Hummer H2 Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- LQ4, multi-port injection, with aluminum heads; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L; "Gas, FI, Naturally Aspirated, VIN U"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- LQ4, multi-port injection, with aluminum heads; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L; "Gas, FI, Naturally Aspirated, VIN U"

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.

Fits the following 2003-2007 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

FLEXALITE ENGINE OIL COOLER KIT -- 5 in. height, 20 in. width, 3/4 in. depth; Comes with Flexalite's proprietary sandwich adapters; Complete with all hardware and easy-to-follow instructions in English, French and Spanish; Designed for moderate or auxiliary engine oil cooling applications on vehicles with spin-on filters; Supplied standard with 1/2 in. billet barbed fittings that offer more secure hose connections; With Flexalite's limited 1-year warranty.

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L;

FLEXALITE ENGINE OIL COOLER KIT -- 7 in. Height, 21 in. Width, 1 1/2 in. Depth, Designed For High-Demand Engine Oil Cooling Applications On Vehicles With Spin-On Filters, Supplied Standard With 5/8 in. Billet Barbed Fittings That Offer More Secure Hose Connections, Comes With Flexalite's Proprietary Sandwich Adapters, Complete With All Hardware And Easy-To-Follow Instructions In English, French, And Spanish, With Flexalite's 1-Year Limited Warranty

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L;

COMPLETE ENGINE ASSEMBLY, REMANUFACTURED -- Aluminum head; Includes rocker covers, oil pan, front cover and harmonic balancer; Cylinder block: Magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color, each cylinder is honed with the specified cross-hatch pattern after the block is bored, decked and chamfered; Crankshaft: Machined on a fully-automated crank grinder for consistency and critical tolerances, given a final wash for cleanliness, all oil galley holes are chamfered and brushed after machining; Connecting rods: Measured against stringent specifications for bend, twist, and center-to-center length, the piston pin bore and bearing bore are measured with air gauges for proper dimensions, installed with new torque-to-yield rod bolts and nuts; Cylinder heads: Resurfaced and completely inspected for any visible damage or cracks, valve seats are machined, inspected and replaced if necessary, valve guides are inspected with an air gauge and replaced if necessary, cam bore is checked and machined if required, used with brand new valves, seals and lifters, all plugs and fittings are replaced with new pieces to protect against possible coolant leaks; This engine is spin tested to ensure proper oil flow, pressure, torque and compression; All sealed units are tested for oil and coolant leaks; With 36-month/100,000 miles warranty when installed in passenger cars, police cars and light trucks.

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"

FLEXALITE OIL COOLER SANDWICH ADAPTER KIT -- 13/16-16 Thread Size, 1.5 Thickness, 2-1/2" O-Ring, Features New Proprietary Design In Light Weight, Matte Finish With Machined Mating Surfaces, Permits The Installation Of An Engine Oil Cooler Without Relocating The Oil Filter, With Manufacturer's Limited 1-Year Warranty

Fits the following 2003-2006 Hummer H2 submodels:

• 2003-2006: Base; 8 Cyl 6.0L;

DORMAN HARMONIC BALANCER -- Double serpentine belt type; 7.72 in. diameter, 4.75 in. width, 10.4 lbs.; With pulleys; A high quality direct fit OE replacement harmonic balancer; Replaces OE part number 12576652; With Dorman's limited lifetime warranty.

Fits the following 2003-2008 Hummer H2 submodels:

• 2003-2007: Base; 8 Cyl 6.0L; "GAS, FI, VIN U"
• 2008-2008: Base; 8 Cyl 6.2L; "GAS, FI, L92, VIN 8"