Pontiac Engine Parts

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2005-2009 Pontiac G6 submodels:

• 2008-2009: GXP; 6 Cyl 3.6L;
• 2007-2009: GT; 6 Cyl 3.9L;

• 2006-2009: Base; 4 Cyl 2.4L;

• 2005-2009: Base; 6 Cyl 3.5L;

• 2005-2009: GT; 6 Cyl 3.5L;

• 2007-2007: GTP; 6 Cyl 3.6L;

• 2006-2006: GTP; 6 Cyl 3.9L;

Fits 5 more submodels. (Show all) Show less info

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• Rear wheel drive
• Flat tappet
• 14-bolt oil pan

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, new oil pump, and emissions equipment
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Not supplied with valley pan gasket.

Fits the following 1979-1984 Pontiac Grand Prix submodels:

• 1984-1984: LE; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"
• 1981-1984: Brougham; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1984: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1983: LJ; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN A"

• 1979-1979: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

• 1979-1979: LJ; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

• 1979-1979: SJ; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN 2"

Fits 5 more submodels. (Show all) Show less info

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1981-1981 Pontiac T1000 submodels:

• 1981-1981: All Submodels; All Engines;

FELPRO PERMATORQUE HEAD GASKET SET -- Does not include head bolts; These head gaskets provide an ideal no retorque design and compress enough at installation to conform to and seal minor surface imperfections while minimizing relaxation and maintaining adequate clamping force over long time periods; Head bolt replacement recommended.

Fits the following 1955-1956 Pontiac Pathfinder submodels:

• 1955-1956: Base; 8 Cyl 4.3L; "GAS, CARB, Naturally Aspirated"

MR GASKET MANUAL TRANSMISSION GASKET KIT -- Overhaul gasket; With tail shaft seal; Made with extra thin gasket material; A reusable gasket that allows you to check transmission gears for wear without extra expense of replacement gaskets; Precision die cut for an excellent seal and fit; For use with 4-speed transmissions.

Fits the following 1971-1974 Pontiac Ventura submodels:

• 1974-1974: GTO; All Engines;
• 1973-1974: Custom; All Engines;

• 1971-1974: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

AC DELCO ENGINE CONTROL MODULE ASSEMBLY, REMANUFACTURED -- A high quality, direct fit OE replacement engine control module assembly; With 12-month or 12, 000-mile AC Delco warranty.

Fits the following 1983-1983 Pontiac J2000 submodels:

• 1983-1983: Base; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN P"
• 1983-1983: LE; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN P"

• 1983-1983: SE; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN P"

Fits 1 more submodels. (Show all) Show less info

SPECTRE ENGINE DRESS-UP KIT, CHROME -- Includes one pair of tall baffled valve covers and valve cover gaskets, eight spreader bars and T-bar hold downs, one breather, one dipstick and tube, two grommets, timing cover kit, and timing tab.

Fits the following 1977-1980 Pontiac Firebird submodels:

• 1980-1980: Trans Am; 8 Cyl 5.0L;
• 1977-1980: Base; 8 Cyl 5.0L;

• 1977-1980: Esprit; 8 Cyl 5.0L;

• 1977-1980: Formula; 8 Cyl 5.0L;

• 1978-1979: Base; 8 Cyl 5.7L;

• 1978-1979: Esprit; 8 Cyl 5.7L;

• 1978-1979: Formula; 8 Cyl 5.7L;

Fits 5 more submodels. (Show all) Show less info

WESTAR ENGINE TORQUE STRUT, SOLD INDIVIDUALLY -- This is a high quality, direct fit OE replacement engine torque strut.

Fits the following 1989-1994 Pontiac Grand Prix submodels:

• 1989-1994: SE; 6 Cyl 3.1L;
• 1991-1993: GT; 6 Cyl 3.1L;

• 1990-1993: STE; 6 Cyl 3.1L;

• 1989-1993: LE; 6 Cyl 3.1L;

• 1990-1990: Mclaren; 6 Cyl 3.1L;

• 1989-1989: Base; 6 Cyl 3.1L;

Fits 4 more submodels. (Show all) Show less info

STANDARD ENGINE CONTROL COMPUTER

A high quality, OE replacement engine control computer.

Specifications:

• 4 + 4 terminals
• Non-flashable
• Female connector
• 2 electrical connectors
• Male terminal

Fits the following 1981-1981 Pontiac Phoenix submodels:

• 1981-1981: Base; 4 Cyl 2.5L; "VIN 5"
• 1981-1981: LJ; 4 Cyl 2.5L; "VIN 5"

DEA Products
DEA Products is a supplier of OEM quality chassis components and engine mounts for the automotive aftermarket.

Fits the following 1986-1994 Pontiac Sunbird submodels:

• 1986-1994: All Submodels; All Engines;
• 1991-1991: LE; 4 Cyl 2.0L;

• 1991-1991: SE; 4 Cyl 2.0L;

• 1991-1991: Value Leader; 4 Cyl 2.0L;

Fits 2 more submodels. (Show all) Show less info

EDELBROCK POWER PACKAGE TOP END KITS -- Includes Performer RPM hydraulic cams and lifters, 2 performer RPM heads, Timing cover and seal set, cylinder head gasket and seal set, RPM Air-gap intake manifold, intake manifold kit, and cylinder head bolt set; With Edelbrock's limited 1-year warranty.

Fits the following 1978-1986 Pontiac Grand Prix submodels:

• 1984-1986: LE; 8 Cyl 5.0L;
• 1983-1986: Brougham; 8 Cyl 5.0L;

• 1978-1986: Base; 8 Cyl 5.0L;

• 1978-1983: LJ; 8 Cyl 5.0L;

• 1978-1980: SJ; 8 Cyl 5.0L;

Fits 3 more submodels. (Show all) Show less info

VICTOR REINZ ENGINE GASKET SET -- Cylinder head type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1977-1979 Pontiac Phoenix submodels:

• 1978-1979: LJ; 8 Cyl 5.7L;
• 1978-1979: SJ; 8 Cyl 5.7L;

• 1977-1979: Base; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

ANCHOR ENGINE TORQUE STRUT MOUNT -- Engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function; Premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability; With 12-month Anchor warranty.

Fits the following 1990-1995 Pontiac Trans Sport submodels:

• 1992-1995: Base; 6 Cyl 3.1L;
• 1992-1995: Base; 6 Cyl 3.8L;

• 1990-1991: Base; All Engines;

Fits 1 more submodels. (Show all) Show less info

Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.

Fits the following 1994-1995 Pontiac Firebird submodels:

• 1994-1995: Formula; 8 Cyl 5.7L;
• 1994-1995: Trans Am; 8 Cyl 5.7L;

• 1994-1994: Trans Am GT; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

BLUE PRINT ENGINE ASSEMBLY, DRESSED, NEW

Blue Print Engine Assembly is completely balanced, blueprinted, and dyno-tested. Comes complete with a fuel system, ignition system, and water and fuel pumps. Tested, analyzed, and ensures predictable and reliable performance.

Specifications:

• 1.44 in. diameter valve springs
• 2.02 in. swirl polished intake valves
• 1.6 in. swirl polished exhaust valves
• 380 ft./lbs. of torque
• 9.5:1 compression ratio
• Dyno tested to produce 360 h.p.
• 4 bolt main block
• Square and parallel decked
• Align honed main bearing bore
• Hardened push rods, retainers, and springs
• Flat tappet hydraulic lifter
• New Dart aluminum cylinder heads
• Includes Professional Products dual plane satin finish intake manifold, Edelbrock 600 cfm carburetor, Signature series aluminum valve covers, and brass freeze plugs

Features:

• 110 degree lobe separation
• Duration at 0.05 in. lift is 224 intake/230 exhaust and maximum lift of 0.48 in. intake/0.49 in. exhaust
• Ignition timing: 13 to 16 degree initial/34 degree total timing advance
• Balanced within 2g on a computerized balancer
• Cylinders are sonic tested for thickness and honed on a computer controlled machine to within 0.0002 in. straightness and roundness
• New Scat cast crankshaft, new Scat I-beam rods, Keith Black hypereutectic pistons with Hastings moly rings, Melling high volume oil pump, and heavy duty double roller timing set

Driver side dipstick sold separately.

Fits the following 2004-2004 Pontiac GTO submodels:

• 2004-2004: Base; 8 Cyl 5.7L; "GAS, CARB, Naturally Aspirated"