Geo Prizm Engine Parts

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FI, VIN 1ZZFE, block cast number 1ZZFE, aluminum block and heads; Supplied with front timing cover; Without variable valve timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1997 Geo Prizm submodels:

• 1997-1997: LSi; All Engines;

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FI, VIN 1ZZFE, block cast number 1ZZFE, aluminum block and heads; Supplied with front timing cover; Without variable valve timing; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1997 Geo Prizm submodels:

• 1997-1997: LSi; All Engines;

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1989 Geo Prizm submodels:

• 1989-1989: Base; 4 Cyl 1.6L; "GAS, FI, VIN 6"

FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1989 Geo Prizm submodels:

• 1989-1989: Base; 4 Cyl 1.6L; "GAS, FI, VIN 6"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: Base; 4 Cyl 1.6L; "GAS, FI, VIN 6"
• 1993-1997: LSi; 4 Cyl 1.6L; "GAS, FI, VIN 6"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: LSi; 4 Cyl 1.8L; "GAS, FI, VIN 8"

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: All Submodels; All Engines;
• 1994-1997: Base; 4 Cyl 1.6L;

• 1994-1997: LSi; 4 Cyl 1.6L;

• 1994-1997: LSi; 4 Cyl 1.8L;

Fits 2 more submodels. (Show all) Show less info

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: Base; 4 Cyl 1.6L;
• 1993-1997: LSi; 4 Cyl 1.6L;

• 1993-1997: LSi; 4 Cyl 1.8L;

Fits 1 more submodels. (Show all) Show less info

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: All Submodels; All Engines;

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: All Submodels; All Engines;
• 1994-1997: LSi; 4 Cyl 1.8L;

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: All Submodels; All Engines;

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: Base; 4 Cyl 1.6L;
• 1993-1997: LSi; 4 Cyl 1.6L;

• 1993-1997: LSi; 4 Cyl 1.8L;

Fits 1 more submodels. (Show all) Show less info

Fits the following 1993-1997 Geo Prizm submodels:

• 1993-1997: All Submodels; All Engines;

Fits the following 1990-1992 Geo Prizm submodels:

• 1990-1992: All Submodels; All Engines;

DAYCO CURVED RADIATOR HOSE -- Curved Radiator Hose, Knitted Reinforcement And All Synthetic EPDM Construction Provides The High Strength And Resistance To Oil, Mud, Salt, Road Debris, Coolants, And Temperature, The Inner Base Tube Is Reinforced With Knitted Rayon For Maximum Strength And Burst Resistance For The Life Of The Hose

Fits the following 1990-1992 Geo Prizm submodels:

• 1990-1992: GSi; 4 Cyl 1.6L; "GAS, FI, 4AGE, VIN 5"