Geo Engine Parts

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- 4 bolt crank pulley; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine%X92s 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1989-1993 Geo Metro submodels:

• 1989-1993: Base; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1989-1993: LSi; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"

• 1989-1993: LSi; All Engines;

• 1989-1993: XFi; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"

• 1990-1993: XFi; All Engines;

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- 4 bolt crank pulley; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1989-1993 Geo Metro submodels:

• 1989-1993: Base; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1989-1993: LSi; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"

• 1989-1993: LSi; All Engines;

• 1989-1993: XFi; 3 Cyl 1.0L; "Gas, FI, Naturally Aspirated, VIN 6"

• 1990-1993: XFi; All Engines;

Fits 3 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 8-valve; Supplied with water pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1989-1995 Geo Tracker submodels:

• 1989-1995: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"
• 1989-1995: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 8-valve; Supplied with water pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1989-1995 Geo Tracker submodels:

• 1989-1995: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"
• 1989-1995: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; Without crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1994-1995 Geo Tracker submodels:

• 1994-1995: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1994-1995: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; Without crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1994-1995 Geo Tracker submodels:

• 1994-1995: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1994-1995: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; With crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1996-1997 Geo Tracker submodels:

• 1996-1997: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1996-1997: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 16-valve, G16K engine family; With crank position sensor; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1996-1997 Geo Tracker submodels:

• 1996-1997: Base; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"
• 1996-1997: LSi; 4 Cyl 1.6L; "Gas, FI, Naturally Aspirated, VIN 6"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FI, VIN 1ZZFE, block cast number 1ZZFE, aluminum block and heads; Supplied with front timing cover; Without variable valve timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1997 Geo Prizm submodels:

• 1997-1997: LSi; All Engines;

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FI, VIN 1ZZFE, block cast number 1ZZFE, aluminum block and heads; Supplied with front timing cover; Without variable valve timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1997 Geo Prizm submodels:

• 1997-1997: LSi; All Engines;

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1989-1991 Geo Metro submodels:

• 1989-1991: Base; All Engines;
• 1989-1991: LSi; All Engines;

• 1989-1991: XFi; All Engines;

Fits 1 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1989-1997 Geo Metro submodels:

• 1989-1994: XFi; All Engines;
• 1989-1996: LSi; All Engines;

• 1989-1997: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1989-1997 Geo Metro submodels:

• 1989-1994: XFi; All Engines;
• 1989-1996: LSi; All Engines;

• 1989-1997: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1995-1997 Geo Metro submodels:

• 1995-1995: Base; All Engines;
• 1995-1997: LSi; All Engines;

BECK-ARNLEY ENGINE MOUNT -- A High Quality, Direct-Fit OEM Replacement Engine Mount

Fits the following 1989-1995 Geo Tracker submodels:

• 1989-1995: All Submodels; All Engines;