Infiniti Engine Parts

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 12-valve; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1990-1991 Infiniti M30 submodels:

• 1990-1991: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN H"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, 12-valve; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1990-1991 Infiniti M30 submodels:

• 1990-1991: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN H"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 53J, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1991-1994 Infiniti G20 submodels:

• 1991-1994: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1994-1994: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"

• 1994-1994: T; All Engines;

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 53J, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1991-1994 Infiniti G20 submodels:

• 1991-1994: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1994-1994: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"

• 1994-1994: T; All Engines;

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 94Y, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1993-1999 Infiniti G20 submodels:

• 1993-1999: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1994-1996: T; All Engines;

• 1994-1999: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 94Y, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1993-1999 Infiniti G20 submodels:

• 1993-1999: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1994-1996: T; All Engines;

• 1994-1999: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated, VIN C"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, block cast number 38U, aluminum block and heads; Does not have coolant inlet in valley of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1996-1999 Infiniti I30 submodels:

• 1996-1999: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1996-1999: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, block cast number 38U, aluminum block and heads; Does not have coolant inlet in valley of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1996-1999 Infiniti I30 submodels:

• 1996-1999: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1996-1999: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, block cast number 0W0, head cast number 0W0, cast block, aluminum heads, V-style oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1997-2000 Infiniti QX4 submodels:

• 1997-1999: Base; 6 Cyl 3.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 2000-2000: Base; 6 Cyl 3.3L; "Gas, FI, Naturally Aspirated"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- SOHC, block cast number 0W0, head cast number 0W0, cast block, aluminum heads, V-style oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1997-2000 Infiniti QX4 submodels:

• 1997-1999: Base; 6 Cyl 3.3L; "Gas, FI, Naturally Aspirated, VIN A"
• 2000-2000: Base; 6 Cyl 3.3L; "Gas, FI, Naturally Aspirated"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, block cast number 2Y9, aluminum block and heads; Has coolant inlet port in valley of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1999-2001 Infiniti I30 submodels:

• 1999-1999: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1999-1999: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"

• 2000-2001: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated"

• 2000-2001: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, block cast number 2Y9, aluminum block and heads; Has coolant inlet port in valley of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1999-2001 Infiniti I30 submodels:

• 1999-1999: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"
• 1999-1999: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN C"

• 2000-2001: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated"

• 2000-2001: T; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 2J2, roller cam followers, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 2000-2002 Infiniti G20 submodels:

• 2000-2001: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"
• 2000-2002: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"

MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, 16-valve, block cast number SR20, head cast number 2J2, roller cam followers, aluminum block and heads; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 2000-2002 Infiniti G20 submodels:

• 2000-2001: T; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"
• 2000-2002: Base; 4 Cyl 2.0L; "Gas, FI, Naturally Aspirated"

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Fits the following 1996-2001 Infiniti I30 submodels:

• 1996-1999: Base; 6 Cyl 3.0L; "GAS, FI, VQ30DE, VIN C"
• 1996-1999: T; 6 Cyl 3.0L; "GAS, FI, VQ30DE, VIN C"

• 2000-2001: Base; 6 Cyl 3.0L; "GAS, FI, VQ30DE"

• 2000-2001: T; 6 Cyl 3.0L; "GAS, FI, VQ30DE"

Fits 2 more submodels. (Show all) Show less info