:

• 1997-1997: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"
• 1997-1997: GTS; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN A"

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1989-1992 Ford Probe submodels:

• 1989-1989: LX; All Engines;
• 1989-1992: GL; All Engines;

• 1990-1992: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info