Mitsubishi Engine Parts

1992-1999 Mitsubishi 3000GT - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC1818C

Manufacturer Number: C1818C

zoom

List Price: $2,620.34
Our Price: $2,220.63
You Save: $399.71
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $425.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- DOHC; Comes complete with adjusted valve train components, gasket set and new oil pump; With crank and cam sensors; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	After 06/1992
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1992-1999 Mitsubishi 3000GT submodels:

1992-1992: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN B"
1992-1992: SL; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN B"

1996-2000 Mitsubishi Montero - Marshall Engines Engine Long Block Premium Plus Long Block

Part Number: MEIMT34964CT

Manufacturer Number: MT34964CT

zoom

List Price: $3,278.85
Our Price: $2,778.69
You Save: $500.16
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $500.00

MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 24-valve, block cast number 6G74, oil filter mounts to front of oil pump on driver side; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Series:	Premium Plus Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1996-2000 Mitsubishi Montero submodels:

1996-1997: SR; All Engines;
1997-1997: LS; All Engines;

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15619C

Manufacturer Number: C15619C

zoom

List Price: $1,768.56
Our Price: $1,498.78
You Save: $269.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, mechanical rocker arms, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves and balance shaft elimination kit; Without pulse air; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15628C

Manufacturer Number: C15628C

zoom

List Price: $971.25
Our Price: $823.09
You Save: $148.16
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 12-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, and balance shaft elimination kit.; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15629C

Manufacturer Number: C15629C

zoom

List Price: $1,768.56
Our Price: $1,498.78
You Save: $269.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 12-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With balance shaft elimination kit; Without jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15630C

Manufacturer Number: C15630C

zoom

List Price: $1,768.56
Our Price: $1,498.78
You Save: $269.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, 1 pulse air tube left-rear of block and balance shaft elimination kit; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1988 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15620CW

Manufacturer Number: C15620C

zoom

List Price: $1,799.96
Our Price: $1,525.39
You Save: $274.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With balance shaft elimination kit; Without pulse air and jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1988 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15619CW

Manufacturer Number: C15619C

zoom

List Price: $1,799.96
Our Price: $1,525.39
You Save: $274.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, mechanical rocker arms, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves and balance shaft elimination kit; Without pulse air; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15631CW

Manufacturer Number: C15631C

zoom

List Price: $1,799.96
Our Price: $1,525.39
You Save: $274.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With 1 pulse air tube left-rear of block and balance shaft elimination kit; Without jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1988 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15620C

Manufacturer Number: C15620C

zoom

List Price: $1,768.56
Our Price: $1,498.78
You Save: $269.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With balance shaft elimination kit; Without pulse air and jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1983-1988 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15617C

Manufacturer Number: C15617C

zoom

List Price: $1,145.43
Our Price: $970.70
You Save: $174.73
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 12.500 in. wide bellhousing, mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves in head, centering ring on rear of crank, balance shaft elimination kit; Without pulse air vent tube on side of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15630CW

Manufacturer Number: C15630C

zoom

List Price: $1,799.96
Our Price: $1,525.39
You Save: $274.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, 1 pulse air tube left-rear of block and balance shaft elimination kit; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block Premium Long Block

Part Number: MEIC15631C

Manufacturer Number: C15631C

zoom

List Price: $1,768.56
Our Price: $1,498.78
You Save: $269.78
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $400.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 13-1/2 wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With 1 pulse air tube left-rear of block and balance shaft elimination kit; Without jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.

Fit Note:	RWD
Series:	Premium Long Block
Condition:	Remanufactured
Warranty:	Marshall Engine's 3-year or 100,000-mile warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15617CW

Manufacturer Number: C15617C

zoom

List Price: $1,167.11
Our Price: $989.08
You Save: $178.03
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 12.500 in. wide bellhousing, mechanical lifters; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves in head, centering ring on rear of crank, balance shaft elimination kit; Without pulse air vent tube on side of block; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

1983-1986 Mitsubishi Mighty Max - Marshall Engines Engine Long Block

Part Number: MEIC15629CW

Manufacturer Number: C15629C

zoom

List Price: $1,799.96
Our Price: $1,525.39
You Save: $274.57
Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $430.00

MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, RWD, 12-1/2 in. wide bellhousing; Comes complete with adjusted valve train components, gasket set and new oil pump; With balance shaft elimination kit; Without jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.

Fit Note:	RWD
Condition:	Remanufactured
Warranty:	Marshall Engine's Extra Protection Warranty

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

1983-1983: SP; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"
1983-1983: SPX; 4 Cyl 2.6L; "Gas, CARB, Naturally Aspirated, VIN 7"

Shop by Vehicle

Shop by Brand

Why shop with us?

Secure shopping

Fits the following 1992-1999 Mitsubishi 3000GT submodels:

Fits the following 1996-2000 Mitsubishi Montero submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1988 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1988 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Fits the following 1983-1986 Mitsubishi Mighty Max submodels:

Featured Models

Featured Makes

Payment options

Customer Service

Worry-free Shopping

Company Info

My Account