Mercury Engine Parts

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number 75TM, open heat riser; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1979 Mercury Capri submodels:

• 1979-1979: Base; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN Z"
• 1979-1979: Ghia; 6 Cyl 2.8L; "Gas, CARB, Naturally Aspirated, VIN Z"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- OHV, high swirl combustion, 14 bolt oil pan, 4 water holes for wet intake, block number E43E, head number E43E; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1984-1987 Mercury Topaz submodels:

• 1984-1987: Base; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"
• 1984-1987: GS; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1984-1987: LS; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1985-1987: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1985-1987: Base; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1985-1987: GS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1985-1987: GS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1985-1987: LS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1985-1987: LS; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1987-1987: GS AWD; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1987-1987: GS AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1987-1987: GS AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1987-1987: LS AWD; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1987-1987: LS AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1987-1987: LS AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1987-1987: Sport AWD; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1987-1987: Sport AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1987-1987: Sport AWD; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1987-1987: Sport; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1987-1987: Sport; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1987-1987: Sport; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

• 1987-1987: XR5; 4 Cyl 2.3L; "Gas, CARB, Naturally Aspirated, VIN R"

• 1987-1987: XR5; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN S"

• 1987-1987: XR5; 4 Cyl 2.3L; "Gas, FI, Naturally Aspirated, VIN X"

Fits 22 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Central fuel injection, roller, head number E7EE-D4C, E7EE-D7C, E7EE-D7E, verify head cast number; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1987 Mercury Lynx submodels:

• 1987-1987: GS; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"
• 1987-1987: L; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"

• 1987-1987: XR3; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Central fuel injection, roller, head number E7EE-D4C, E7EE-D7C, E7EE-D7E, verify head cast number; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1987 Mercury Lynx submodels:

• 1987-1987: GS; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"
• 1987-1987: L; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"

• 1987-1987: XR3; 4 Cyl 1.9L; "Gas, FI, Naturally Aspirated, VIN 9"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Roller, head number RF F0EE-B7AA timing belt has round teeth, verify head cast number, round tooth timing belt; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1991-1996 Mercury Tracer submodels:

• 1991-1993: Base; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN J"
• 1991-1993: LS; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN J"

• 1991-1996: Trio; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN J"

Fits 1 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number ECZ, ECK, EDB; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1955-1962 Mercury Monterey submodels:

• 1955-1962: Base; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"
• 1962-1962: Custom; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Block number ECZ, ECK, EDB; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1955-1962 Mercury Monterey submodels:

• 1955-1962: Base; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"
• 1962-1962: Custom; 8 Cyl 4.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Solid lifter camshaft, shaft mounted rockers; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1959-1960 Mercury Country Cruiser submodels:

• 1959-1960: Base; 8 Cyl 5.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Solid lifter camshaft, shaft mounted rockers; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1959-1960 Mercury Country Cruiser submodels:

• 1959-1960: Base; 8 Cyl 5.1L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 8 bolt exhaust, block number C1AE, C2AE, C3AE, C4AE, C5AE, C6AE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1961-1962 Mercury Monterey submodels:

• 1961-1962: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- 8 bolt exhaust, block number C1AE, C2AE, C3AE, C4AE, C5AE, C6AE; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1961-1962 Mercury Monterey submodels:

• 1961-1962: Base; 8 Cyl 5.8L; "Gas, CARB, Naturally Aspirated"

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1970 Mercury Marquis submodels:

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"
• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Z"

• 1969-1970: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

• 1970-1970: Brougham; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1970 Mercury Marquis submodels:

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"
• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Z"

• 1969-1970: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

• 1970-1970: Brougham; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- With emissions holes in head, heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fits the following 1968-1970 Mercury Marquis submodels:

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"
• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Z"

• 1969-1970: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

• 1970-1970: Brougham; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

Fits 2 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- Heads do not have intake and exhaust cross-over, front crankshaft bolt 5/8 in. x 18; Without emissions equipment; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fits the following 1968-1970 Mercury Marquis submodels:

• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Y"
• 1968-1968: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN Z"

• 1969-1970: Base; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

• 1970-1970: Brougham; 8 Cyl 6.4L; "Gas, CARB, Naturally Aspirated, VIN X"

Fits 2 more submodels. (Show all) Show less info