Ford Ranger Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, D-shaped intake ports, grooved rear main cap, head number E1BE, E4DE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1983-1984 Ford Ranger submodels:

• 1983-1983: Base; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"
• 1983-1984: XL; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1983-1984: XLS; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1983-1984: XLT; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1984-1984: S; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, D-shaped intake ports, grooved rear main cap, head number E1BE, E4DE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1983-1984 Ford Ranger submodels:

• 1983-1983: Base; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"
• 1983-1984: XL; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1983-1984: XLS; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1983-1984: XLT; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

• 1984-1984: S; 4 Cyl 2.3L; "Gas, CARB, Turbocharged, VIN A"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, grooved rear main cap, 4 piece oil pan gasket; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1983-1986 Ford Ranger submodels:

• 1983-1985: XLS; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"
• 1983-1986: XL; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1983-1986: XLT; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1983-1986: Base; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1984-1986: S; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1986-1986: STX; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

Fits 4 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, round intake ports, grooved rear main cap, block number E59, E69, head number E27E-AA; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1983-1985 Ford Ranger submodels:

• 1983-1983: Base; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"
• 1983-1984: XL; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1983-1984: XLS; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1983-1984: XLT; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1984-1984: S; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1985-1985: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number 83TM, head number 83TM, 86TM; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1983-1985 Ford Ranger submodels:

• 1983-1985: XL; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"
• 1983-1985: XLS; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1983-1985: XLT; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1983-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1984-1984: S; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, grooved rear main cap, 4 piece oil pan gasket; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1983-1986 Ford Ranger submodels:

• 1983-1985: XLS; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"
• 1983-1986: XL; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1983-1986: XLT; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1983-1986: Base; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1984-1986: S; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

• 1986-1986: STX; 4 Cyl 2.0L; "Gas, CARB, Naturally Aspirated, VIN C"

Fits 4 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, round intake ports, grooved rear main cap, block number E59, E69, head number E27E-AA; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1983-1985 Ford Ranger submodels:

• 1983-1983: Base; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"
• 1983-1984: XL; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1983-1984: XLS; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1983-1984: XLT; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1984-1984: S; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN A"

• 1985-1985: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1985: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number 83TM, head number 83TM, 86TM; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1983-1985 Ford Ranger submodels:

• 1983-1985: XL; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"
• 1983-1985: XLS; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1983-1985: XLT; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1983-1985: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

• 1984-1984: S; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN S"

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, non-roller, rear dipstick, non-grooved rear main cap, block number E59E, E69E, E7ZE, E8ZE, head number E5ZE, E6ZE, E7ZE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1985-1990 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1990: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1990: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1990: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1990: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1989-1989: GT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1990-1990: S Plus; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, RWD, grooved rear main cap, rear dipstick, block number E7ZE, E8ZE, head number E5ZE, E6ZE, E7ZE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1985-1987 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1987: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1987: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, RWD, grooved rear main cap, rear dipstick, block number E7ZE, E8ZE, head number E5ZE, E6ZE, E7ZE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1985-1987 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1987: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1987: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, 1 piece pan gasket, non-grooved rear main cap, tin oil pan, block number E59E, E69E head number E59E, E69E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1985-1987 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1987: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1987: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, 1 piece pan gasket, non-grooved rear main cap, tin oil pan, block number E59E, E69E head number E59E, E69E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1985-1987 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1987: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1987: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1987: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, non-roller, rear dipstick, non-grooved rear main cap, block number E59E, E69E, E7ZE, E8ZE, head number E5ZE, E6ZE, E7ZE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1985-1990 Ford Ranger submodels:

• 1985-1985: XLS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1985-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1985-1990: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1990: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1990: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1990: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1989-1989: GT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1990-1990: S Plus; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 7 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHC, rear dipstick, grooved rear main, tin oil pan, block number E59E, E69E, head number E59E, E69E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1986-1989 Ford Ranger submodels:

• 1986-1986: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 1986-1986: XL; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1989: S; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1989: STX; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1986-1989: XLT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1987-1989: Custom; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

• 1989-1989: GT; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN A"

Fits 5 more submodels. (Show all) Show less info